Steel and Composite Structures

  • 제10권2호
  • /
  • Pages.169-185
  • /
  • 2010
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental analysis on steel and lightweight concrete composite beams

  • Valente, Isabel B. (ISISE, Department of Civil Engineering, University of Minho Azurem) ;
  • Cruz, Paulo J.S. (ISISE, Department of Architecture, University of Minho Azurem)
  • 투고 : 2009.08.06
  • 심사 : 2010.03.11
  • 발행 : 2010.03.25
⟨ 이전 논문 다음 논문 ⟩

초록

The present work describes the experimental tests on steel and lightweight concrete composite beams performed at University of Minho, Portugal. The study involves tests on simply supported composite beams of 4.5 m span, with the same geometrical disposition, supports and materials. The geometrical configuration for the cross section and supports is identical for every beam, varying the shear connectors' distribution and the loading conditions. Headed studs are used to provide the connection between the steel profile and the concrete slab. The parameters in study are the stud disposition and the load distribution. The main objective is to describe the composite beams behaviour, focused on its connection, and to analyse the contribution of the different components to the beams load and deformation capacity. All the tests explored the beams maximum load and deformation capacity and different types of failure were observed.

키워드

참고문헌

  1. BE96-3942/R1 (1998), Eurolightcon - economic design and construction with light weight aggregate concrete: definitions and international consensus report, 69.
  2. Doinghaus, P. (2001), Zum zusammenwirken hochfester baustoffe in verbundkonstruktionen, Ph.D. Thesis, Institute of Structural Concrete, RWTH Aachen.
  3. EN 10002-1 (2001): Metallic materials. Tensile testing. Part 1: method of test at ambient temperature, European Committee for Standardisation (CEN).
  4. EN 1992-1-1 (2004): Design of concrete structures. Part 1-1: general rules and rules for buildings, European Committee for standardization (CEN).
  5. EN 1993-1-1 (2005): Design of steel structures. Part 1-1: general rules and rules for buildings, European Committee for standardization (CEN).
  6. EN 1994-1-1 (2004): Design of composite steel and concrete structures. Part 1-1: general rules and rules for buildings, European Committee for standardization (CEN).
  7. Guo-Qiang Li, Tao-Chun Yang and Su-Wen Chen (2009), "Behavior and simplified analysis of steel-concrete composite beams subjected to localized blast loading", Struct. Eng. Mech., 32(2), 337-350. https://doi.org/10.12989/sem.2009.32.2.337
  8. Hegger, J., Sedlacek, G., Döinghaus, P. and Trumpf, H. (2001), "Studies on the ductility of shear connectors when using high-strength concrete", Int. Symp. Connect. Steel. Concrete., University of Stuttgart, 2, 1025-1045.
  9. Lee, P.G., Shim, C.S. and Chang, S.P. (2005), "Static and fatigue behavior of large stud shear connectors for steel-concrete composite bridges", J. Construct. Steel. Res., 61(9), 1270-1285. https://doi.org/10.1016/j.jcsr.2005.01.007
  10. Nie, J. and Cai, C.S. (2005), "Steel-Concrete Composite Beams Considering Shear Slip Effects", J.Struct.Eng.- ASCE, 129(4) 96-107.
  11. Nie, J., Xiao, Y., Tan, Y. and Wang, H. (2004), "Experimental studies on behaviour of composite steel highstrength concrete beams", ACI Struct. J., 101(2), 245-251.
  12. Oehlers, D.J., Nguyen, N.T., Ahmed, M. and Bradford, M.A. (1997), "Partial interaction in composite steel and concrete beams with full shear connection", J. Constr. Steel. Res., 41(2-3), 235-248. https://doi.org/10.1016/S0143-974X(97)80892-9
  13. Valente, I.B. and Cruz, P.J.S. (2009), "Experimental analysis of shear connection between steel and lightweight concrete", J. Constr. Steel. Res., 65(10-11), 1954-1963. https://doi.org/10.1016/j.jcsr.2009.06.001
  14. Yen, J.Y. Richard, Lin, Y. and Lai, M. T. (1997), "Composite beams subjected to static and fatigue loads", J. Struct. Eng. -ASCE, 123(6), 765-771. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:6(765)

피인용 문헌

  1. Static push-out test on steel and recycled tire rubber-filled concrete composite beams vol.19, pp.4, 2015, https://doi.org/10.12989/scs.2015.19.4.843
  2. Fatigue behavior of stud shear connectors in steel and recycled tyre rubber-filled concrete composite beams vol.22, pp.2, 2016, https://doi.org/10.12989/scs.2016.22.2.353
  3. Probabilistic-based assessment of composite steel-concrete structures through an innovative framework vol.20, pp.6, 2016, https://doi.org/10.12989/scs.2016.20.6.1345
  4. Uni-axial behaviour of normal-strength concrete-filled-steel-tube columns with external confinement vol.3, pp.6, 2012, https://doi.org/10.12989/eas.2012.3.6.889
  5. Push-out test on the one end welded corrugated-strip connectors in steel-concrete-steel sandwich structure vol.24, pp.1, 2010, https://doi.org/10.12989/scs.2017.24.1.023
  6. Finite element model for interlayer behavior of double skin steel-concrete-steel sandwich structure with corrugated-strip shear connectors vol.27, pp.1, 2018, https://doi.org/10.12989/scs.2018.27.1.123
  7. Shear bond behavior of composite slabs with ultra-lightweight cementitious composite vol.44, pp.None, 2010, https://doi.org/10.1016/j.jobe.2021.103284