Steel and Composite Structures

  • 제10권1호
  • /
  • Pages.87-108
  • /
  • 2010
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A parametric study on buckling loads and tension field stress patterns of steel plate shear walls concerning buckling modes

  • Memarzadeh, P. (Department of Civil Engineering, Isfahan University of Technology) ;
  • Azhari, M. (Department of Civil Engineering, Isfahan University of Technology) ;
  • Saadatpour, M.M. (Department of Civil Engineering, Isfahan University of Technology)
  • 투고 : 2007.02.14
  • 심사 : 2010.01.08
  • 발행 : 2010.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

A Steel Plate Shear Wall (SPSW) is a lateral load resisting system consisting of an infill plate located within a frame. When buckling occurs in the infill plate of a SPSW, a diagonal tension field is formed through the plate. The study of the tension field behavior regarding the distribution and orientation patterns of principal stresses can be useful, for instance to modify the basic strip model to predict the behavior of SPSW more accurately. This paper investigates the influence of torsional and out-of-plane flexural rigidities of boundary members (i.e. beams and columns) on the buckling coefficient as well as on the distribution and orientation patterns of principal stresses associated with the buckling modes. The linear buckling equations in the sense of von-Karman have been solved in conjunction with various boundary conditions, by using the Ritz method. Also, in this research the effects of symmetric and anti-symmetric buckling modes and complete anchoring of the tension field due to lacking of in-plane bending of the beams as well as the aspect ratio of plate on the behavior of tension field and buckling coefficient have been studied.

키워드

참고문헌

  1. Astaneh-Asl, A. (2001), Seismic behavior and design of steel plate shear walls, Steel TIPS Report, Structural Steel Educational Council, July, Moraga, CA.
  2. Berman, J. and Bruneau, M. (2003), "Plastic analysis and design of steel plate shear walls", J. Struct. Eng. ASCE, 129, 1448-1456. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:11(1448)
  3. Budynas, R.G., (1977), Advanced Strength and Applied Stress Analysis, Mc Graw-Hill.
  4. Caccese, V., Elgaaly, M. and Chen, R. (1993), "Experimental study of thin steel-plate shear walls under cyclic load", J. Struct. Eng.ASCE, 119(2),573-587. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:2(573)
  5. Canadian Standard Association, CAN/CSA S16-01, (2001), Limit States Design of Steel Structures, Toronto, Ontario.
  6. Driver, R.G., Kulak, G.L., Kennedy, D.J.L. and Elwi, A.E. (1997), Seismic behaviour of steel plate shear walls, Structural Engineering Report No. 215, Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Canada.
  7. Driver, R.G., Kulak, G.L., Kennedy, D.J.L. and Elwi, A.E. (1998a), "Cyclic test of a four-storey steel plate shear wall", J. Struct. Eng. ASCE, 124(2), 112-120. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(112)
  8. Driver, R.G., Kulak, G.L., Elwi, A.E. and Kennedy, D.J.L. (1998b), "FE and simplified models of steel plate shear wall", J. Struct. Eng. ASCE, 124(2), 121-130. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(121)
  9. Elgaaly, M., Caccese, V. and Du, C. (1993a), "Postbuckling behaviour of steel-plate shear walls under cyclic loads", J. Struct. Eng. ASCE, 119(2), 588-605. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:2(588)
  10. Elgaaly, M., Caccese, V. and Martin, D.K. (1993b), Experimental investigation of the behaviour of bolted thin steel plate shear walls, Civil Engineering Department, University of Main, Orono, Main.
  11. Elgaaly, M., Caccese, V. and Du, C. (1994), "Closure to Postbuckling behaviour of steel-plate shear walls under cyclic loads", J. Struct. Eng. ASCE, 120(7), 2251-2255. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:7(2251)
  12. Kennedy, D.J.L., Kulak, G.L. and Driver, R.G. (1994), "Discussion of Postbuckling behaviour of steel-plate shear wall under cyclic loads", J. Struct. Eng. ASCE, 120(7), 2250-2251. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:7(2250)
  13. Kuhn, P., Peterson, J.P. and Levin, L.R. (1952), A summary of diagonal tension, part I Methods of analysis, Technical Note 2661, National Advisory Committee for Aeronautics, Washington, D.C.
  14. Kulak, G.L., Kennedy, D.J.L. and Driver, R.G. (1994), "Discussion of Experimental study of thin steel-plate shear walls under cyclic load", J. Struct. Eng.ASCE, 120(10), 3072-3073. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:10(3072)
  15. Lubell, A.S. (1997), Performance of unstiffened steel plate shear walls under cyclic Quasi-static loading, M.A.Sc. Thesis, Department of Civil Engineering, University of British Columbia, Vancouver, BC, Canada.
  16. Lubel, A.S., Prion, H.G.L., Ventura, C.E. and Rezai, M. (2000), "Unstiffened steel plate shear wall performance under cyclic loading", J. Struct. Eng. ASCE, 126(4), 453-460. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(453)
  17. Reddy, J.N. (2002), Energy Principles and Variational Methods in Applied Mechanics, 2nd edition, Wiley.
  18. Rezai, M. (1999), Seismic behavior of steel plate shear walls by shake table testing, PhD Dissertation, Department of Civil Engineering, University of British Columbia, Vancouver, BC, Canada.
  19. Rezai, M., Ventura, C.E. and Prion, H.G.L. (2000), "Numerical investigation of thin unstiffened steel plate shear walls", Proc., World Conf. of Earthquake Engineering, pp. 0801-10801-8.
  20. Shishkin, J.J., Driver, R.G. and Grondin, G.Y. (2005), Analysis of steel plate shear walls using the modified strip model, Structural Engineering Report No. 261, University of Alberta, Canada.
  21. Smith, S.T., Bradford, M.A. and Oehlers, D.J. (1999), "Elastic buckling of unilaterally constrained rectangular plates in pure shear", Eng. Struct., 21, 443-453. https://doi.org/10.1016/S0141-0296(97)00218-6
  22. Thorburn, L.J., Kulak, G.L. and Montgomery, C.J. (1983), Analyses of steel plate shear walls, Structural Engineering Report No. 107, University of Alberta, Canada 1983.
  23. Timler, P.A. and Kulak, G.L. (1983), Experimental study of steel plate shear walls, Structural Engineering Report No. 114, Department of Civil Engineering, University of Alberta, Edmonton, Canada.
  24. Timoshenko, S. and Gere, J.M. (1963), Theory of Elastic Stability, Mc Graw-Hill, New York, USA.
  25. Tromposch, E.W. and Kulak, G.L. (1987), Cyclic and static behaviour of thin steel shear walls, Structural Engineering Report No. 145, Department of Civil Engineering, University of Alberta, Edmonton, Canada.
  26. Varadan, T.K. and Bhaskar, K. (1999), Analysis of Plates, Narosa Publishing House, New Delhi, India.
  27. Wagner, H. (1931), Flat sheet metal girders with very thin webs, Part I-General theories and assumptions, Technical Memo No. 604, National Advisory Committee for Aeronautics, Washington, D.C.

피인용 문헌

  1. Development of a simplified equivalent braced frame model for steel plate shear wall systems vol.18, pp.3, 2015, https://doi.org/10.12989/scs.2015.18.3.711
  2. Experimental investigation of thin steel plate shear walls with different infill-to-boundary frame connections vol.11, pp.3, 2011, https://doi.org/10.12989/scs.2011.11.3.251
  3. Behavior of FRP-reinforced steel plate shear walls with various reinforcement designs vol.33, pp.5, 2019, https://doi.org/10.12989/scs.2019.33.5.729