한국의류학회지 (Journal of the Korean Society of Clothing and Textiles)

  • 제34권11호
  • /
  • Pages.1798-1811
  • /
  • 2010
  • /
  • 1225-1151(pISSN)
  • /
  • 2234-0793(eISSN)
한국의류학회 (The Korean Society of Clothing and Textiles)
권호 표지
DOI QR코드

DOI QR Code

고밀도 직물의 반복세탁 및 세탁조건에 따른 투습.발수성 변화

Changes in Moisture Permeability and Waterproofness of High-density Fabric by Repeated Laundering and Condition

  • 노의경 (연세대학교 의류환경학과) ;
  • 한정은 (연세대학교 의류환경학과) ;
  • 김은애 (연세대학교 의류환경학과)
  • Roh, Eui-Kyung (Dept. of Clothing & Textiles, Yonsei University) ;
  • Han, Jung-Eun (Dept. of Clothing & Textiles, Yonsei University) ;
  • Kim, Eun-Ae (Dept. of Clothing & Textiles, Yonsei University)
  • 투고 : 2010.08.23
  • 심사 : 2010.11.15
  • 발행 : 2010.11.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This research evaluates the changes in the comfort-related properties of high-density fabric, such as moisture permeability and waterproofness, in order to assess the relative importance of laundry conditions for clothing properties after repeated laundering and suggest the best laundering conditions for high-density fabric through the identification of the most influential factor. A commercial high-density fabric was washed 25 times in a drum-type washer using nine different laundry conditions based on profiles derived from a fractional factorial design. To evaluate the changes in the comfort-related properties of the fabric, pore size, air permeability, water vapor transport, water repellency, and water resistance were measured. The comfort-related properties of the fabric deteriorated after repeated laundering by the damaged surface finish; in addition, the damaged surface also changed the pore size. As a result, the water repellency and water resistance decreased. The detergent was the most responsible factor to change the properties among the four factors of detergent, hardness, temperature, and RPM. The best laundering conditions for the fabric was a neutral detergent, soft water of 70ppm, a temperature of $15^{\circ}C$, and 30rpm.

키워드

참고문헌

  1. 김기정. (1987). 투습성 방수가공. 한국섬유공학회지, 24(6), 153-162.
  2. 김성련. (2000). 세제와 세탁의 과학(개정판). 서울: 교문사.
  3. 김은애, 유신정. (2004). 투습방수소재 및 평가기술. 섬유기술과 산업, 8(3), 271-285.
  4. 남기대. (1994). 계면활성제. 서울: 수서원.
  5. 문규열. (1970). 섬유의 습윤과 발수가공. 한국섬유공학회지, 7(2), 56-63.
  6. 유필화. (1994). 현대의 마케팅과학. 서울: 법문사.
  7. 오경화, 윤재희. (2004). 지용성 오염과 반복세탁에 따른 극세섬유직물의 역학적 특성 변화와 흡수성에 관한 연구. 한국섬유공학회지, 41(5), 328-334.
  8. 울삼푸 아웃도어 신제품 출시. (2008, 12. 3). 애경. 자료검색일 2010, 8.30, 자료출처 http: www.aekyung.co.kr
  9. 이방원, 박병기, 김환철, 정윤숙, 이화선. (1997). 불소수지를 이용한 분할형 PET/nylon 직물의 발수가공. 한국염색가공학회지, 9(4), 213-218.
  10. 정경자, 최석철. (1994). 투습성 방수포의 세탁방법에 따른 물성 변화에 관한 연구. 한국의류학회지, 18(5), 674-681.
  11. 조지현, 류덕환. (2000). 투습방수 코팅소재의 반복세탁에 따른 촉감 및 봉제 외관성능의 변화. 한국생활과학회지, 9(1), 33-45.
  12. 조호현, 서말용, 박성우, 김경렬, 김삼수, 조대현. (2001). 고기능성 신합섬 소재. 대구: 한국섬유개발연구원.
  13. 한정은, 노의경, 김은애. (2010). PU 코팅소재의 반복세탁에 의한 세제잔류와 쾌적성능 변화. 한국의류학회 춘계학술대회 초록집, 57.
  14. $Gore-tex^{{\circledR}}$ brand 제품 관리법. (2004). 고어코리아. 자료검색일 2010, 4.22, 자료출처 http://www.goretex.co.kr
  15. Brysson, R. J., Piccolo, B., & Walker, A. M. (1971). Calcium-phosphorus deposition during home laundering. Textile Research Journal, 41 (1), 86-87.
  16. Deffosse, J. C., & Carfano, P. P. (1974). Effect of laundry practices on the flame retardance of fabrics. Textile Chemists and Colorists, 6, 25-29.
  17. Desa, V. M., & Athawale, V. D. (1995). Water resistant-breathable hydrophilic polyurethane coatings. Journal of Industrial Textiles, 25(1), 39-46. https://doi.org/10.1177/152808379502500105
  18. Gibson, P. W. (2000). Effect of temperature on water vapor transport through polymer membrane laminates. Polymer Test, 19(6), 673-691. https://doi.org/10.1016/S0142-9418(99)00040-9
  19. Green, P. E., & Srinivasan, V. (1978). Conjoint analysis in consumer research: Issues and outlook. Journal of Consumer Research, 5(2), 103-123. https://doi.org/10.1086/208721
  20. Gretton, J. C., Brook, D. B., Dyson, H. M., & Harlock, S. C. (1998). Moisture vapor transport through waterproof breathable fabrics and clothing systems under a temperature gradient. Textile Research Journal, 68(12), 936-941. https://doi.org/10.1177/004051759806801209
  21. Huang, J. (2007). Review of test methods for measuring water vapor tranfer proerties of fabrics. Cellular polyrners, 26(3), 167-191.
  22. Lee, S. M., Kimura, D., Lee, K. H., Park, J. C., & Kinl, I. S. (2010). The effect of laundering on the thermal and water transfer properties of mass-produced laminated nanofiber web for use in wear. Textile Research Journal, 80(2), 99-105. https://doi.org/10.1177/0040517508102308
  23. Lee, S. M., Kimura, D., Yokoyama, A., Lee, K. H., Park, J. C., &Kim, I. S. (2009). The effects of laundering on the mechanical properties of mass-produced nanofiber web for use in wear. Textile Research Journal, 79(12), 1085-1090. https://doi.org/10.1177/0040517508101622
  24. Leonas, K. K. (1998). Effect of laundering on the barrier properties of reusable surgical gown fabric. Arnerican Journal of Infection Control, 26(5), 495-501. https://doi.org/10.1016/S0196-6553(98)70022-7
  25. Li, Y., & Holcombe, B. V. (1998). Mathematical sinlulation of heat and moisture transfer in a human-clothing-environment system. Textile Research Journal, 68(6), 389-397. https://doi.org/10.1177/004051759806800601
  26. Lin, C. Y., Liao, K. H., Su, C. F., Kuo, C. H., & Hsieh, K. H. (2007). Smart temperature-controlled water vapor permeable poly urethane film. Journal of Membrane Science, 299, 91-96. https://doi.org/10.1016/j.memsci.2007.04.028
  27. Lomax, G. R. (1985). The design of waterproof, water vapour-permeable fabrics. Journal of lndustrial Textiles, 15(1), 40-66. https://doi.org/10.1177/152808378501500105
  28. MaCullough, E. A., Kwon, M., & Shim, H. (2003). A comparison of standard methods for measuring water vapour permeability of fabrics. Measurement Science and Technology, 14(8), 1402-1408. https://doi.org/10.1088/0957-0233/14/8/328
  29. Marple, W. L. (1972). Evaluation of the rinsing process. In M. J. Schick & F. M. Fowkes (Series Ed.), W. G. Cutler & R. C. Davis (Vol. Ed.), Surfactant science series: Vol. 4. Deterency: Theory and test methods Part II. New York: M. Dekker.
  30. Ozcan, G. (2007). Performance evaluation of water repellent finishes on woven fabric properties. Textile Research Journal, 77(4), 265-270. https://doi.org/10.1177/0040517507080619
  31. Rhee, H., Young, R. A., & Sarmadi, A. M. (1993). The effect of functional finishes and laundering on textile materials Part II: Characterization of liquid flow. Journal of the Textile lnstitute, 84(3), 406-418. https://doi.org/10.1080/00405009308658973
  32. Qi, H. J., Sui, K. Y., Ma, Z. L., Soo, X. Q., & Lu. J. J. (2002). Polymeric flurocarbon-coated polyester substrates for waterproof breathable fabric. Textile Research Journal, 72(2), 93-97. https://doi.org/10.1177/004051750207200201

피인용 문헌

  1. Physical Properties of Vapor-Permeable Waterproof Fabrics by Ultrasonic Welding and Seam Sealing vol.50, pp.1, 2013, https://doi.org/10.12772/TSE.2013.50.048
  2. Changes in Absorbency and Drying Speed of a Quick-drying Knit Fabric by Repeated Laundering vol.34, pp.12, 2010, https://doi.org/10.5850/JKSCT.2010.34.12.2062
  3. Effect of Washing Conditions on Dimensional Change and Mechanical Properties in Polyester/Spandex Knit Fabric vol.20, pp.1, 2018, https://doi.org/10.5805/SFTI.2018.20.1.93