참고문헌
- Cho, J. J., Kim, S. I., and Choi, D. B., 1993, "The dynamic analysis of spindle with a built-in motor," Proc. of KSPE Autumn Conference, pp. 91-95.
- Park, K. B., Chung W. J., and Lee, C. M., 2007, "Model updating of high-speed spindle," Transactions of the Korean Society of Machine Tool Engineers, Vol. 17, No. 2, pp. 7-12.
- Moon, J. D., Kim, B. S., and Lee, S. H., 2006, "Development of the active balancing device for high-speed spindle system using influence coefficient," International Journal of Machine Tools & Manufacture, Vol. 46, No. 9, pp. 978-987. https://doi.org/10.1016/j.ijmachtools.2005.07.048
- Altintas, Y. and Cao, Y., 2005, "Virtual design and optimization of machine tool spindles," Annals of ClRP, Vol. 54, No. 1, pp. 379-382. https://doi.org/10.1016/S0007-8506(07)60127-9
- Altintas, Y. and Week, M., 2004, "Chatter stability of metal cutting and grinding," Annals of CIRP, Vol. 53, No. 2, pp. 619-642. https://doi.org/10.1016/S0007-8506(07)60032-8
- Schulz, H. and Wurzb, T., 1998, "Balancing Requirements for Fast Rotating Tools and Spindle Systems," Annals of ClRP, Vol. 47, No. 1, pp. 321-324. https://doi.org/10.1016/S0007-8506(07)62842-X
- Cao, Y., 2006, Modeling of High speed machine tool spindle systems, Doctor of Philosophy, The University of British Columbia, Canada.
-
Leeno Industrial inc., n.d., viewed 5 August 2009,
-
Hanwha TechM, n.d., viewed 3 April 2009,
. - Lee, J. H., Kim, M. S., Park, S. H., and Lee, S. B., 2008, "A study on natural vibration characteristics of small and high speed spindle system with a long workpiece," Proc. of the KSNVE Annual Autumn Conference, pp. 184-185.
- Lee, J. H., Kim, M. S., Park, S. H., and Lee, S. B., 2008, "Natural vibration characteristics of the high speed spindle system with a long work piece due to supporting conditions of bar-feeders based on using FEM analysis," Proc. of KSPE Autumn Conference, pp. 585-586.