동력기계공학회지 (Journal of Power System Engineering)

  • 제14권6호
  • /
  • Pages.47-53
  • /
  • 2010
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지

수송기계용 Stabilizer Link의 광센서를 이용한 부품성능평가

Analyzing Materials Property using Optical Sensing Technique of Stabilizer Link for Automobile Parts

  • 투고 : 2010.09.07
  • 심사 : 2010.11.08
  • 발행 : 2010.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A stabilizer link connects the stabilizer bar to the lower arm of the suspension. When a vehicle is turning, lateral forces from the tire are transmitted through the stabilizer link into the stabilizer bar. The stabilizer bar will twist, thus adding rigidity to the vehicle body. In this study, the stabilizer link body was manufactured by using composite material with POM-GF25%. Therefore, the strength evaluation of stability link body with composite material carried out from tensile, wear and fatigue test. The tensile strength between the stability link body with composite material and the rod with knurling was the largest of four types of rod. In Analyzing materials property using optical sensing technique of stabilizer link for automobile parts, its has been identified the safety.

키워드

참고문헌

  1. H. Adams, 1992, "Chassis Engineering",
  2. S. W. Lim, 2008, Advanced Technology for Lightweight Automobile", Journal of the Korean Society for Heat Treatment, Vol. 21, No. 3, pp. 164-170.
  3. S. W. Choi, 2008, "Trend of Lightweight Automobile", Korea Automotive Research Institute.
  4. C. Fremgen, L. Mkrtchyan, U. Huber and M> Maier, 2005, "Modeling and Testing of Energy Absorbing Lightweight Materials and Structures for Automotive Applications", Science and Technology of Advanced Materials, Vol. pp. 883-888.
  5. S. C. Wang, X. Cui and L. Zhang., 2008, "Lightweight Automotive Doors Design Including Material and Manufacturing Process Selection", Inter. J. Manufacturing Technology and Management, Vol. 14, No. 1-2, pp. 118-129. https://doi.org/10.1504/IJMTM.2008.017490
  6. P. Zhu, Y. Zhang. and G. L. Chen., 2009, "Metamodel-based Lightweight Design of an Automotive Front-body Structure using Robust Optimization", Journal of Automobile Engineering, Vol. 223, pp. 1133-1147. https://doi.org/10.1243/09544070JAUTO1045
  7. E S Palma1, E. S. and Santos, dos E. S., 2002, "Fatigue Damage Analysis in an Automobile Stabilizer bar", Journal of Automobile Engineering, Vol. 216, pp. 865-871. https://doi.org/10.1243/095440702321031414
  8. H. J. Kim, 2007, "Trend and Prediction of Automobile Suspension in USA", KOTRA Report.
  9. S. M. Ageev and G. G. Proskunov, 1977, "Testing Automobile Weighing Machines", Measurement Techniques, Vol. 20, No. 2, pp. 298-299.
  10. S. K. Lee, B. S. Kim, 1996, "Composite applications to automobiles", Auto Journal, Vol. 18, No. 5, pp. 96-120.
  11. S. K. Lee, 1997, "Compisite of Vehicle Parts″, Journal of the KSME, Vol. 39, No. 2, pp. 91-100.
  12. J. W. Lee, 2007, "Polymer Compisite of Vehicle Parts″, Korea Institute of Science and Technology Information.
  13. D. G. Lee, 2006, "Design and Manufacturing of Composite Automotive Parts", Auto Journal, Vol. 29, No. 1, pp. 27-33.