The Properties of Rice Flours Prepared by Dry and Wet Milling Method

건식과 습식 제분조건에 따른 멥쌀가루의 특성

  • Kim, Eun-Mi (Kimpo College, Department of Hotel Culinary Arts)
  • Received : 2010.09.02
  • Accepted : 2010.10.27
  • Published : 2010.12.31

Abstract

The purpose of this research was to compare the physicochemical compositions and morphological properties of five varieties of rice flours (RR, RGD, RSGD, RWDG, RWGD). RR was raw milled rice without washing, RGD was raw rice flour without soaking, RSGD was raw milled rice flour with 0 hr of soaking, RWDG was raw rice flour with 8 hr of soaking and grinding after drying, and RWGD was raw rice flour with 8hr of soaking and drying after grinding. The protein and lipid contents of wet milling rice flour (RSGD, RWDG, RWGD) were significantly lower than those of dry milling rice flour (RR, RGD). L and a values were significantly increased in wet milling rice flour, and b value was significantly increased in dry milling rice flour. Scanning electron microscopy (SEM) showed that RWDG and RWGD were distributed as separated fine particles in rice flours. The WBC of RWDG and RWGD were higher than those of other rice flours. Solubility was significantly increased according to the temperature, and swelling power of RWDG was higher than that of other rice flours at 50 and $60^{\circ}C$. Using RVA, the initial pasting temperature and setback of RWDG were lower and the peak viscosities of RSGD and RWDG were higher than those of other rice flours. Using a mixograph, peak times were not significantly different among the groups, wheras peak heights were significantly decreased in RSGD, RWDG, and RWGD. The peak width of RWGD was lower than those of other rice flours. Based on these findings, RWDG flour was less damaged, and had a lower setback and pasting temperature, which makes it an appropriate rice flour for commercial mass production.

Keywords

References

  1. 김상숙, 2006. 쌀을 이용한 고품질 베이커리 신제품 개발. 핵심전략기술개발사업 연차 실적 보고서. 1차년도. 한국식품연구원. 경기. pp 143-146
  2. 김은미. 2009. 지역농산물 가공기술 및 가공품 개발 최종 보고서. 김포농업기술센터. 김포. p11
  3. 농림수산식품부. http://www.mifaff.go.kr/USR/WPGE0201/m_119/DTL.jsp 2010.7.27
  4. 이철호, 채수규, 이진근, 박봉상. 1999. 식품공업품질관리론. 유림문화사, 서울. pp 80-84
  5. AACC. 1995. Approved Methods of AACC. 9th ed., 54-40, American Association of cereal Chemists. St. Paul, MN, USA
  6. AOAC. 1990. Office Methods of Analysis of AOAC. Iatl, 16th ed.. Association of Official Analytical Chemists. Artington, VA, USA
  7. Chang HG, Kim JY. 2004. Physicochemical characteristics and sugar-snap cookie potentialities of Korean wheats. Korean J Food Sci Technol 36(5):754-760
  8. Choe JS, Ahn HH, Nam HJ. 2002. Comparison of nutritional composition in Korean rices. J Korean Soc Food Sci Nutr 31(5) :885-892 https://doi.org/10.3746/jkfn.2002.31.5.885
  9. Choi CR. 2002. The properties of rice flours and Garedduk with resistant starches. Ph D. Disseration. Chonnam National University. pp 46-50
  10. Esau K. 1997. Anatomy of seed plants. 2nd.ed. John Wiley & Sons Inc. USA
  11. Hall VL. Johnson JR. 1966. A revised starch-iodine blue test for raw milled rice. Cereal Chem 43:297-302
  12. Hunter RS. 1975. The measurement of Appearance. John Wiley & Sons. New York, NY. pp 139-141
  13. ICC. 1994. International Association for Cereal Science and Technology. Rapid pasting method using the Rapid Visco Analyser, ICC-Standard Draft, Vienna
  14. Juliano BO. 1985a. Physicochemical properties of rice. pp 175-205. In : Rice Chemistry and Technology. AACC. St. Paul, MN. USA
  15. Juliano BO. 1985b. Criteria and tests for rice grain qualities. pp 443-524 In : Rice Chemistry and Technology. AACC. St. Paul, MN. USA
  16. Kim BS, Park NH, Jo KS, Kang TS, Shin DH. 1988. Composition of quality stability of rice and rice flour during storage. Korean J Food Sci Technol 20(4):498-503
  17. Kim DS, Kim SL, Song J, Hur OS, Kim JT, Lee CK, Kim JH, Kim KJ, Suh SJ. 2008. Composition in milling recovery ratio of rice cultivars, Ilpumbyeo and Chucheongbyeo. Korean J. Crop Sci 53(3):308-313
  18. Kim HY, Lee BY, Choi JK, Ham SS. 1999A. Milling and rice flour properties of soaking in water time on moisture content of rice. Korean J Postharvest Sci Technol 6(1):71-75
  19. Kim HY, Lee BY, You HS, Choi JK, Ham SS. 1999B. Properties of rice flour prepared with roll mill and pin mill after tempering. Korean J Postharvest Sci Technol 6(3):313-318
  20. Kim KH, Park BH, Kim DH, Cho HS. 2006. Quality characteristics of noodle supplemented with shate(Raja kenojei) skin and bone powder. J East Asian Soc Dietary Life 18(3): 353-360
  21. Kim RY, Kim CS, Kim HI. 2009. Physicochemical properties of non-waxy rice flour affected by grinding methods and steeping times. J Korean Soc Food Sci Nutr 38(8):1076-1083 https://doi.org/10.3746/jkfn.2009.38.8.1076
  22. Kim SK, Bang JB. 1996. Physicochemical properties of rice affected by steeping conditions. Korean J Food Sci Technol 28(6):1026-1032
  23. Kim SS, Kang KA, Choi SY, Lee YT. 2005. Effect of elevated steeping temperature on properties of wet-milled rice flour. J Korean Soc Food Sci Nutr 34(3):414-419 https://doi.org/10.3746/jkfn.2005.34.3.414
  24. Kim SS, Kim YJ. 1995. Effect of moisture content of paddy on properties of rice flour. Korean J Food Sci Technol 27(5): 690-696
  25. Kim WS, Shin MS. 2007. The properties of rice flours prepared by dry- and wet-milling of soaking glutinous and normal grains. Korean J Food Cookery Sci 23(6):908-918
  26. Kim YI. 1993. Physicochemical properties of wet and sry milled flours. Korean J Rural Living Sci 4(1):9-12
  27. Kum JS, Lee HY. 1999. The effect of the varieties and particle size on the properties of rice flour. Korean J Food Sci Technol 31(6):1542-1548
  28. Kum JS, Lee SH, Lee HY, Kim KH, Kim YL. 1993A. Effect of different milling methods on distribution of particle size of rice flours. Korean J Food Sci Technol 25(5):541-545
  29. Kum JS, Lee SH, Lee HY, Kim KH, Kim YL. 1993B. Effect of different milling methods on physico-chemical properties and products. Korean J Food Sci Technol 25(5):546-551
  30. Lee MK, Kim JO, Shin MS. 2004. Properties of nonwaxy rice flours with different soaking time and particle sizes. Korean J Food Sci Technol 36:268-275
  31. Lee MK, Shin MS. 2006. Characteristics of rice flours prepared by moisture-heat treatment. Korean J Food Cookery Sci 22(2):147-157
  32. Lee SH. 2002. Properties of rice flours and starches prepared by dry and wet milling of soaked rice grains. Master's Thesis. Chonnam National University, pp 15-18
  33. Lee SH, Shin MS. 2009. Characteristics of Preparation of Rice Manju and Rice Flour with Soaking and Different Particle sizes. Korean J. Food Cookery Sci 25(4):427-434
  34. Park YK, Seog HM, Nam YJ, Shin DH. 1988. Pysiocochemical properties of various milled rice flours. Korean J Food Sci Technol 20(4):504-510
  35. Shin MS, Kim JO, Lee MK. 2001. Effect of soaking time of rice and particle size of rice flours on the properties of ninwaxy rice flours soaking at room temperature. Korean J Soc Food Cookery Sci 17:309-315
  36. Song SH, Jung HS. 2009. Quality characteristics of noodle (Garakguksu) with Curcma longa L. Powder. Korean J Food Cookery Sci 25(2):199-205
  37. Wong RBK, Lelievre J. 1982. Comparision of the crystallinities of wheat starches with different swelling capacities. Starch 34 : 159 https://doi.org/10.1002/star.19820340504
  38. Yamazaki WT. 1954. Interrelationships among bread dough absorption, cookie diameter, protein content, and alkaline water retention capacity of soft winter wheat flours. Cereal Chem 31:35-41