DOI QR코드

DOI QR Code

발포용 PU/MWNT 복합필름의 제조와 특성분석

Manufacturing and Characteristics Analysis of PU/MWNT Composite Film for Forming

  • 박준형 (영남대학교 섬유패션학부) ;
  • 김정현 (영남대학교 섬유패션학부) ;
  • 김승진 (영남대학교 섬유패션학부)
  • 투고 : 2010.09.29
  • 심사 : 2010.11.18
  • 발행 : 2010.12.27

초록

This paper surveys the physical properties of the multiwall carbon nanotube (MWNT) and polyurethane composite film for improvement of mechanical properties and electrical characteristics. The modification of MWNT was carried out by acid treatment with nitric and sulphuric acid mixed solution, and then followed by thermal treatment for enhancing MWNT dispersion with polyurethane. This modified MWNT was mixed with polyurethane by changing the loading content of MWNT and dispersion time under the dimethylformamide solution in the ultrasonic wave apparatus. Various physical characteristics of the modified PU/MWNT films were measured and analyzed in terms of the loading content and dispersion time. The maximum absorbance of the PU/MWNT films were observed with the 2wt% loading at dispersion times of 2 and 24 hour, respectively. The minimum electrical volume resistivity of PU/MWNT film was shown at the loading content of 0.5wt% or more irrespective of dispersion treating time. However the optimum condition was assumed to 2wt% loading at dispersion time of 2 hours by assessing the surface profile of the film using video microscope. The breaking stress and strain of the PU/MWNT film decreased with increasing loading content, but no change of physical properties was shown with increasing in dispersion time.

키워드

참고문헌

  1. M. J. O'Connell, "Carbon Nanotube Properties and Applications", New York, U.S.A., pp.3-25, 2006.
  2. A. Chatterjee and B. L. Deopura, Carbon Nanotubes and Nanofibre: An Overview, Fibers and Polymers, 3(4), 134-139(2002). https://doi.org/10.1007/BF02912657
  3. M. Jung, and J. W. Cho, Mechanical, Thermal and Electrical Properties of Carbon Nanotube- Polyurethane Nanocomposites, Journal of Korean Fiber Society, 41(2), 73-79(2004).
  4. J. I. Lee, and H. T. Jung, Technical Status of Carbon Nanotubes Composites, Korean Chem. Eng. Res., 46(1), 7-14(2008).
  5. I. W. Chiang, B. E. Brinson, R. E. Smalley, J. L. Margrave, and R. H. Hauge, Purification and Characterization of Single-Wall Carbon Nanotubes, J. Phys. Chem. B, 105, 1157-1161(2001). https://doi.org/10.1021/jp003453z
  6. C. Park, Z. Ounaies, K. A. Watson, R. E. Crooks, J. Smith Jr., S. E. Lowther, J. W. Connell, E. J. Siochi, J. S. Harrison, and T. L. St. Clair, Dispersion of Single Wall Carbon Nanotubes by In Situ Polymerization Under Sonication, Chemical Physics Letters, 364, 303-308(2002). https://doi.org/10.1016/S0009-2614(02)01326-X
  7. K. Mukhopadhyay, C. D. Dwivedi, and G. N. Mathur, Conversion of Carbon Nanotubes to Carbon Nanofibers by Sonication, Carbon, 40, 1369-1383(2002). https://doi.org/10.1016/S0008-6223(02)00100-8
  8. P. Potschke, A. R. Bhattacharyya, and A. Janke, Melt Mixing of Polycarbonate with Multiwalled Carbon Nanotubes: Microscopic Studies on the State of Dispersion, European Polymer Journal, 40, 137-148(2004). https://doi.org/10.1016/j.eurpolymj.2003.08.008
  9. X. L. Xie, Y. W. Mai, and X. P. Zhou, Dispersion and Alignment of Carbon Nanotubes in Polymer Matrix: A review, Materials Science and Engineering, R49, 89-112(2005).
  10. E. T. Mickelson, C. B. Huffman, A. G. Rinzler, R. E. Smalley, R. H. Hauge, and J. L. Margrave, Fluorination of Single-Wall Carbon Nanotubes, Chemical Physics Letters, 296, 188-194(1998). https://doi.org/10.1016/S0009-2614(98)01026-4
  11. A. Hirsch, Functionalization of Single-Walled Carbon Nanotubes, Chem. Int. Ed., 41, 1853-1859(2002). https://doi.org/10.1002/1521-3773(20020603)41:11<1853::AID-ANIE1853>3.0.CO;2-N
  12. M. Olek, M. Hilgendorff, and M. Giersig, A Simple Route for the Attachment of Colloidal Nanocrystals to Noncovalently Modified Multiwalled Carbon Nanotubes, Colloid and Surfaces A: Physicochem. Eng. Aspects, 292, 83-85(2007). https://doi.org/10.1016/j.colsurfa.2006.05.014
  13. H. Kitano, K. Tachimoto, and Y. Anraku, Functionalization of Single-Walled Carbon Nanotube by Covalent Modification with Polymer Chains, Journal of Colloid and Interface Science, 306, 28-33(2007). https://doi.org/10.1016/j.jcis.2006.10.034
  14. A. G. Osorio, I. C. L. Silveira, V. L. Bueno, and C. P. Bergmann, $H_{2}SO_{4}/HNO_{3}/HCI-Functionalization$ and Its Effect on Dispersion of Carbon Nanotubes in Aqueous Media, Applied Surface Science, 255, 2485-2489(2008). https://doi.org/10.1016/j.apsusc.2008.07.144
  15. L. S. Schadler, S. C. Giannaris, and P. M. Ajayan, Load Transfer in Carbon Nanotube Epoxy Composites, Applied Physics Letters, 73, 3842-3844(1998). https://doi.org/10.1063/1.122911
  16. Z. Jin, K. P. Pramoda, S. H. Goh, and G. Xu, Poly(vinylidene fluoride)-Assisted Melt-Blending of Multi-Walled Carbon Nanotube/Poly(methylmethacrylate) Composites, Materials Research Bulletin, 37, 271-278(2002). https://doi.org/10.1016/S0025-5408(01)00775-9
  17. D. Xu and Z. Wang, Role of Multi-Wall Carbon Nanotube Network in Composites to Crystallization of Isotactic Polypropylene Matrix, Polymer, 49, 330-338(2008). https://doi.org/10.1016/j.polymer.2007.11.041
  18. K. Jurewicz, S. Delpeux, V. Bertagna, F. Beguin, and E. Frackowiak, Sopercapacitors from Nanotubes/ Polypyrrole Composites, Chemical Physics Letters, 347, 36-40(2001). https://doi.org/10.1016/S0009-2614(01)01037-5
  19. N. G. Sahoo, Y. C. Jung, H. J. Yoo, and J. W. Cho, Influence of Carbon Nanotubes and Polypyrrole on the Thermal, Mechanical and Electroactive Shape-Memory Properties of Polyurethane Nanocomposites, Composite Science and Technology, 67, 1920-1929(2007). https://doi.org/10.1016/j.compscitech.2006.10.013
  20. E. Kymakis, I. Alexandou, and G. A. J. Amaratunga, Single-Walled Carbon Nanotube- Polymer Composites: Electrical, Optical and Structural Investigation, Synthetic Metals, 127, 59-62(2002). https://doi.org/10.1016/S0379-6779(01)00592-6
  21. A. Ilcham, A. Srisurichan, A. Soottitantawat, and T. Charinpanitkul, Dispersion of Multi- Walled Carbon Nanotubes in Poly(p-phenylene) thin Films and Their Electrical Characteristics, Particuology, 7, 403-407(2009). https://doi.org/10.1016/j.partic.2009.03.006
  22. Y. M. Tsai, T. L. Yu, and Y. H. Tseng, Physical Properties of Crosslinked Polyurethane, Polymer International, 47, 445-450(1998). https://doi.org/10.1002/(SICI)1097-0126(199812)47:4<445::AID-PI82>3.0.CO;2-B
  23. S. Y. Lee, Y. C. Jung, J. W. Cho, and B. C. Chun, Synthesis and Characteristics of Carbon Nanotube Nanocomposites Crosslinked with Polyurethane, Textile Science and Engineering, 45(4), 247-253(2008).
  24. H. G. Im, H. M. Kim, and J. H. Kim, Dispersity of CNT and GNF on Polyurethane Matrix: Effect of Polyurethane Chemical Structure, Polymer(Korea), 32(4), 340-346(2008).
  25. J. W. Kim, Y. C. Jung, and J. W. Cho, Carbon Nanotube-Polyurethane Nanocomposites Having Characteristics of Electroactive Shape Recovery, Textile Science and Engineering, 42(4), 270-276(2005).
  26. K. S. Park, S. J. Kim, J. H. Kim, J. H. Park, and O. K. Kwon, Modification of Carbon Nanotube for the Improvement of Dispersion Property and Dispersion Characteristics of Carbon Nanotube Polyurethane, Textile Coloration and Finishing, 22(1), 43-50(2010). https://doi.org/10.5764/TCF.2010.22.1.043
  27. J. H. Kim, J. H. Park and S. J. Kim, The Physical Property of the MWNT/PU Composite Films, Textile Coloration and Finishing, 22(3), 246-256(2010). https://doi.org/10.5764/TCF.2010.22.3.246
  28. G. Y. Park, J. S. Kim and Y. J. Jeong, Comparison of Characteristic of Multi-walled Carbon Nanotubes Functionalized Using Various Methods, Textile Science and Engineering, 45, 359-362(2008).
  29. J. M. Park, D. S. Kim, S. J. Kim, P. G. Kim, D. J. Yoon, and K. L. Devries, Inherent Sensing and Interfacial Evaluation of Carbon Nanofiber and Nanotube/Epoxy Composites Using Electrical Resistance Measurement and Micromechanical Technique, Composites: Part B, 38, 847-861 (2007). https://doi.org/10.1016/j.compositesb.2006.12.004
  30. J. H. Ko, J. C. Kim, and J. H. Chang, Ultrahigh Molecular Weight Polyethylene Hybrid Films with Functionalized-MWNT : Thermomechanical Properties, Morphology, Gas Permeability, and Optical Transparency, Polymer(Korea), 33(2), 97-103(2009).
  31. P. C. Ma, B. Z. Tang, and J. K. Kim, Effect of CNT Decoration with Silver Nanoparticles on Electrical Conductivity of CNT-Polymer Composites, Carbon, 46, 1497-1505(2008). https://doi.org/10.1016/j.carbon.2008.06.048
  32. J. H. Kook, K. U. Jeong, J. S. Yang, D. H. Park, J. H. Go, and C. W. Nah, Preparation and Physical Properties of Poly(ethylene-co-ethyl acrylate)/Carbon Nanotube Nanocomposites, J. Korean Ind. Eng. Chem., 19(2), 161-167(2008).
  33. Y. H. Lee, The Physical Property and Application of Carbon Nanotube, Sea Mulli(The Korean Physical Society), 51(2), 84-144(2005).

피인용 문헌

  1. Analysis of Electrical and Physical Property of the PU/MWNT Film and Dispersion Characteristics of MWNT According to the Solvent vol.24, pp.1, 2012, https://doi.org/10.5764/TCF.2012.24.1.69
  2. The Characteristic of PU/MWNT Foaming Film vol.24, pp.1, 2012, https://doi.org/10.5764/TCF.2012.24.1.7
  3. Analysis on ESD Properties of the PANI added PU/MWNT Films vol.25, pp.1, 2013, https://doi.org/10.5764/TCF.2013.25.1.37