초록
CIIR에 BR, SBR 및 NBR을 다양한 조성으로 혼합하여 블렌드물의 마찰계수와 내마모특성 및 물리적 특성 변화 등을 검토하였다. 영구압축줄음율 측정에서 블렌드비율 25%에서 가장 높은 값을 나타내어 변형에 대한 저항 특성이 가장 낮은 것으로 나타났다. SBR, NBR, BR이 CIIR에 블렌딩됨에 따라 블렌드물의 마찰계수는 산술평균적으로 저하하는 경향을 나타내었다. 마찰력 향상을 위하여 BR에 CIIR을 블렌딩하는 경우 마찰계수 증가에 의한 접지력 향상보다는 내마모 성능 저하에 의한 마이너스효과가 더욱 큰 것으로 나타났다.
The CIIR blends with SBR, NBR and BR were prepared with various mixing ratios. The mechanical and physical properties of these blends, such as frictional coefficient, abrasion resistance, compression set, and specific gravity, were measured. In the permanent compression set measurement, the blends at the composition of 75 wt% CIIR showed the highest value, which means the lowest resistance to deformation. As SBR, NBR and BR blends with CIIR, the coefficient of friction of the mixtures showed a tendency to decrease in arithmetic average. In the case of blending CIIR with BR in order to increase the friction force, the negative effect due to reduction in abrasion resistance was greater than the positive effect of the improvement of the traction force caused by increasing friction coefficient.