DOI QR코드

DOI QR Code

Kinematic Skill Analysis of the Turn Motion and Release Phase in Female Hammer Throw

여자해머던지기 턴 동작과 투사국면에 대한 운동학적 기술 요인 분석

  • Chung, Nam-Ju (Division of Sport Science, College of Environmental Science and Engineering, Honam University) ;
  • Kim, Jae-Pil (Department of Sport and Leisure Science, College of Humanities and Arts, Sunchon National University) ;
  • Song, Ok-Heung (Department of Physical Education, Graduate School Education, Sunchon National University)
  • 정남주 (호남대학교 환경이공대학 스포츠레저학과) ;
  • 김재필 (순천대학교 인문예술대학 사회체육학과) ;
  • 송옥흥 (순천대학교 인문예술대학 사회체육학과)
  • Received : 2010.10.31
  • Accepted : 2010.12.26
  • Published : 2010.12.31

Abstract

The purpose of this study was to analyze the kinematic factors and throwing variables for the 3-turn and 4-turn techniques and for release as well as to provide technical advice for improving athletic performance in hammer throwing. Data analysis led to the following conclusions: To increase the rotation speed for the 3-turn and 4-turn techniques, the time elapsed during the 1-foot support period should be decreased the distance between the rotating foot and the rotation axis should be small and the height of the hip joint should be increased at the times of release The throwing angle at the moment of release should be more than 40 degrees, and the throwing position should be taken vertically high at the shoulder joints. To accelerate the motion of the hammer, the speed should not be reduced during the 1-foot support period but should be increased during the 2-foot support period for much greater acceleration. In the 3-turn technique, the angles of the shoulder axis and hummer string should be dragged angle at the maximum point and lead angle at the minimum point, and dragged angle at the maximum and minimum points in the 4-turn at the time of relase The upper body should be quickly bent backward, the knee angle should be extended, and the angles of the shoulder axis and hammer string should be dragged angle close to 90 degrees.

Keywords

References

  1. 강나루(2008). 여자 해머던지기 턴 동작에 따른 운동학적 차이. 미간행 석사학위논문. 한국체육대학교 교육대학원.
  2. 남상남, 최창국, 남청웅, 김일곤, 안정훈(2003). 육상경기 아카데미. 서울 : 대경북스.
  3. 박준기(1994). 육상경기-이론과 실제. 서울 : 도서출판 금광.
  4. 이정훈(1984). 해머던지기에 있어서 구의 크기가 기록에 미치는 영향. 미간행 석사학위논문. 충남대학교 교육대학원.
  5. 이윤철(2007). 해머던지기 턴 동작과 릴리즈 국면의 운동학적 분석. 미간행 석사학위논문. 한국체육대학교 교육대학원.
  6. 최대우, 이왕복(1986). 해머 길이 변화가 기록에 미치는 영향. 충남대학교체육과학연구소논집, 4(1), 136-139.
  7. Abdel-Aziz, Y. I., & Karara, H. M.(1971). Direct linear transformation : From comparator coordinates into object coordinate in close-range photogrammetry. Proceedings of ASPUI Symposium on close-range photogrammetry, Urbana, UA : American Society of Photogrammetry, 1-19.
  8. Bartonietz, K., Barclay, L., & Gathercole, D.(1997). Characteristics of top Performances in the women's hammer throw: Basics and technique of the world's best athletes. IAAF 12:2-3, 101-109.
  9. Dapena, J.(1984). The pattern of hammer speed during a hammer throw and influence of gravity on it's fluctuation. Journal of Biomechanics, 17, 553-559. https://doi.org/10.1016/0021-9290(84)90086-1
  10. Dapena, J.(1986). A kinematic study of center of mass motion in the hammer. Journal of Biomechanics, 19, 147-158. https://doi.org/10.1016/0021-9290(86)90144-2
  11. Dapena, J., & Feltner, M.E.(1989). Influence of the direction of the cable force and of the radius of the hammer path on speed fluctuation during hammer throwing. Journal of Biomechanics, 22, 565-575. https://doi.org/10.1016/0021-9290(89)90008-0
  12. Dapena, J., Gutierrez-davila, M., Soto, V. M., & Rojas, F. J. (2003). predication of distance in hammer throwing. Journal of Sports Science, 21, 21-28. https://doi.org/10.1080/0264041031000070921
  13. Dapena, J., & Mcdonald, c.(1989). A three-dimensional analysis of angular momentum in the hammer throw. Medicine and Science in Sports and Excercise, 21, 206-220.
  14. Dapena, J., & Teves, M.(1989). Influence of the diameter of the hammer head on the distance of a hammer throw. Research Quarterly for Exercise and Sport, 53, 78-91.
  15. Gutierrez, M., Soto, V. M., & Rojas, E. J.(2002). A biomechanical analysis of the individual technique of the hammer throw finalists in the Seville Athletics World Championship 1999. IAAF, 17(2), 15-26.
  16. Jaede, E.(1991). The Main Elements of Modern Hammer Throwing Technique. Modern Athlete and Coach, 27, 16-19.
  17. Judge, L.(1999). Are There Any Differences? Teaching The Women's Hammer. TRACK COACH, 148, 4713-4719.
  18. Judge, L.(2000) A technique analysis of the hammer throw for men & women. Track & Field, 2, 36-39.
  19. Kwon, Y. H.(2003). Know3 Film Motion Analysis Package. User's Reference Manual. Unpublished program manual. http://www.KWON3D.com.
  20. Maro'nski, R.(1991). Optimal distance from the impement to the axis of rotation in hammer and discus throws. Journal of Biomechanics, 24(11), 999-1005. https://doi.org/10.1016/0021-9290(91)90017-H
  21. Mizera, F., & Horva'ath G.(2002). Influence of environmental factors on shot put and hammer throw range. Journal of Biomechanics, 35(6), 785-96. https://doi.org/10.1016/S0021-9290(02)00029-5
  22. Murofushi, S., Saito, M., & Yuasa, M.(1982). Biomechanical analysis of hammer throw: The speed, height and angle of release and phase analysis. Research Journal of physical education Chunkyo University, 23, 38-43.
  23. Murofushi, K., Sakurai, S., Umegaki, K., & Kobayashi, K.(2005).Development of a System to Measure Radius of Curvature and Speed of Hammer Head during Turns in Hammer Throw. International Journal of Sport and Health Science, 3, 116-128. https://doi.org/10.5432/ijshs.3.116
  24. Otto, R.(1992). NSA Photosequence 22-Hammer Throw: Yuriy Sesykh 86.74w, Commentary. In: New Studies in Athletic, 7(3), 51-65.
  25. Stone, M. H., Sanborn, K., O'Bryant, H. S., Hartman, M., Stone,M. E., Proulx, C., Ward, B., & Hruby, J.(2003). Maximum strength-power-performance relationship in collegiate throwers. Journal of Strength and Conditioning Research, 17(4), 739-745.
  26. Towned, M. S.(1984). Mathematics in sport. Horwood, Chichester,38-44.