Journal of Surface Science and Engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

Pulse Electrodeposition and Characterization of Ni-Si3N4 Composite Coatings

  • Gyawali, Gobinda (Department of Metallurgy and Materials Engineering, Sun Moon University) ;
  • Woo, Dong-Jin (Korea Institute of Construction Materials) ;
  • Lee, Soo-Wohn (Department of Environmental Engineering, Sun Moon University)
  • Received : 2010.10.20
  • Accepted : 2010.10.30
  • Published : 2010.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

$Ni-Si_3N_4$ nano-composite coatings were prepared by pulse current (PC) electrodeposition and direct current (DC) electrodeposition techniques. The micro-structure of the coatings was characterized by scanning electron microscopy (SEM), vickers microhardness, X-Ray Diffraction (XRD) and wear-friction tests. The results showed that the micro-structure and wear performance of the coatings were affected by the electrodeposition techniques. Pulse current electrodeposited $Ni-Si_3N_4$ composite coatings exhibited higher microhardness, smooth surface, and better wear resistance properties as compared to coatings prepared under DC condition. The $Ni-Si_3N_4$ composite coatings prepared at 50 Hz pulse frequency with 10% duty cycles has shown higher codeposition of nano-particles. Consequently, increased microhardness and less plastic deformations occurred in coatings during sliding wear test. The XRD patterns revealed that the increased pulse frequencies changed the preferred (100) nickel crystallite orientations into mixed (111) and (100) orientations.

Keywords

References

  1. J. Fransaer, J. P. Celis, J. R. ROGs, Met. Finish., 91 (1993) 97.
  2. M. Musiani, Electrochim. Acta, 45 (2000) 3397. https://doi.org/10.1016/S0013-4686(00)00438-2
  3. M. Srivastava, V. K. W. Grips, A. Jain, K. S. Rajam, Surf. Coat. Technol., 202 (2007) 310. https://doi.org/10.1016/j.surfcoat.2007.05.078
  4. L. M. Chang, M. Z. An, H. F. Guo, S. Y Shi, App. Surf. Sci., 253 (2006) 2132. https://doi.org/10.1016/j.apsusc.2006.04.018
  5. W. Wang, F. Y Hou, H. Wang, H. T. Guo, Scripta Mater., 53 (2005) 613. https://doi.org/10.1016/j.scriptamat.2005.04.002
  6. P. Gyftou, E. A. Pavlatou, N. Spyrellis, App. Surf. Sci., 254 (2008) 5910. https://doi.org/10.1016/j.apsusc.2008.03.151
  7. L. M. Chang, H. F. Guo, M. Z. An, Mater. Lett., 62 (2008) 3313. https://doi.org/10.1016/j.matlet.2008.02.055
  8. N. S. Qu, K. C. Chan, D. Zhu, Scripta Mater., 50 (2004) 1131. https://doi.org/10.1016/j.scriptamat.2004.01.027
  9. L. Shi, C. Sun, P. Gao, F. Zhou, W. Liu, App. Surf. Sci., 252 (2006) 3591. https://doi.org/10.1016/j.apsusc.2005.05.035
  10. D. Thiemig, A. Bund, Surf. Coat. Technol., 202 (2008) 2976. https://doi.org/10.1016/j.surfcoat.2007.10.035
  11. M. R. Vaezi, S. K. Sadrnezhaad, L. Nikzad, Colloid Surf. A, 315 (2008) 176. https://doi.org/10.1016/j.colsurfa.2007.07.027
  12. F. Erler, C. Jakob, H. Romanus, L. Spiess, B. Wielage, T. Lampke, S. Steinhauser, Electrochim. Acta, 48 (2003) 3063. https://doi.org/10.1016/S0013-4686(03)00380-3
  13. J. Li, Y Sun, X. Sun, J. Qiao, Surf. Coat. Technol., 192 (2005) 331. https://doi.org/10.1016/j.surfcoat.2004.04.082
  14. A. Abdel Aal, Mater. Sci. Eng. A, 474 (2008) 181. https://doi.org/10.1016/j.msea.2007.04.058
  15. S. H. Yeh, C. C. Wan, J. Appl. Electrochem., 24 (1994) 993.

Cited by

  1. Mechanical and Tribological Properties of Pulse and Direct Current Electrodeposited Ni-TiO2Nano Composite Coatings vol.43, pp.6, 2010, https://doi.org/10.5695/JKISE.2010.43.6.283