참고문헌
- H. F. Lopez and W. Phoomiphakdeephan, “High Temperature Oxidation of Nitride Bonded SiC-Ceramics,” Mater. Lett., 36 65-9 (1998).
- A. Kumar Gain, J. K. Han, H. D. Jang, and B. T. Lee, “Fabrication of Continuously Porous SiC-Si3N4 Composite Using SiC Powder by Extrusion Process,” J. Europ. Ceram. Soc., 26 2467-73 (2006). https://doi.org/10.1016/j.jeurceramsoc.2005.06.038
- N. K. Reddy and J. Mukerji, “Silicon Nitride-Silicon Carbide Refractories Produced by Reaction Bonding,” J. Am. Ceram. Soc., 74 [5] 1139-41 (1991). https://doi.org/10.1111/j.1151-2916.1991.tb04356.x
- D. P. Edwards, B. C. Muddle, Y.-B. Cheng, and R. H. J. Hannink, “The Development of Microstructure in Silicon Nitride-Bonded Silicon Carbide,” J. Europ. Ceram. Soc., 15 415-24 (1995). https://doi.org/10.1016/0955-2219(95)00008-I
- Z. Z. Yi, Z. P. Xie, J. T. Ma, Y. Huang, and Y.-B. Cheng, “Study on Gelcasting of Silicon Nitride-Bonded Silicon Carbide Refractories,” Mater. Lett., 56 895-900 (2002). https://doi.org/10.1016/S0167-577X(02)00633-X
- M. J. Choi, T. W. Roh, C. Park, D. S. Park, and H. D. Kim, “The Study of Reaction Bonded Silicon Nitride Fabricated Under Static Nitrogen Pressure(in Korean),” J. Kor. Ceram. Soc., 37 [5] 505-10 (2000).
- J. S. Lee, J. H. Mun, B. D. Han, D. S. Park, and H. D. Kim, “Effect of Raw-Si Particle Size on the Mechanical Properties of Sintered RBSN(in Korean),” J. Kor. Ceram. Soc., 38 [8] 740-48 (2001).
- Y. J. Park, E. A. Noh, J. W. Ko, and H. D. Kim, “Fabrication of β-SiAlONs by a Reaction-Bonding Process Followed by Post-Sintering,” J. Kor. Ceram. Soc., 46 [5] 452-55 (2009). https://doi.org/10.4191/KCERS.2009.46.5.452
-
K. H. Kwak, C. Kim, I. S. Han, and K. S. Lee, “Thermal
Shock and Hot Corrosion Resistance of
Si_3N_4$ Fabricated by Nitrided Pressureless Sintering(in Korean),” J. Kor. Ceram. Soc., 46 [5] 478-83 (2009). https://doi.org/10.4191/KCERS.2009.46.5.478 - Y. J. Park, H. W. Lim, E. Choi, and H. D. Kim, “The Effect of Processing Variables and Composition on the Nitridation Behavior of Silicon Powder Compact,” J. Kor. Ceram. Soc., 43 [8] 472-78 (2006). https://doi.org/10.4191/KCERS.2006.43.8.472
- Z. P. Xie, Y.-B. Cheng, and Y. Huang, “Formation of Silicon Nitride Bonded Silicon Carbide by Aqueous Gelcasting,” Mater. Sci. Eng. A, 349 20-8 (2003). https://doi.org/10.1016/S0921-5093(02)00470-7
-
J. F. Li, S. Satomi, R. Watanabe, M. Omori, and T. Hirai, “Fabrication and Characterization of SiC Rod-Particulate-Reinforced Reaction-Bonded
Si_3N_4$ Composite,” J. Europ. Ceram. Soc., 20 1795-802 (2000). https://doi.org/10.1016/S0955-2219(00)00045-5 - M. Kishan Reddy and J. Mukerji, “Preparation and Characterization of Silicon Nitride-Silicon Carbide Composites,” Bull. Mater. Sci., 13 [3] 173-78 (1990). https://doi.org/10.1007/BF02744943
- T. Kosmac and R. Janssen, “Low Pressure Injection Moulding of SiC Platelet Reinforced Reaction Bonded Silicon Nitride,” J. Mater. Sci., 32 469-74 (1997). https://doi.org/10.1023/A:1018530122556
- J. L. Huang, S. W. Chen, H. H. Lu, and W. H. Chan, “Role of Pore Structure in the Nitridation of Silicon/Silicon Nitride Compacts,” Ceram. Int., 22 27-31 (1996). https://doi.org/10.1016/0272-8842(95)00049-6
- A. Atkinson and A. J. Moulson, “Some Important Variables Affecting the Course of Reaction Between Silicon Powder and Nitrogen” pp. 111-21, The 8th International Conference on Science of Ceramics, edited by G. H. Stewart, Cambridge, UK, 1976.
- J. Heinrich and G. Streb, “Quantitative Microstructural Analysis of Reaction-Bonded Silicon Nitride,” J. Mater. Sci., 14 2083-90 (1979). https://doi.org/10.1007/BF00688412
- H. M. Jennings, S. C. Danforth, and M. H. Richman, “Microstructural Analysis of Reaction-Bonded Silicon Nitride,” Metallography, 9 427-46 (1976). https://doi.org/10.1016/0026-0800(76)90005-7
- R. G. Stephen and F. L. Riley, “Oxidation of Silicon by Water,” J. Europ. Ceram. Soc., 5 219-22 (1989). https://doi.org/10.1016/S0955-2219(89)80003-2
- K. Y. Lim, Y.-W. Kim, S. K. Woo, and I. S. Han, “Effect of Aluminum Addition on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide Ceramics (in Korean),” J. Kor. Ceram. Soc., 46 [5] 520-24 (2009). https://doi.org/10.4191/KCERS.2009.46.5.520
- Y.-W. Kim, H. D. Kim, and C. B. Park, “Processing of Microcellular Mullite,” J. Am. Ceram. Soc., 88 [12] 3311-15 (2005). https://doi.org/10.1111/j.1551-2916.2005.00597.x
- D. H. Jang, Y.-W. Kim, I. H. Song, and H. D. Kim, “Processing of Cellular Glasses Using Glass Microspheres,” J. Am. Ceram. Soc., 89 [10] 3262-65 (2006). https://doi.org/10.1111/j.1551-2916.2006.01196.x
- J. H. Eom, Y.-W. Kim, I. H. Song, and H. D. Kim, “Microstructure and Properties of Porous Silicon Carbide Ceramics Fabricated by Carbothermal Reduction and Subsequent Sintering Process,” Mater. Sci. Eng. A, 464 129-34 (2007). https://doi.org/10.1016/j.msea.2007.03.076
- J. H. Eom, Y.-W. Kim, I. H. Song, and H. D. Kim, “Processing and Properties of Polysiloxane-Derived Porous Silicon Carbide Ceramics Using Hollow Microspheres as Templates,” J. Europ. Ceram. Soc., 28 1029-35 (2008). https://doi.org/10.1016/j.jeurceramsoc.2007.09.009
- S. H. Chae, Y.-W. Kim, I. H. Song, H. D. Kim, and M. Narisawa, “Porosity Control of Porous Silicon Carbide Ceramics,” J. Europ. Ceram. Soc., 29 2867-72 (2009). https://doi.org/10.1016/j.jeurceramsoc.2009.03.027
- J. H. Eom and Y.-W. Kim, “Effect of Additive Composition on Microstructure and Strength of Porous Silicon Carbide Ceramics,” J. Mater. Sci., 44 4482-86 (2009). https://doi.org/10.1007/s10853-009-3638-x
- J. H. Eom and Y.-W. Kim, “Effect of Template Size on Microstructure and Strength of Porous Silicon Carbide Ceramics,” J. Ceram. Soc. Japan, 116 [10] 1159-63 (2008). https://doi.org/10.2109/jcersj2.116.1159
피인용 문헌
- Flexural Strength of Macroporous Silicon Carbide Ceramics vol.48, pp.5, 2011, https://doi.org/10.4191/kcers.2011.48.5.360
- Sintered-reaction Bonded Silicon Nitride Densified by a Gas Pressure Sintering Process - Effects of Rare Earth Oxide Sintering Additives vol.49, pp.4, 2012, https://doi.org/10.4191/kcers.2012.49.4.318
- Effect of SiC Filler Content on Microstructure and Flexural Strength of Highly Porous SiC Ceramics Fabricated from Carbon-Filled Polysiloxane vol.49, pp.6, 2012, https://doi.org/10.4191/kcers.2012.49.6.625
- Processing of alumina-coated glass-bonded silicon carbide membranes for oily wastewater treatment vol.14, pp.4, 2017, https://doi.org/10.1111/ijac.12693