DOI QR코드

DOI QR Code

암반에 근입된 현장타설말뚝 시공시 선단부 강도확인을 위한 정적암반관입기 개발연구

Development of Static Rock Penetrometer for Locating Rock Stratum During Construction of Drilled Shafts

  • 남문석 (한국도로공사 도로교통연구원)
  • Nam, Moon-S. (Expressway & Transportation Research Institute, Korea Expressway Corp.)
  • 투고 : 2010.07.02
  • 심사 : 2010.08.30
  • 발행 : 2010.09.30

초록

암반에 근입된 현장타설말뚝 시공 시, 말뚝 선단부의 위치 및 강도는 반드시 확인되어야 한다. 그러나, 실제 현장타설말뚝의 시공 시 굴착액 등으로 인하여 선단부의 위치 및 강도 확인이 힘든 실정이다. 따라서, 본 연구에서는 현장타설말뚝 굴착장비에 간단히 부착하여 선단부 암반의 위치 및 강도를 측정할 수 있는 정적관입기를 개발하였다. 일련의 실내교정을 통하여 만들어진 정적암반관입기는 여러 현장에서 수행된 검증시험을 성공적으로 수행하였고, 이에 따라서 현장타설말뚝 선단부의 위치 및 강도 확인을 가능하게 하였다.

During construction of deep foundation in soft rock under varying soil properties, it is essential to locate the rock stratum, especially when drilling with slurry. When slurry is used for drilling, the bottom of the borehole cannot be seen, thereafter soil cuttings cannot be differentiated from soft rock cuttings. A new static rock penetrometer, known as Rock Penetrometer was developed during this study. It could be a simple mechanical device that is attached to the bottom of a Kelly bar which is used to attach drilling tools such as augers and core barrels while drilling. After its calibration in the laboratory, the performance of the static rock penetrometer was verified in the several field test sites.

키워드

참고문헌

  1. Likins, G., Beim, G., Morgano, M., Piscsalko, G., and Goble, G. (2000), "Construction Control for Augercast Piling", Proceeding of Geo-Denver Conference, ASCE, Denver, Colorado, pp.447-457.
  2. Nam, M. S. (2004), "Improved Design for Drilled Shafts in Rock", Ph. D. Dissertation, Department of Civil & Environmental Engineering, University of Houston, Houston, Texas.