DOI QR코드

DOI QR Code

Electroless Nickel Plating on Fibers for the Highly Porous Electrode

  • Cheon, So-Young (Dept. of Materials Science and Engineering, Hongik University) ;
  • Park, So-Yeon (Dept. of Materials Science and Engineering, Hongik University) ;
  • Rhym, Young-Mok (Div. of Indus. Tech. Support, Korea Institute of Materials Science) ;
  • Kim, Doo-Hyun (Div. of Indus. Tech. Support, Korea Institute of Materials Science) ;
  • Koo, Yeon-Soo (Dept. of Manufacture and Metallurgical Engineering, Gwangyang Health College) ;
  • Lee, Jae-Ho (Dept. of Materials Science and Engineering, Hongik University)
  • 투고 : 2010.12.15
  • 심사 : 2010.12.29
  • 발행 : 2010.12.30

초록

Materials used as fuel cell electrode should be light, high conductive, high surface area for reaction, catalytic surface and uniformity of porous structure. Nickel is widely used in electrode materials because it itself has catalytic properties. When used as electrode materials, nickel of only a few im on the surface may be sufficient to conduct the catalytic role. To manufacture the nickel with porous structure, Electroless nickel plating on carbon fiber be conducted. Because electroless nickel plating is possible to do uniform coating on the surface of substrate with complex shape. Acidic bath and alkaline bathe were used in electroless nickel plating bath, and pH and temperature of bath were controlled. The rate of electroless plating in alkaline bath was faster than that in acidic bath. As increasing pH and temperature, the rate of electrolee plating was increased. The content of phosphorous in nickel deposit was higher in acidic bath than that in alkaline bath. As a result, the uniform nickel deposit on porous carbon fiber was conducted.

키워드

참고문헌

  1. J. Larminie and A. Dicks, Fuel Cell Systems Explained 2nd, Willey 187-201 (2003).
  2. M.S. Wilson J.A. Valerio and S. Gottesfeld, Electro Chim Acta, 40(3), 355-363 (1995). https://doi.org/10.1016/0013-4686(94)00272-3
  3. X. Zhang and Z. Shen, Fuel. 81(17), 2199-2201 (2002). https://doi.org/10.1016/S0016-2361(02)00166-7
  4. L. Zhou, H. Lin, B. Yi and H. Zhang, Chemical Engineering Journal, 125(3), 187-192 (2007). https://doi.org/10.1016/j.cej.2006.10.013
  5. K.K. Kar and D. Sathiyamoorthy, J. of Materials Processing Technology, 209(6), 3022-3029 (2009). https://doi.org/10.1016/j.jmatprotec.2008.07.006
  6. I. Baskaran, T.S.N. Sankara Narayanan and A. Stephen, Materials Chemistry & Physics, 99(1), 117-126 (2006). https://doi.org/10.1016/j.matchemphys.2005.10.001
  7. M. Palaniappa, G. Veera Babu and K. Balasubramanian, Materials Science & Engineering A, 471(1-2), 165-168 (2007). https://doi.org/10.1016/j.msea.2007.03.004
  8. H. Zhao, Z. Huang and J. Cui, Surface & Coatings Tech., 202(1), 133-139 (2007). https://doi.org/10.1016/j.surfcoat.2007.05.001
  9. H. Lee and Surface Engineering, Hyungseul Publishing, Korea 147-148 (1999).
  10. G.O. Mallory and J.B. Hajdu, Electroless Plating : Fundamentals And Applications, AESF 1-12 (1990).

피인용 문헌

  1. High-performance Fuel Cell with Stretched Catalyst-Coated Membrane: One-step Formation of Cracked Electrode vol.6, pp.1, 2016, https://doi.org/10.1038/srep26503
  2. Investigation of the Kinetics and Mass Transport Aspects of Hydrogen Evolution during Electroless Deposition of Nickel–Phosphorus vol.164, pp.7, 2017, https://doi.org/10.1149/2.1521707jes
  3. Porous nickel films plated in supercritical carbon dioxide emulsified electrolyte using a series of fluorinated nonionic surfactants vol.259, 2014, https://doi.org/10.1016/j.surfcoat.2014.02.061