압전소자와 충격구동 메커니즘을 이용한 초정밀 회전장치

A Precision Rotational Device using Piezoelectric Elements and Impact Drive Mechanism

  • 텐 알렉시 데손 (울산대학교 대학원 기계자동차공학과) ;
  • 유봉곤 (울산대학교 대학원 기계자동차공학과) ;
  • 전종업 (울산대학교 기계자동차공학부)
  • Ten, Aleksey-Deson (Department of Mechanical and Automotive Engineering, Graduate School, Univ. of Ulsan) ;
  • Ryu, Bong-Gon (Department of Mechanical and Automotive Engineering, Graduate School, Univ. of Ulsan) ;
  • Jeon, Jong-Up (School of Mechanical and Automotive Engineering, Univ. of Ulsan)
  • 발행 : 2010.01.01

초록

This paper describes the design, construction, and fundamental testing of a precision rotational device that utilizes piezoelectric elements as a source of driving force and impact drive mechanism as a driving principle. A novel device structure is designed and the numerical simulations about the static displacement, stress distribution, and mode shape of the designed structure are performed. A fabricated rotational device has been rotated successfully by applying saw-shaped voltages to the piezoelectric elements. The one-step rotational angle was $0.44{\times}10^{-3}$ rad at the applied voltages of 80V. The angular velocities of the device were revealed to be increased as the driving frequency and voltage were respectively increased and the preload was decreased. The device has a feature that it can be translated as well as rotated. An experimental result shows that the device was translated by ${\pm}4.56{\mu}m$ maximum when the 120V sinusoidal voltages with a phase difference of $180^{\circ}$ were respectively supplied to two piezoelectric elements.

키워드

참고문헌

  1. Choi, H.-S., Lee, J., Jung, M. C., Yun, D. W., Han, C.-S., Hong, W. P., Kang, E. G. and Choi, H. J., "Review of a High Precision Actuator Mechanism Using PZT," Proc. Korean Society of Machine Tool Engineers Spring Conf., pp. 524-529, 2004.
  2. Lee, S. and Jeon, J. U., "A Study on Ultra Precision Rotational Device Using Smooth Impact Drive Mechanism," Journal of the Korean Society for Precision Engineering, Vol. 25, No. 4, pp. 140-147, 2008.
  3. Higuchi, T., Yamagata, Y., Furutani, K. and Kudoh, K., "Precise Positioning Mechanism Utilizing Rapid Deformations of Piezoelectric Elements," Proc. IEEE Workshop on MEMS, pp. 222-226, 1990.
  4. Yoshida, R., Okamoto, Y. and Okada, H., "Development of Smooth Impact Drive Mechanism (2nd Report)," Journal of the Japan Society of Precision Engineering, Vol. 68, No. 4, pp. 536-541, 2002. https://doi.org/10.2493/jjspe.68.536
  5. Yoshida, R., Okamoto, Y., Hamamatsu, A. and Higuchi, T., "Development of Translation Stage Using Smooth Impact Drive Mechanism," 1998 Japan U.S.A. Symp. on Flexible Automation, pp. 61-67, 1998.