변형률 속도 효과를 고려한 355 nm UV 레이저 구리재질의 싱글 펄스 전산해석

Computational Analysis of 355 nm UV Laser Single-Pulsed Machining of Copper Material Considering the Strain Rate Effect

  • 이정한 (부산대학교 기계공학부 정밀가공시스템) ;
  • 오재용 (부산대학교 ERC/NSDM) ;
  • 박상후 (부산대학교 기계공학부 정밀가공시스템) ;
  • 신보성 (부산대학교 ERC/NSDM)
  • 투고 : 2010.04.08
  • 심사 : 2010.06.10
  • 발행 : 2010.06.30

초록

Recently, UV pulse laser is widely used in micro machining of the research, development and industry field of IT, NT and BT products because the laser short wavelength provides not only micro drilling, micro cutting and micro grooving which has a very fine line width, but also high absorption coefficient which allows a lot of type of materials to be machined more easily. To analyze the dynamic deformation during a very short processing time, which is nearly about several tens nanoseconds, the commercial Finite Element Analysis (FEA) code, LS-DYNA 3D, was employed for the computitional simulation of the UV laser micro machining behavior for thin copper material in this paper. A finite element model considering high strain rate effect is especially suggested to investigate the micro phenomena which are only dominated by mechanically pressure impact in disregard of thermally heat transfer. From these computational results, some of dynamic deformation behaviors such as dent deformation shapes, strains and stresses distributions were observed and compared with previous experimental works. These will help us to understand micro interaction between UV laser beam and material.

키워드

참고문헌

  1. F. Lusquinos, J.C. Conde, S. Bonss, A. Riveiro, F. Quintero, R. Cornesana, I. Pou, "Theoretical and experimental analysis of high power diode laser (HPDL) hardening of AISI 1045 steel", Applied Surface Science, pp.948-954, No.254, 2007
  2. 오재용, 신보성, "355nm UV 레이저 가공에 의한 폴리이미드의 광화학적 및 광열적 어블레이션에 관한 연구", 한국정밀공학회지, 제24권 제 4호, pp.147-152, 2007
  3. 오재용, 신보성, "355nm UV 레이저를 이용한 구리 박판 가공 시 어블레이션에 관한 연구", 한국정밀공학회지, 제24권 제2호, 2007
  4. Tongxiang Hu, Zhenqiang Yao, Jun Hu, "3-D FEM simulation of laser shork processing", Surfase & Coatings Technology, 201, pp.1426-1435, 2006 https://doi.org/10.1016/j.surfcoat.2006.02.018
  5. Yongxiang Hu and Zhenqiang Yao, "Numerical simulation and experimentation of overlapping laser shock processing with symmetry cell", International Journal of Machine Tools & Manufacture, No.48, pp.152-162, 2008
  6. 신보성, 제태진, "초정밀 고속가공 공정에서의 변형률 속도를 고려한 전산 시뮬레이션 해석에 관한 연구", 한국기계가공학회지, 제5권 제2호, 2006
  7. Wenwu Zhang and Y. Lawrense Yao, "Microscale Laser Shock Processing-Modeling, Testing and microstructure Characterization", Journal of Manufacturing Processes, Vol.3/No.2, pp.128-143, 2001 https://doi.org/10.1016/S1526-6125(01)70128-4
  8. K. Ding and L. Ye, "Three-dimentional dynamic finite element analysis of multiple laser shock peening processes", Surface Engineering, Vol. 19, No.5, pp.351-358, 2003 https://doi.org/10.1179/026708403225007563
  9. Online Materials Information Resource -Matweb. http://www.matweb.com/
  10. Hajime ENDOH and Kiyotaka SAKINO, "Rate Controlling Mechanism on Copper at Very High Strain Rates and High Temperatures", Bulletin of the College of Engineering, Hosei University, NOAO, pp.17-20, 2004
  11. LS-DYNA user's manual version 971, 2007