참고문헌
- Fieret, J., Terry, M. J., Ward, B. A., "Overview of flow dynamics in gas-assisted laser cutting," SPIE High Power Lasers, Vol. 801, pp. 243-250. 1987
- 방세윤, 한유희,"레이저 절단에서의 노즐 및 가스제트의 영향," 대한용접학회지, 제12권, 제2호, pp. 1-10. 1994
- Man, H. C. et al., "Analysis of the dynamic characteristics of has flow inside a laser cut kerf under high cut-assit gas pressure," J. Phys. D: Appl. Phys., Vol. 32, pp. 1467-1477. 2000
- Fieret, J., Rand, C., "Cutting thin steel sheet," Industral Laser Solutions, Feb., wwwe.industrial-laser.com, 2007
- Duan, J., Man, H. C., Yue, T. M., "Modelling the laser fusion cutting process: Effect of various process parameters on cut kerf quality," J. Physics D: Appl. Phys. 34, pp. 2143-2150. 2001 https://doi.org/10.1088/0022-3727/34/14/310
- Kovalev, O. B., Yudin, P. V., Zaitsev, A. V., "Modeling of flow seperation of assist gas as applied to laser cutting of thick sheet metal," Applied Mathematical Modelling, Vol. 33, pp. 3730-3745, 2009 https://doi.org/10.1016/j.apm.2008.12.011
- Quintero, F. et al, "Comparative study of the influence of the gas injection system on Nd:yttrium-aluminium-garnet laser cutting of advanced oxide ceramics," Rev. Sci. Instrum., Vol. 74, No. 9, pp. 4199-4205, 2003 https://doi.org/10.1063/1.1597953
- Heo, J. Y. et al, " Fluidic Thrust Vector Control of Supersonic Jet Using Co-flow Injection ", 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, AIAA 2009-5174, 2009
- Yang, Z., Shih, T. H., "New Time Scale Based Model for Near Wall Turbulence," AIAA Journal, Vol. 31, pp. 1191-1197, 1993 https://doi.org/10.2514/3.11752
- 손상혁, 민성규, 이 열, "레이저 절단에서 나타나는 보조가스의 절단면 충돌유동 가시화," 한국기계가공학회 2010년도 춘계학술대회논문집, 2010