한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제9권1호
  • /
  • Pages.8-13
  • /
  • 2010
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지

디스케일 장비설계를 이용한 샤프트 표면가공

Surface Machining of Shaft by Descale Machine Design

  • 김우강 (충남대학교 대학원 기계공학부) ;
  • 고준빈 (한밭대학교 기계설계공학과)
  • 투고 : 2009.10.28
  • 심사 : 2010.01.12
  • 발행 : 2010.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The shaft surface machining is a popular machine for studying descale machine design and process in automobile industry. In this study, the descale design machine of cutting shaft surface was conducted for the detection of a tool failure in surface process. Induction harden surface is used as analyzing function to detect a sudden change in cutting process level. A preliminary stepped workpiece which had a hard condition was cut by the surface tool and a tool process obtained cutting force machine. At machine failure, the results were suddenly increased and the detailed surfaces were extremely obtained.

키워드

참고문헌

  1. Jung, S. K. and Lee, S. H., "A Guide of shot peening Processing," Se Hwa Publishing Company, pp. 6-12, 2001.
  2. Gillespie, R. D., "Its Effect on Process Consistency and Resultant Improvement in Fatigue Characteristics," Proc. of the 5th International Conference on Shot peening, Vol. 1, Oxford, pp. 81-90, 1993.
  3. Wohlfahrt, H., "The Influence of Peening Conditions on the Resulting Distribution of Residual Stress," Proc. of the 2th International Conference on Shot peening, Vol. 1, Chicago, pp. 316-331, 1984.
  4. Rowe, W. B., Black, S. C. E. and Mills, B., "Experimental Investigation of Heat Transfer in Grinding", Annals of CIRP, Vol. 44, No. 1, pp. 329-332, 1995. https://doi.org/10.1016/S0007-8506(07)62336-1
  5. Eshghy, S., 1967, "Thermal Aspects of the abrasive Cutoff Operation. Part 1-Theoretical Analysis," ASME journal Engineering for Industry, Vol. 89, pp. 356-360. https://doi.org/10.1115/1.3610052
  6. Wang, D. H., "A Study on the Machine Surface Morphology of Laminate Composite", KSPE, Vol. 12, pp. 130-138, 1995.
  7. Asai, S., Taguchi, Y., Horio, K., Kasai, T., "Measuring the Very Small Cutting-Edge Radius for a Diamond Tool Using a New Kind of SEM Having Two Detectors", Annals of the CIRP, Vol. 39, No. 1, pp. 85-88. 1990. https://doi.org/10.1016/S0007-8506(07)61008-7
  8. McKeown, P., "Manufacturing - how small can we go The challenge and opportunities of the nanometer age", The British Association Lecture, 1996.
  9. Chitra Dorai, "Registration and Integration of Nultiple Object Views for 3C Model Construction", IEEE Transaction on Pattern analysis and Machine Intelligence, 1998.
  10. Shimada, S., Ikawa, N., Tanaka, H. J., Uchikoshi, "Structure of Micromachined Surface Simulated by Molecular Dynamics Analysis", Annals of the CIRP, Vol. 43, Jan., pp. 51-54, 1994. https://doi.org/10.1016/S0007-8506(07)62162-3
  11. Hong, M. S., Oh, W. K., Park, S. K., 2000, "Automotive engineering", Won Chang Publising Company, pp.215-222, 1994.