참고문헌
- Korean Dental Materials Professor Association: Dental Materials. 5th ed. Koonja, Seoul, pp. 125-159, 2006.
- Klooster J, Logan GI, Tjan AH: Effect of strain rate on the behavior of elastomeric impression. J Prosthet Dent 66(3): 292-8, 1991. https://doi.org/10.1016/0022-3913(91)90252-R
- Goldberg AJ: Viscoelastic properties of silicone, polysulfide, and polyether impression materials. J Dent Res 5(53): 1033-9, 1974.
- Tjan AH et al.: Clinically oriented evaluation of the accuracy of commonly used impression materials. J Prosthet Dent 56(1): 4-8, 1986. https://doi.org/10.1016/0022-3913(86)90272-6
- Dounis GS, Ziebert GJ, Dounis KS: A comparison of impression materials for complete-arch fiexd partial dentures. J Prosthet Dent 65(2): 165-9, 1991. https://doi.org/10.1016/0022-3913(91)90157-R
- Yeh CL, Powers JM, Craig RG: Properties of addition-type silicone impression materials. J Am Dent Assoc 101(3): 482-4, 1980. https://doi.org/10.14219/jada.archive.1980.0321
- Lacy AM et al.: Time-dependent accuracy of elastomer impression materials. Part II: Polyether, polysulfides, and polyvinylsiloxane. J Prosthet Dent 45(3): 329-33, 1981. https://doi.org/10.1016/0022-3913(81)90400-5
- Oh YI et al: Effect of surface Hydrophilicity on detail reproducibility of hydrophilic polyvinyl siloxane impression materials. J Korean Res Soc Dent Mater 30(3): 299-306, 2003.
- Robert S, Edward C, Brandon S: Effect of surface treatments on the wettability of vinyl polysiloxane impression materials. J Prosthet Dent 84(1): 98-102, 2000. https://doi.org/10.1067/mpr.2000.106720
- Michael NM: Polyvinyl siloxane impression materials: an update on clinical use. Aust Dent J 43(6): 428-434, 1998. https://doi.org/10.1111/j.1834-7819.1998.tb00204.x
- Millar BJ, Dunne SM, Nesbit M: A comarison of three wetting agents used to facilitate the pouring of dies. J Prosthet Dent 74(4): 341-344, 1995. https://doi.org/10.1016/S0022-3913(05)80371-3
- Erkut S, Can G: Effects of glow-discharge and surfactant treatments on the wettability of vinyl polysiloxane impression materials. J Prosthet Dent 93(4): 356-363, 2005. https://doi.org/10.1016/j.prosdent.2005.01.014
- Marcinak CF, Draughn RA: Linear dimensional changes in addition curing silicone impression materials. J Prosthet Dent 47(4): 411-413, 1982. https://doi.org/10.1016/S0022-3913(82)80092-9
- Fano V, Gennari PU, Ortalli I: Dimensional stability of silicone-based impression materials. Dental Materials 8(2): 105-109, 1992. https://doi.org/10.1016/0109-5641(92)90064-J
- Chew CL, Chee WW, Donovan TE: The influence of temperature on the dimensional stability of poly (vinyl siloxane) impression materials. Int J Prosthodont 6(6): 528-532, 1993.
- John CB et al.: Temperature effects on the rheological properties of current polyether and polysiloxane impression materials during setting. J Prosthet Dent 90(2): 150-161, 2003. https://doi.org/10.1016/S0022-3913(03)00297-X
- Ravi P et al.: Long-term dimensional stability and reproduction of surface detail of four polyvinyl siloxane duplication materials. J Dent 36(6): 456-461, 2008. https://doi.org/10.1016/j.jdent.2008.03.003
- McCabe JF, Arikawa H: Rheological properties of elastomeric impression materials before and during setting. J Dent Res 77(11): 1874-1480, 1998. https://doi.org/10.1177/00220345980770110301
- McConnell RJ, Johnson LN, Gratton DR: Working time of synthetic elastomeric impression materials. J Can Dent Assoc 60(1): 49-54, 1994.
- John HP et al.: The effects of different storage conditions on polyether and polyvinylsiloxane impressions. J Am Dent Assoc 129(7): 1014-1021, 1998. https://doi.org/10.14219/jada.archive.1998.0356
- 황수영: 항균필러가 첨가된 치과용 실리콘 고무인상재[박사학위논문]. 연세대학교 대학원, 서울, 2008.
- Finger WJ: Significance of filler content to properties of silicone impression materials. Dent Mater 4(1): 33-37, 1988. https://doi.org/10.1016/S0109-5641(88)80085-X
- Chen SY, Liang WM, Chen FN: Factors affecting the accuracy of elastometric impression materials. J Dent 32(8): 603-609, 2004. https://doi.org/10.1016/j.jdent.2004.04.002
- John C, Yutaka T, Eugene PL: Clinically relevant mechanical properties of elastomeric impression materials. Int J Prosthodont 11(3): 219-223, 1998.
- Lorren RA, Salter DJ, Fairhurst CW: The contact angle of die stone on impression materials. J Prosthet Dent 36(2): 176-180, 1976. https://doi.org/10.1016/0022-3913(76)90140-2
- Pratten DH, Craig RG: Wettability of a hydrophilic addition silicone impression material. J Prosthet Dent 61(2): 197-202, 1989. https://doi.org/10.1016/0022-3913(89)90373-9
- Panichuttra R et al.: Hydrophilic poly(vinylsiloxane) impression materials: dimensional accuracy, wettability, and effect on gypsum hardness. Int J Prosthodont 4(3): 240-248, 1991.
- Kim SH et al.: Change of surface property of dental impression materials according to time and disinfection. Surf Interface Anal. 40(3-4): 188-191, 2008. https://doi.org/10.1002/sia.2772