DOI QR코드

DOI QR Code

직선배관 타원변형을 고려한 엘보우 거동

Behavior of Elbows with Ovalization of the Tangential Pipes

  • 이상호 (단국대학교 토목환경공학과) ;
  • 송현섭 (단국대학교 토목환경공학과)
  • 투고 : 2010.10.20
  • 심사 : 2010.12.17
  • 발행 : 2010.12.31

초록

단면의 타원변형을 고려할 수 있는 요소를 사용하여 엘보우의 기하학적 비선형 거동을 설명하고 직선배관의 타원변형이 엘보우에 미치는 영향을 파악하였다. 또한 직선배관의 길이와 엘보우 휨 각도 사이의 관계를 파악하여 ASME 코드 식의 보완점과 올바른 해석결과를 얻는데 필요한 직선배관의 길이를 제시하였다.

The effects of the ovalization of the tangential pipes to the elbows are analyzed. The geometric nonlinear behaviors of the elbows are shown with the element capable of ovalization. The relationships between the length of the tangential pipes in the models and the bend angles of the elbows are analyzed to supplement the ASME code. And the proper length of the tangential pipes for the elbow models are suggested.

키워드

참고문헌

  1. von T. Karman, "Uber die Formanderung Dunnwandiger Rohre, insbesondere federnder Ausgleichrohre", Zeits V.D.I., pp1889-1895, Vol. 55, 1911.
  2. W. Hovgaard, "The Elastic Deformation of Pipe Bends", Journal of Mathematics and Physics, Masschusetts Institute of Technology, pp. 69-118, Vol. 6, 1926.
  3. L. Beskin, "Bending of Curved Thin Tubes", Journal of Applied Mechanics, pp. A1-A7, Mar. 1945.
  4. A. M. Wahl, "Stresses and Reactions in Expansion Pipe Bends", Pressure Vessel and Piping Design, ASME, pp. 336-357, 1960.
  5. E. C. Rodabaugh and H. H. George, "Effect of Internal Pressure on Flexibility and Stress-Intensification Factors of Curved Pipe or Welding Elbows", Transactions of the ASME Vol.79, pp. 336-357, 1957.
  6. G. Thomson and J. Spence, "Maximum Stresses and Flexibility Factors of Smooth Pipe Bends with Tangent Pipe Terminations under In-Plane Bending", Journal of Pressure Vessel Technology, Transactions of the ASME, Vol. 105, pp. 329-336, 1983. https://doi.org/10.1115/1.3264289
  7. J. F. Whatham, "Pipe Bend Analysis by Thin Shell Theory", Journal of Applied Mechanics, Transactions of the ASME, Vol. 53, pp. 173-180, 1986 https://doi.org/10.1115/1.3171707
  8. ASME Boiler and Pressure Vessel Code, Section III "Rules for Construction of Nuclear Power Plant Components", Division I, Subsection NB, Class 1 Components, 2004.
  9. K. Kussamaul, H. K. Diem, Uhlmann, D. E. Kobes, 1995, "Pipe bend behaviour at load levels beyond design", (SMiRT 13), Brazil, pp187-198.
  10. Abaqus, User's Manual, Version 6.7.1, 2007.