Korean Chemical Engineering Research

  • 제48권3호
  • /
  • Pages.409-412
  • /
  • 2010
  • /
  • 0304-128X(pISSN)
  • /
  • 2233-9558(eISSN)
한국화학공학회 (The Korean Institute of Chemical Engineers)
권호 표지

도시 폐기물 폐목재의 건조 특성

Drying Characteristics of Municipal Wood Waste

  • 최정후 (건국대학교 화학공학과) ;
  • 김민하 (건국대학교 화학공학과) ;
  • 조미영 (건국대학교 화학공학과) ;
  • 박기훈 (건국대학교 화학공학과) ;
  • 장은진 (건국대학교 화학공학과) ;
  • 이종민 (한전전력연구원 녹색성장연구소)
  • Choi, Jeong-Hoo (Department of Chemical Engineering, Konkuk University) ;
  • Kim, Min Ha (Department of Chemical Engineering, Konkuk University) ;
  • Jo, Mi Young (Department of Chemical Engineering, Konkuk University) ;
  • Park, Ki Hoon (Department of Chemical Engineering, Konkuk University) ;
  • Jang, Eunjin (Department of Chemical Engineering, Konkuk University) ;
  • Lee, Jong-Min (Green Growth Laboratory, Korea Electric Power Research Institute, KEPCO)
  • 투고 : 2010.02.12
  • 심사 : 2010.03.22
  • 발행 : 2010.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 질소 분위기의 등온 열중량 분석기를 사용하여 도시 폐기물 폐목재 시료 wood, particle board, MDF의 건조특성을 측정 및 고찰하였다. 폐목재의 건조속도는 잔류 수분 분율에 대한 1차 반응속도로 잘 표현되었다. 건조 활성화 에너지는 12.72~18.31 kJ/g mol, 빈도인자는 0.2155~1.249 1/s이었다.

This study investigated and discussed the drying characteristics of municipal wood wastes (wood, particle board, medium density fiber-board(MDF)) in the $N_2$ environment with an isothermal thermogravimetric analyzer. The drying rate could be expressed by a first order reaction model on remaining fraction of moisture. The activation energy ranged from 12.72 kJ/g mol to 18.31 kJ/g mol and the frequency factor from 0.2155 1/s to 1.249 1/s.

키워드

참고문헌

  1. Li, X., Zhang, B., Li, W. and Li, Y., "Research on the Effect of Microwave Pretreatment on Moisture Diffusion Coefficient of Wood," Wood Sci. Technol., 39(7), 521-528(2005). https://doi.org/10.1007/s00226-005-0007-z
  2. Cai, Y. and Hayashi, K., "Contribution of Evaporation from Transverse Sections to Drying Rate During Radio-frequency/vacuum Drying," Mokuzai Gakkaishi, 48(2), 73-79(2002).
  3. Alexiou, P. N., Wilkins, A. P. and Hartley, J., "Effect of Presteaming on Drying Rate, Wood Anatomy and Shrinkage of Regrowth Eucalyptus Pilularis Sm," Wood Sci. Technol., 24(1), 103-110(1990).
  4. Wen, C.-Y. and Loos, W. E., "Rate of Veneer Drying in a Fluidized Bed," Wood Sci., 2(2), 87-90(1969).
  5. Sinclair, D., "Drying Wood Fiberboard," Tappi, 50(8), 424-432(1967).
  6. Choi, J.-H., Kim, M. H., Jo, M. Y., Park, K. H., Jang, E. and Lee, J.-M., "Devolatilization Characteristics of Municipal Wood Waste," Korean Chem. Eng. Res., 48(1), 16-19(2010).
  7. Shafrinskii, Yu. S., "Granulation of Oxidized Lead-Zinc Ores," Izvestiya Fiziko-Khimicheskogo Nauchno-Issledovatel'skogo Instituta pri Irkutskom Gosudarstvennom Universitete, 7(1), 76-94(1966).
  8. Mayatskii, V. A., Sokolov, L. B., Gerasimov, V. D. and Kasyanets, A. V., "Drying of Aromatic Polyamides," Zhurnal Prikladnoi Khimii (Sankt-Peterburg, Russian Federation), 57(7), 1632-1636(1984).
  9. Roberts, J. S. and Tong, C. H., "Drying Kinetics of Hygroscopic Porous Materials under Isothermal Conditions and the Use of a First-Order Reaction Kinetic Model for Predicting Drying," Int. J. Food Propert., 6(3), 355-367(2003). https://doi.org/10.1081/JFP-120021337
  10. Waje, S. S., Meshram, M. W., Chaudhary, V., Pandey, R., Mahanawar, P. A. and Thorat, B. N., "Drying and Shrinkage of Polymer Gels," Brazilian J. Chem. Eng., 22(2), 209-216(2005). https://doi.org/10.1590/S0104-66322005000200007
  11. Arora, S., Bharti, S. and Sehgal, V. K., "Convective Drying Kinetics of Red Chillies," Dry. Technol., 24(2), 189-193(2006). https://doi.org/10.1080/07373930600559068
  12. Villeneuve, S. and Gelinas, P., "Drying Kinetics of Whole Durum Wheat Pasta according to Temperature and Relative Humidity," LWT-Food Sci. Technol., 40(3), 465-471(2006).
  13. Di Scala, K. and Crapiste, G., "Drying Kinetics and Quality Changes during Drying of Red Pepper," LWT-Food Sci. Technol., 41(5), 789-795(2008). https://doi.org/10.1016/j.lwt.2007.06.007
  14. Tari, O. and Pekcan, O., "Study of Drying of ${\kappa}$-Carrageenan Gel at Various Temperatures Using a Fluorescence Technique," Dry. Technol., 26(1), 101-107(2008).