Korean Chemical Engineering Research

  • 제48권3호
  • /
  • Pages.355-358
  • /
  • 2010
  • /
  • 0304-128X(pISSN)
  • /
  • 2233-9558(eISSN)
한국화학공학회 (The Korean Institute of Chemical Engineers)
권호 표지

유도 결합형 저온 플라즈마 처리에 따른 폴리카보네이트 표면 특성 변화

Influence of Inductively Coupled Plasma on Surface Properties of Polycarbonate

  • 원동수 (강원대학교 화학공학과) ;
  • 이원규 (강원대학교 화학공학과)
  • Won, Dong Su (Department of Chemical Engineering, Kangwon National University) ;
  • Lee, Won Gyu (Department of Chemical Engineering, Kangwon National University)
  • 투고 : 2010.01.29
  • 심사 : 2010.03.06
  • 발행 : 2010.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

유도 결합 저온 플라즈마를 사용하여 폴리카보네이트 시료를 처리한 후 표면 특성 변화를 분석하였다. 표면 거칠기는 플라즈마 공정조건에 상관없이 표면 처리 후에 모두 증가하였으나, 산소 분위기에서 플라즈마 처리했을 때 가장 크게 증가하였다. 표면의 화학 결합 분석에서 플라즈마 처리 전 시료의 산소 함량이 산소 플라즈마 처리 후에 43% 증가하여 표면에 친수성 극성기의 형성이 촉진되었다. 공정 변수 중, 처리 시간에 따른 접촉각 변화는 산소 분위기에서 가장 낮은 접촉각 $9.17^{\circ}$을 얻을 수 있었고, 방전 전력의 증가는 같은 처리 시간에서 빠르게 접촉각의 감소를 보여 플라즈마 표면처리 시간을 단축시키는 효과를 주었다. 그러나 방전기체 유량의 증가에 대한 접촉각 변화에 대한 영향성이 크지 않았다.

Inductively coupled low temperature plasmas with oxygen, argon, mixture of oxygen and argon, and nitrogen have been used to modify polycarbonate(PC) films at the various process conditions. All plasma treatments generally had a tendency to increase the surface roughness of PC regardless of process conditions. The treatment of oxygen plasma showed the highest value in the surface roughness and mostly enhanced the generation of oxygen containing polar groups as much as 43% in comparison of untreated PC. The contact angle of untreated PC decreased from $82.31^{\circ}$ to the lowest value of $9.17^{\circ}$ after oxygen plasma treatment. The increase of RF delivered power had an effect on the rapid reduction of contact angle, but gas flow rates did not effect to reduce contact angles so much.

키워드

참고문헌

  1. Kim, J. T. and Lee, D. C., "A Study of the Surface Modification of Polyimide Film by Ion Implantation," J. KIEEME, 11(4), 293-297(1998).
  2. Han, S. H., Lee, Y. H., Kim, H. D. and Kim, G. H., "Polymer Surface Modification by Plasma Source Ion Implantation," Surf. Coat. Technol., 93(2), 261-264(1997). https://doi.org/10.1016/S0257-8972(97)00057-1
  3. Kang, S. M., Yoon, S. G., Jung, W. S. and Yoon, D. H., "The Plasma Modification of Polycarbonate and Polyethersulphone Substrates for $Ta_2O_5$ Thin Film Deposition," J. Korea Ceram. Soc., 43(1), 38-41(2006). https://doi.org/10.4191/KCERS.2006.43.1.038
  4. Kim, Y. H. and Wool, R. P., "A Theory of Healing at a Polymer-Polymer Interface," Macromolecules, 16(7), 1115-1120(1983). https://doi.org/10.1021/ma00241a013
  5. Jia, W. and Chen, X., "Effect of Polymer Filler interaction on PTC Behaviors of LDPE/EPDM Blends Filled with Carbon Blacks," J. Appl. Polym. Sci., 66(10), 1885-1890(1997). https://doi.org/10.1002/(SICI)1097-4628(19971205)66:10<1885::AID-APP5>3.0.CO;2-J
  6. Papirer, E. and Wu, D. Y., "Study of the Behavior and Conformation of Linear Hydrocarbon Chains Grafted on the Surface of Carbon Black," Carbon, 28(2-3), 393-399(1990). https://doi.org/10.1016/0008-6223(90)90013-O
  7. Park, S. J. and Kim, J. S., "Modifications Produced by Electrochemical Treatments on Carbon Blacks: Microstructures and Mechanical Interfacial Properties, " Carbon, 39(13), 2011-2016(2001). https://doi.org/10.1016/S0008-6223(01)00015-X
  8. Kang, E. T., Tan, K. L., Kato, K., Uyama, Y. and Ikada, Y., "Surface Modification and Functionalization of Polytetrafluoroethylene Films," Macromolecules, 29(21), 6872-6879(1996). https://doi.org/10.1021/ma960161g
  9. Nihlstrand, A., Hjertberg, T. and Johansson, K., "Plasma Treatment of Polyolefins: Influence of Material Composition: 1. Bulk and Surface Characterization", Polymer, 38(14), 3581-3589(1997). https://doi.org/10.1016/S0032-3861(96)00930-5
  10. Chen, J. R. and Wakida, T., "Studies on the Surface Free Energy and Surface Structure of PTFE Film Treated with Low Temperature Plasma," J. Appl. Polym. Sci., 63(13), 1733-1739(1997). https://doi.org/10.1002/(SICI)1097-4628(19970328)63:13<1733::AID-APP4>3.0.CO;2-H
  11. Good, R. J., "Contact Angle, Wetting, and Adhesion : A Critical Review," J. Adhesion Sci. Technol., 6(12), 1269-1302(1992). https://doi.org/10.1163/156856192X00629
  12. Roth, J. R., Industrial Plasma Engineering, 1: Principles, Institute of Physics, London, (2001).
  13. Roth, J. R., Industrial Plasma Engineering, 2: Applications to Nonthermal Plasma Processing, Institute of Physics, London, (2001).
  14. Khler, M., Etching in Microsystem Technology, Wiley-VCH, Weinheim(1999).
  15. Yasuda, H., "Plasma Polymerization," Academic Press, Orlando, FL(1985).
  16. Lee, J. S., Sin, H. S., Seok, J. W., Jang, G. W. and Beag, Y. H. "Surface Modification of Polystyrene (PS) by Atmospheric Pressure Plasma," J. Korea Vac. Soc., 18(1), 1-8(2009). https://doi.org/10.5757/JKVS.2009.18.1.001
  17. Bae, K. S., Eom, J. S., Lee, I. S., Kim, S. H., Ko, Y. B. and Kim, D. W., "Adhesion of Cu on Polycarbonate with the Condition of Surface Modification and DC-Bias Sputtering Deposition," J. Korea. Inst. Surf. Eng., 37(1), 5-12(2004).