References
- Lashtabeg, A. and Skinner, S. J., "Solid Oxide Fuel Cells-a Challenge for Materials Chemistry," J. Mater. Chem., 16, 3161-3170(2006). https://doi.org/10.1039/b603620a
- Yakabe, H., Hishinuma, M., Uratani, M., Matsuzaki, Y., Yasuda, I., "Evaluation and Modeling of Performance of Anode-supPorted Solid Oxide Fuel Cell," J. Power Sources, 86, 423-431(2000). https://doi.org/10.1016/S0378-7753(99)00444-9
- Zhu, W. Z., Deevi, S. C., "Development of Interconnect Materials for Solid Oxide Fuel Cells," Mat. Sci. and Eng., A348, 227-243(2003).
- Schafer, W., Koch, A., Herold-Schmidt, U. and Stolten, D., "Materials, Interfaces and Production Techniques for Planar Solid Oxide Fuel Cells," Solid State Ionics, 1235-1239(1996).
- Koch, S. and Hendriksen, P. V., "Contact Resistance at Ceramic Interfaces and Its Dependence on Mechanical Load," Solid State Ionics, 168(1), 1-11(2004). https://doi.org/10.1016/j.ssi.2004.01.010
- Zhu, W. Z. and Deevi, S. C., "Opportunity of Metallic Interconnect for Solid Oxide Fuel Cells: a Status on Contact Resistance," Mat. Res. Bull, 38, 957-972(2003). https://doi.org/10.1016/S0025-5408(03)00076-X
-
Kim, J.-H., Song, R.-H. and Hyun, S.-H., "Effect of Slurry-coated
$LaSrMnO_3$ on the Electrical Property of Fe-Cr Alloy for Metallic Interconnect of SOFC," Solid State Ionics, 174(1-4), 185-191(2004). https://doi.org/10.1016/j.ssi.2004.07.032 -
Yang, Z., Xia, G. and Stevenson, J. W., "
$Mn_{1.5}Co_{1.5}O_4$ Spinel Protection Layers on Ferritic Stainless Steels for SOFC Interconnect Applications", Electrochem. Solid-State Lett., 8(3), 168-170(2005). https://doi.org/10.1149/1.1854122 - Yang, Z., Xia, G.-G., Maupin, G. D., Stevenson, J. W., "Conductive Protection Layers on Oxidation Resistant Alloys for SOFC Interconnect Applications," Surf. Coat. Technol., 201, 4476-4483 (2006). https://doi.org/10.1016/j.surfcoat.2006.08.082
- Stoermer, A. O., Rupp, J. L. M. and Gauckler, L. J., "Spray Pyrolysis of Electrolyte Interlayers for Vacuum Plasma-sprayed SOFC," Solid State Ionics, 177, 2075-2079(2006). https://doi.org/10.1016/j.ssi.2006.06.033
- Zhu, W. Z. and Deevi, S. C., "Opportunity of Metallic Interconnect for Solid Oxide Fuel Cells: a Status on Contact Resistance," Mat. Res. Bull, 38, 957-972(2003). https://doi.org/10.1016/S0025-5408(03)00076-X
- Chen, X., Hou, P. Y., Jacobson, C. P., Visco, S. J. and De Jonghe, L. C., "Protective Coating on Stainless Steel Interconnect for SOFCs: Oxidation Kinetics and Electrical Properties," Solid State Ionics, 176, 425-433(2005). https://doi.org/10.1016/j.ssi.2004.10.004
- H. M, Kim, S. D., Hyun, S. H. and Kim, H. S., "Development of IT-SOFC Uint Cells with Anode-supported thin Electrolytes Via Tape Casting and Co-firing," Inter. J. Hydro Energy, 33, 1758-1768(2008). https://doi.org/10.1016/j.ijhydene.2007.12.062
- Yang, Z., Weil, K. S., Paxton, D. M. and Stevenson, J. W., "Selection and Evaluation of Heat-Resistant Alloys for SOFC Interconnect Applications", J. Electrochem. Soc., 150(9), 1188-1201(2003). https://doi.org/10.1149/1.1595659
- Ebnesajjad and Sina, "Surface Treatment of Materials for Adhesion Bonding," William Andrew Publishing(2006).
- Pawlowski, L., "The Science and Engineering of Thermal Spray Coatings," John Wiley & Sons Ltd.(1995).
- Snogren, R. C., "Handbook on Surface Preparation," Palmerton publishing(1974).