참고문헌
- K. H. Lee, J. R. Cho, W. B. Bae, 1997, A Study on the Hot Free Forging of the Heavy Rotors Using Conventional Dies, KSTP, Vol. 6, No. 3, pp. 203-212.
- C. Y. Park, J. R. Cho, D. Y. Yang, D. J. Kim, I. S. Park, 1992, Analysis of Void Closure in the Upsetting Process of Large-Ingot, Trans. KSME, Vol. 16, No. 10, pp. 1877-1889.
- M. C. Song, I. K. Kwon, Y. G. Park, 2007, A Study on the Parameters Determining the Void Crushing Ratio in the Cogging Process of Large Forged Products, KSTP, Vol. 16, No. 7, pp. 502-508. https://doi.org/10.5228/KSPP.2007.16.7.502
- M. Tanaka, S. Ono and M. Tsuneno, 1986, Factors Contributing to Crushing of Voids during Forging, JSTP, Vol.27, No. 306, pp. 852-859.
- M. Tateno and S. Shikano, 1966, Study on Closing of Internal Cavities in Heavy Forgings by Hot Free Forging, JSTP, Vol. 7, No. 65, pp. 299-308.
- C. Y. Park and D. Y. Yang, 1997, Modeling of Void Crushing for large ingot hot forging, JSTP, Vol. 67, pp. 195-200. https://doi.org/10.1016/S0924-0136(96)02843-9
- J. R. Cho, D. K. Kim, Y. D. Kim, B. Y. Lee, 1996, Study on Internal Void Closure in Slab ingot during Hot Plate Forging, KSTP, Vol. 5, No. 1, pp. 18-26.
- T. Pardoen, J.W. Hutchinson, 2000, An extended model for void growth and coalescence, J. Mech. Phys. Soilds, Vol. 48, No. 1, pp. 2467-2512. https://doi.org/10.1016/S0022-5096(00)00019-3
- M. S. Chun, J. S. Ryu, Y. H. Moon, 2004, FEM Analysis of Void Closure Behavior during Open Die Forging of Rectangular Billets, KSTP, Vol. 13, No. 2, pp. 148-153. https://doi.org/10.5228/KSPP.2004.13.2.148
- S. Hamzah, U. StaÊhlberg, 2001, A new pore closure concept for the manufacturing of heavy rings, J. Mater. Proc. Tech., Vol. 110, No. 1, pp. 324-333. https://doi.org/10.1016/S0924-0136(00)00895-5
- A. Wang, P.F. Thomson, P.D. Hodgson, 1996, A study of pore closure and welding in hot rolling process, J. Mater. Proc. Tech., Vol. 60, No. 1, pp. 95-102. https://doi.org/10.1016/0924-0136(96)02313-8
- S. Hamzah, U. StaÊhlberg, 1998, A study of pore closure in the manufacturing of heavy rings, J. Mater. Proc. Tech., Vol. 84, No. 1, pp. 25-37. https://doi.org/10.1016/S0924-0136(98)00075-2
피인용 문헌
- Process Design for Manufacturing 1.5wt%C Ultrahigh Carbon Workroll: Void Closure Behavior and Bonding Strength vol.22, pp.5, 2013, https://doi.org/10.5228/KSTP.2013.22.5.269
- Forging of 1.9wt%C Ultrahigh Carbon Workroll : Part II - Void Closure and Diffusion Bonding vol.22, pp.8, 2013, https://doi.org/10.5228/KSTP.2013.22.8.463
- Forging of 1.9wt%C Ultrahigh Carbon Workroll : Part I - Analysis on Void Formation and Microstructure vol.22, pp.8, 2013, https://doi.org/10.5228/KSTP.2013.22.8.456