ICROS (제어로봇시스템학회지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지

손 재활 로봇 연구동향

  • Published : 2010.09.25
Download PDF
⟨ Previous Next ⟩

Abstract

손 재활 로봇 연구의 목표는 손 기능 장애를 갖는 환자들을 대상으로 치료사를 대신하여 치료는 수행하는 것이다. 일반적으로 손의 운동기능 장애는 골절, 인대 손상 또는 노화에 의한 근력 소실에 의해 발생하거나 뇌졸중이나 파킨슨병, 척수 손상 등에 의한 신경계 문제에 의해 발생할 수 있다.

Keywords

References

  1. J.J. Dias, K.C. Chung, M. Garcia-Elias, S.R Sabapathy, and J.B. Tang, "Recommendations for the improvement of hand injury care across the world' , Injury, Int. J. Care Injured, vol. 37, pp. 1078-1082, 2006. https://doi.org/10.1016/j.injury.2006.07.022
  2. 통계청, "2009 한국의사지표-부양 비 및 고령화지수," 2009.
  3. 통계청, "사망원인통계연보[전국편] 성, 연령, 사망원인별 사망률," 2008.
  4. "급성기 뇌졸중 적정성 추구 평가결과," 건강보험심사평가원, 2009.
  5. H. S. Park, Y. Ren, and L. Q. Zhang, "IntelliArm: an exoskeleton for diagnosis and treatment of patients with neurological impairments," in proc. 2nd Biennial IEEE/RAS-EMBS Int. Conf. on Biomedical Robotics and Biomechatronics, 2008.
  6. T. G. Sugar, H. Jiping, E. J. Koeneman, J. B. Koeneman, R. Heman, H. Huang, R. S. Schullz, D. E. Hening, J. Wanberg, S. Balasubramanian, P. Swenson, and J. A. Ward, ''Design and Control of RUPERT: A Device for Robotic Upper Extremity Repetitive Therapy" , IEEE Transactions on Neural Systems and Rehabilitation Engineering, vol. 15, no. 3, pp. 336-346, 2007. https://doi.org/10.1109/TNSRE.2007.903903
  7. P. Stergiopoulos, P. Fuchs, and C. Laurgeau, "Design of a 2-Finger Hand Exoskeleton for VR Grasping Simulation" , Research paper of PERF-RV Project, A5 Action.
  8. TM Bouzit, G Burdea, G Popescu, and R Boian, 'The Rutgers Master II-new design force-feedback glove" , IEEE/ASME Transactions On Mechatronics, vol. 7, no. 2, 2002.
  9. S. Ito, H. Kawasakia, Y. Ishigureb, M. Natsumec, T. Mouria, and Y. Nishimoto, "A design of fine motion assist equipment for disabled hand in robotic rehabilitation system," Journal of the Franklin Institute, 2008.
  10. A. Wege, and A. Zimmermann, "Electromyography Sensor Based Control for a Hand Exoskeleton" , in proc. of the IEEE Int. Conf. on Robotics and Biomimetics, 2007.