한국세라믹학회지 (Journal of the Korean Ceramic Society)

  • 제47권1호
  • /
  • Pages.75-81
  • /
  • 2010
  • /
  • 1229-7801(pISSN)
  • /
  • 2234-0491(eISSN)
한국세라믹학회 (The Korean Ceramic Society)
권호 표지
DOI QR코드

DOI QR Code

Thin Film (La0.7Sr0.3)0.95MnO3-δ Fabricated by Pulsed Laser Deposition and Its Application as a Solid Oxide Fuel Cell Cathode for Low-Temperature Operation

  • Noh, Ho-Sung (Center for Energy Materials Research, Korea Institute of Science and Technology) ;
  • Son, Ji-Won (Center for Energy Materials Research, Korea Institute of Science and Technology) ;
  • Lee, Heon (Department of Materials Science and Engineering, Korea University) ;
  • Kim, Hae-Ryoung (Center for Energy Materials Research, Korea Institute of Science and Technology) ;
  • Lee, Jong-Ho (Center for Energy Materials Research, Korea Institute of Science and Technology) ;
  • Lee, Hae-Weon (Center for Energy Materials Research, Korea Institute of Science and Technology)
  • 발행 : 2010.01.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The feasibility of using the thin film technology in utilizing lanthanum strontium manganite (LSM) for a solid oxide fuel cell (SOFC) cathode in a low-temperature regime is investigated in this study. Thin film LSM cathodes were fabricated using pulsed laser deposition (PLD) on anode-supported SOFCs with yttria-stabilized zirconia (YSZ) electrolytes. Although cells with a 1 ${\mu}m$-thick LSM cathode showed poor low-temperature cell performance compared to that of a cell with a bulk-processed cathode due to the lack of a triple-phase boundary length, the cell with 200 nm-thick gadolinia-doped ceria (GDC) inserted between the LSM and YSZ showed enhanced performance and more stable operation characteristics in a comparison of a cell without a GDC layer. We postulate that the GDC layer likely improved the cathode adhesion, therefore contributing to the improvement of the cell performance instead of serving as an interfacial reaction buffer.

키워드

참고문헌

  1. S. P. Jiang, “Development of Lanthanum Strontium Manganite Perovskite Cathode Materials of Solid Oxide Fuel Cells: A Review,” J. Mater. Sci., 43 6799-833 (2008). https://doi.org/10.1007/s10853-008-2966-6
  2. F. Tietz, “Thermal Expansion of SOFC Materials,” Ionics, 5 129-39 (1999). https://doi.org/10.1007/BF02375916
  3. E. Koep, C. Jin, M. Haluska, R. Das, R. Narayan, K. Sandhage, R. Snyder, and M. Liu, “Microstructure and Electrochemical Properties of Cathode Materials for SOFC Prepared Via Pulsed Laser Deposition,” J. Power Sources, 161 250-55 (2006). https://doi.org/10.1016/j.jpowsour.2006.03.060
  4. H. Jung, K. Hong, H. Jung, H. Kim, H. Kim, J. Son, J. Kim, H. Lee, and J. Lee, “SOFCs with Sc-Doped Zirconia Electrolyte and Co-Containing Perovskite Cathodes,” J. Electrochem. Soc., 154 [5] B480-85 (2007). https://doi.org/10.1149/1.2712131
  5. C. Peters, A. Weber, and E. Ivers-Tiffee, “Nanoscaled $(La_{0.5}Sr_{0.5})CoO{3-{\delta}$ Thin Film Cathodes for SOFC Application at 500${^{\circ}C}$ < T < 700${^{\circ}C}$,” J. Electrochem. Soc., 155 [7] B730-7 (2008). https://doi.org/10.1149/1.2909552
  6. L. Dieterle, D. Bach, R. Schneider, H. Stormer, D. Gerthsen, U. Guntow, E. Ivers-Tiffee, A. Weber, C. Peters, and H. Yokokawa, “Structural and Chemical Properties of Nanocrystalline $(La_{0.5}Sr_{0.5})CoO{3-{\delta}$ Layers on Yttria-Stabilized Zirconia Analyzed by Transmission Electron Microscopy,” J. Mater. Sci., 43 3135-43 (2008). https://doi.org/10.1007/s10853-008-2502-8
  7. H. Noh, J. Son, H. Lee, H. Song, H. Lee, and J. Lee, “Low-Temperature Performance Improvement of SOFC with Thin Film Electrolyte and Electrodes Fabricated by Pulsed Laser Deposition,” J. Electrochem. Soc., 156 [12] B1484-B90 (2009). https://doi.org/10.1149/1.3243859
  8. S. J. Litzelman, J. L. Hertz, W. Jung, and H. L. Tuller, “Opportunities and Challenges in Materials Development for Thin Film Solid Oxide Fuel Cells,” Fuel cells, 8 294-302 (2008). https://doi.org/10.1002/fuce.200800034
  9. A. Endo, H. Fukunaga, C. Wen, and K. Yamada, “Cathodic Reaction Mechanism of Dense $La_{0.6}Sr_{0.4}CoO_3$ and $La_{0.81} Sr_{0.09}MnO_3$ Electrodes for Solid Oxide Fuel Cells,” Solid State Ionics, 135 353-58 (2000). https://doi.org/10.1016/S0167-2738(00)00466-5
  10. A. Endo, M. Ihara, H. Komiyama, and K. Yamada, “Cathodic Reaction Mechanism for Dense Sr-Doped Lanthanum Manganite Electrodes,” Solid State Ionics, 86-8 1191-95 (1996). https://doi.org/10.1016/0167-2738(96)00286-X
  11. X. Chen, N. J. Wu, D. L. Ritums, and A. Ignatiev, “Pulsed Laser Deposition of Conducting Porous La-Sr-Co-O Films,” Thin Solid Films, 342 61-6 (1999). https://doi.org/10.1016/S0040-6090(98)01347-9
  12. H. Jung, S. Choi, H. Kim, J. Son, J. Kim, H. Lee, and J. Lee, “Fabrication and Performance Evaluation of 3-Cell SOFC Stack Based on Planar 10 cm${\times}$10 cm Anode-Supported Cells,” J. Power Sources, 159 478-83 (2006). https://doi.org/10.1016/j.jpowsour.2005.10.103
  13. H. Jung, Y. Sun, H. Jung, J. Park, H. Kim, G. Kim, H. Lee, and J. Lee, “Investigation of Anode-Supported SOFC with Cobalt-Containing Cathode and GDC Interlayer,” Solid State Ionics, 179 1535-39 (2008). https://doi.org/10.1016/j.ssi.2008.01.063
  14. H. Lim, H. Kim, S. Choi, H. Kim, J. Son, H. Lee, and J. Lee, “Fabrication and Characterization of Composite Sealant for Low Temperature SOFCs(in Korean),” J. Kor. Ceram. Soc., 45 [12] 802-6 (2008). https://doi.org/10.4191/KCERS.2008.45.1.802
  15. A. Infortuna, A. S. Harvey, and L. J. Gauckler, “Microstructures of CGO and YSZ Thin Films by Pulsed Laser Deposition,” Adv. Funct. Mat., 18 [1] 127-35 (2008). https://doi.org/10.1002/adfm.200700136
  16. H. Noh, J. Park, J. Son, H. Lee, J. Lee, and H. Lee, “Physical and Microstructural Properties of NiO- and Ni-YSZ Composite Thin Films Fabricated by Pulsed Laser Deposition at T ${\leq}$ 700${^{\circ}C}$," J. Am. Ceram. Soc., 92 [12] 3069-64 (2009).
  17. J. Son, S. S. Orlov, B. Phillips, and L. Hesselink, “Pulsed Laser Deposition of Single Phase $LiNbO_3$ Thin Film Waveguides,” J. Electroceramics, 17 [2-4] 591-95 (2006). https://doi.org/10.1007/s10832-006-8565-5
  18. M. Ohring, Materials Science of Thin Films, p. 113 and 232. Academic Press, San Diego, 2002.

피인용 문헌

  1. Suppressing Lateral Conduction Loss of Thin-film Cathode by Inserting a Denser Bridging Layer vol.52, pp.5, 2015, https://doi.org/10.4191/kcers.2015.52.5.304
  2. Fabrication of NiO-Y:BaZrO3 Composite Anode for Thin Film-Protonic Ceramic Fuel Cells using Tape-Casting vol.52, pp.5, 2015, https://doi.org/10.4191/kcers.2015.52.5.320