References
- Southwell, R. and Gough, F., 1921, “The Free Transverse Vibration of Airscrew Blades,” British A.R.C. Reports and Memoranda No. 766.
- Schilhansl, M., 1958, “Bending Frequency of a Rotating Cantilever Beam,” J. of Appl. Mech. Trans. Am. Soc. Mech. Engrs, 25, pp. 28-30.
- Putter, S. and Manor, H., 1978, “Natural Frequencies of Radial Rotating Beams,” J. Sound and Vibration, Vol. 56, No. 2, pp. 175-185. https://doi.org/10.1016/S0022-460X(78)80013-3
- Buffinton, K. and Kane, T., 1985, “Dynamics of a Beam Moving Over Supports,” International Journal of Solids and Structures, Vol. 21, No. 7, pp. 617-643. https://doi.org/10.1016/0020-7683(85)90069-1
- Kane, T., Ryan, R. and Banerjee, A., 1987, “Dynamics of Cantilever Beam Attached to a Moving Base,” Journal of Guidance, Control and Dynamics, Vol. 10, No. 2, pp. 139-151. https://doi.org/10.2514/3.20195
- Lai, S., 1994, “Nonlinear Finite Element modeling of a High Speed Rotating Timoshenko Beam Structure,” International Journal of Mechanical Science, Vol. 36, No. 9, pp. 849-861. https://doi.org/10.1016/0020-7403(94)90013-2
- Lee, S. Y. and Kuo, Y. H., 1991, “Elastic Stability of Non-uniform Columns,” Journal of Sound and Vibration, Vol. 148, No. 1, pp. 11-24. https://doi.org/10.1016/0022-460X(91)90818-5
- Rossi, R. E., Laura, P. A. and Gutierrez, R. H., 1990, “A Note on Transverse Vibrations of a Timoshenko Beam of Non-uniform Thickness Clampes at One End and Carrying a Concentrated Mass at the Other,” Journal of Sound and Vibration, Vol. 143, No. 3, pp. 491-502. https://doi.org/10.1016/0022-460X(90)90738-L
- Kane, T. and Levinson, D., 1985, Dynamics : Theory and Applications, McGraw-Hill Book Co., NewYork, N.Y.
- Yoo, H. H., 1991, “A Linear Dynamic Modeling using Hybrid Deformation Variables for Rotating Structures,” J. of KSAS, Vol. 19, No. 3, pp. 32-39.
- Yoo, H. H., 1998, “Vibration Analysis of Rotating Cantilever Beams,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 8, No. 5, pp. 765-774.
- Yoo, H., Ryan, R. and Scott, R., 1995, “Dynamics of flexible Beams Undergoing Over-all Motions,” Journal of Sound and Vibration, Vol. 181, No. 2, pp. 261-278. https://doi.org/10.1006/jsvi.1995.0139
- Carnegie, W. and Thomas, J., 1972, “The Coupled Bending-bending Vibration of Pre-twisted Tapered Blading,” Journal of Engineering for Industry, Vol. 94, pp. 255-266. https://doi.org/10.1115/1.3428120
- Dokumaci, E., Thomas, J. and Carnegie, W., 1967, “Matrix Displacement Analysis of Coupled Bending-bending Vibrations of Pre-twisted Blading,” Journal of mech. Eng. Sci, Vol. 9, pp. 247-51. https://doi.org/10.1243/JMES_JOUR_1967_009_039_02
- Ramamurti, V. and Kielb, R., 1984, “Natural Frequencies of Twisted Rotating Plates,” Journal of Sound and Vibration, Vol. 97, pp. 429-49. https://doi.org/10.1016/0022-460X(84)90271-2
- Leissa, A., 1974, “On a Curve Veering Aberration,” Journal of Applied Mathematics and Physics (ZAMP), Vol. 25, pp. 99-11. https://doi.org/10.1007/BF01602113
Cited by
- Vibration Analysis of Rotating Pre-twisted Inward Beams with a Concentrated Mass vol.25, pp.6, 2015, https://doi.org/10.5050/KSNVE.2015.25.6.384