DOI QR코드

DOI QR Code

A Study on the Frequency Convergence Phenomenon in a Rotating Circular Plate with Slots

슬롯을 갖는 회전 원판의 주파수 수렴 현상에 대한 연구

  • 황성택 (연세대학교 기계공학과) ;
  • 김성진 (서강대학교 대학원 기계공학과) ;
  • 유정훈 (연세대학교 기계공학과) ;
  • 이승엽 (서강대학교 기계공학과)
  • Received : 2010.09.06
  • Accepted : 2010.11.01
  • Published : 2010.12.20

Abstract

A circular plate is the main part of a circular saw blade, which is widely used in industrial cutting tools. In experiments using a circular saw containing slots, we observed that a number of natural frequencies are simultaneously emerged in specific frequency regions. The interesting phenomenon is called the frequency convergence. Effects of design parameters such as the number, the length and the width of slots, on the frequency-convergence phenomenon are analyzed by FEM simulations using ALGOR. The frequency-convergence phenomenon will be intensified when the number, length and width of slots increase.

Keywords

References

  1. Lamb, H. and Southwell, R. V., 1921, “The Vibration of a Spinning Disk,” Proceeding of the Royal Society, Vol. 99, pp. 272-280. https://doi.org/10.1098/rspa.1921.0041
  2. Mote, C. D., 1965, “Free Vibration of Initially Stressed Circular Disks,” ASME Journal of Engineering for Industry, Vol. 87, pp. 285-264.
  3. Eversman, W. and Dodson, R. O., 1969, “Free Vibration of a Centrally Clamped Spinning Circular Disk,” AIAA Journal, Vol. 7, No. 10, pp. 2010-2012. https://doi.org/10.2514/3.5495
  4. Chung, J. T., Kang, N. C. and Lee, J. M., 1996, “A Study on Free Vibration of Spinning Disk,” KSME International Journal, Vol. 10, No. 2, pp. 138-145. https://doi.org/10.1007/BF02953653
  5. Lee, S.-Y., Kim, J.-D. and Kim, S., 2002, “Critical and Flutter Speeds of Optical Disks,” Microsystem Technologies, Vol. 8, pp. 206-211. https://doi.org/10.1007/s00542-001-0147-5
  6. Kim, J. and Lee, S.-Y., 2000, “Vibration Characteristics of a New Optical Disk with Initial Stress,” Transactions of the Korean Society of Mechanical Engineers-A, Vol. 24, No, 10, pp. 2513-2519.
  7. Mote, C. D., 1972, “Stability Control Analysis of Rotating Plates by Finite Element : Emphasis on Slots and Holes,” Transactions of the ASME Journal of Dynamic Systems, Measurement and Control, Vol. 94, pp. 64-70. https://doi.org/10.1115/1.3426545
  8. Nishio, S. and Marui, E., 1996, “Effects of Slots on the Lateral Vibration of a Circular Saw Blade,” International Journal of Machine Tools and Manufacture, Vol. 36, No. 7, pp. 771-787. https://doi.org/10.1016/0890-6955(95)00088-7
  9. Lee, H., 2009, “Modal Vibration Characteristics of an Annular Disk Containing Evenly Spaced Narrow Radial Slots,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 19, No. 6, pp. 560-568. https://doi.org/10.5050/KSNVN.2009.19.6.560