Abstract
The main purpose of this study is to investigate the static behavior of spliced prestressed concrete girder with bending moment connector and lateral prestressing. Four (4) spliced girders and one (1) monolithic girder had been fabricated and tested to compare their static behaviors. Same geometry and materials are used to fabricate these spliced and monolithic girders. A monolithic girder and one (1) spliced girder without lateral bending connector are used as control specimens to estimate the performance of three (3) spliced girders with lateral bending connector. Deflections at the middle of girders have been measured for evaluation. Also, strains of the concrete at the middle of span and connection points have been measured. It was found from the result that laterally strengthened spliced girders showed improved ultimate strength but less stiffness compared to the monolithic girder at the ultimate state. Laterally strengthened spliced girder also showed improved strength as well as improved stiffness compared to the spliced girder without lateral strengthening.
본 연구는 휨연결재와 횡방향 프리스트레스력으로 보강된 분절 PSC(Prestressed Concrete) 거더의 정적거동 성능을 검증하는데 목적이 있다. 정적거동 성능을 검증하기 위하여 4개의 분절거더와 1개의 일체거더를 제작하여 실험하였다. 분절거더와 일체거더는 동일 제원 및 재료를 적용하여 4.8 m 길이로 제작하여 실험하였다. 3개의 횡방향으로 보강된 분절거더의 정적거동 성능을 검증하기 위해 일체거더와 횡방향으로 보강되지 않은 분절거더가 기준이 되는 실험체로 실험을 수행하였다. 거더 중앙 경간에서 처짐을 측정하였으며 중앙 경간과 연결부에서 변형률을 측정하였다. 극한하중상태에서 횡방향으로 보강된 분절거더는 일체거더와 비교하여 극한강도가 동등이상의 성능을 나타내며 강성측면에서는 다소 불리하게 거동함을 알 수 있었다. 하지만, 횡방향으로 보강된 분절거더는 보강되지 않은 분절거더에 비하여 강도 및 강성측면에서 모두 우수한 성능을 나타내었다.