초록
본 연구에서는 투수성 폴리머 콘크리트용 충전재로서 중질탄산칼슘, 고로슬래그미분말 및 플라이 애시를 사용하고 이들 충전재의 종류와 사용량이 투수성 폴리머 콘크리트의 물성에 미치는 영향을 실험을 통해 검토하였다. 실험은 불포화 폴리에스테르 수지를 질량비로 5~7%, 충전재/수지 비를 0~2.0 그리고 나머지는 15 mm 체를 통과하는 굵은 골재로 하여 배합을 정하고 투수성 폴리머 콘크리트의 투수계수, 공극률, 압축강도 및 휨강도 시험을 실시하였다. 실험결과 수지의 사용량 및 충전재/수지 비의 증가에 따라 투수성 폴리머 콘크리트의 투수계수는 감소되고 압축 및 휨강도는 증가하는 경향을 나타냈으며 압축강도 8.0~35.0 MPa과 휨강도 2.0~9.0 MPa의 범위를 나타냈다. 가장 높은 압축강도와 휨강도를 나타낸 것은 불포화 폴리에스테르 수지 사용량 7%, 충전재/수지 비 2.0의 중질탄산칼슘 사용 배합이었다. 한편 압축강도 20 MPa 수준의 투수성 폴리머 콘크리트에서는 충전재로서 플라이 애시를 사용할 때가 가장 경제적인 것으로 나타났다.
This study was performed to determine the effects of filling materials on the physical properties of permeable polymer concrete. The filling materials were ground calcium carbonate, ground granulated blast furnace slag and fly ash. In this experiment, permeable polymer concrete mixtures with unsaturated polyester resin contents from 5 to 7 weight %, filler/resin ratio of 0~2.0 and crushed coarse aggregate passing 15 mm sieve were prepared and coefficient of permeability, void ratio, compressive strength and flexural strength were tested. As the test results, increase in the strength and decrease in the coefficient of permeability of the permeable polymer concrete were generally observed with increasing the resin contents and filler/resin ratio. The compressive and flexural strength of the permeable polymer concrete were in the range of 8.0 to 35.0 MPa and 2.0 to 9.0 MPa respectively and the highest strength was shown at the mixtures with 7 weight % unsaturated polyester resin contents, 2.0 ratio of filler/resin and filler of ground calcium carbonate. On the other hand, in the level of 20 MPa compressive strength, the mixtures with filler of fly ash was shown as the most economic permeable polymer concrete.