한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제20권11호
  • /
  • Pages.1018-1024
  • /
  • 2010
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

프린터 부품 소음원에 따른 감성소음 평가시스템의 개발

Identification of Printer Noise Source and Its Sound Quality Evaluation System Development

  • 투고 : 2010.07.06
  • 심사 : 2010.10.21
  • 발행 : 2010.11.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The printer noise consists of the noise of the various components and parts such as motor, fan and solenoid. And the human's printing sound recognition shows various aspects when the printer starts to print papers because the components operate at the same time. Especially, printers are usually installed in the quiet office room. Therefore the printing noise is related to its competitiveness in the market. The importance of the printer sound qualities is increasing and it is necessary to develop the sound quality evaluation system, so it is a key point to identify the noise source of the printer and develop the sound quality index to each component. By using this evaluation system, it is possible to evaluate the sound quality of a prototype printer compared to the already existing one. In this paper, the printer sound quality evaluation system was developed by the following steps. Firstly, the signal processing method was applied to the recorded printing sound to identity and split the noise of components. Secondly, the MLR(multiple linear regression) method and the psychoacoustics were used to develop the sound quality index. Finally, the improvement of the printer sound quality is possible by using the result of the MLR and the path analysis. The output of this research will be applied to the development of a new printer.

키워드

참고문헌

  1. Baird, T., Bray, W. and Otto, N., 2005 “Impulsive Noise of Printers : Measurement and Characterization,” Inter-Noise 2005, Rio de Janeiro, Brazil.
  2. Cha, D. S., Park, K. J., Kim, K. H. and Choi, M. H., 2007, “Study of Noise and Vibration of the Laser Printer,” Journal of KSNVE, Vol. 17, No. 2, pp. 22-28.
  3. Zwicker, E. and Fastl, H., 1990, “Psychoacoustics, Facts and Models,” 2nd Edition, Springer-Verlag, Berlin.
  4. Zwicker, E. and Fastl, H., 1984, “Basic-program for Calculating the Loudness of Sounds from Their 1/3 Octave Band Spectra According to ISO 532B,” Acustica, Vol. 55, pp. 63-67.
  5. American National Standard Institute, 1997, Methods for the Calculation of the Speech Intelligibility Index., ANSI S3.5-1997.
  6. Oppenheim, V. A. and Schafer, R. W., 1975, “Digital Signal Processing,” Prentice-Hall, Inc.
  7. Park, S. W., Kim, H. W., Na, E. W. and Lee, S. K., 2010, “Sound Metric for the Impact Sound of a Car,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 20, No. 1, pp. 66-73. https://doi.org/10.5050/KSNVE.2010.20.1.066
  8. International Organization for Standardization, 1995, Acoustics - Noise Emitted by Machinery and Equipment, ISO 11201:1995.
  9. Otto, N., Amman, S., Eaton, C. and Lake, S., 2001, “Guidelines for Jury Evaluations of Automotive Sounds,” Journal of Sound and Vibration, Vol. 35, pp. 24-47.
  10. Blauert, J., 2005, “Communication Acoustics,” Springer-Verlag, NewYork.
  11. Hwang, S. W., Kim, H. S., Lee, J. H. and Yun, M. H., 2007, “Development of Luxury Model of Vehicle's Motion Sound Based on Subject Characteristics,” 2007 Fall Conference of Ergonomics Society of Korea, pp. 303-307.

피인용 문헌

  1. Psychoacoustical Study for Sound Quality Index of Steady State Noise of Refrigerators vol.26, pp.5, 2016, https://doi.org/10.5050/KSNVE.2016.26.5.536