Journal of The Korean Society of Agricultural Engineers (한국농공학회논문집)

The Korean Society of Agricultural Engineers (한국농공학회)
권호 표지
DOI QR코드

DOI QR Code

Strength and Durability Properties of Polymer Concrete Utilizing Oyster Shell Powder as a Filler

굴 패각 분말을 충전재로 활용한 폴리머 콘크리트의 강도 및 내구 특성

  • 성찬용 (충남대학교 지역환경토목학과) ;
  • 김영익 (충남대학교 농업과학연구소)
  • Received : 2010.11.11
  • Accepted : 2010.11.19
  • Published : 2010.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study was performed to evaluate the workability, strengths and durability of polymer concrete using oyster shell that are reclaimed at public shore illegally or leaved on the surroundings of shore to prevent the environmental pollution. We investigated the effect of oyster shell powder (OSP) and $CaCO_3$. on the slump, compressive strength, flexural strength, acid sulfuric and freezing and thawing resistance as a filler of polymer concrete. Modified OSP obtained by crushing oyster shell (less than 0.15 mm size) consists of 60.47 wt% of $SiO_2$ and 39.5 wt% of $CaCO_3$. As a result of slump test by OSP and $CaCO_3$. contents, it is found that slump of specimen used OSP is lower than that used $CaCO_3$. and the more OSP contents are, its slump is increased. Compressive and flexural strength of polymer concrete using OSP are similar or slightly lower than that using $CaCO_3$. In acid sulfuric test for 5 % $H_2SO_4$ and freezing thawing test, regardless of kinds of fillers and contents are not found fatal defects in weight change, falling-off in surface and durability factor.

Keywords

References

  1. Jo, B. W., K. C. Shin, and S. K. Park, Strength Characteristics on Sulfuric Acid Corrosion of Recycled PET Polymer Concrete with Different Fillers, Journal of the Korean Concrete Institute 17(4): 499-504 (in Korean). https://doi.org/10.4334/JKCI.2005.17.4.499
  2. Kim, G. J., H. G. Han, D. S. Seo, and J. K. Lee, 2010. Shell Powder Coating on the Surface of Concrete by Geopolymer Cement. Korean Journal of Materials Research 20(1): 1-6 (in Korean). https://doi.org/10.3740/MRSK.2010.20.1.001
  3. Kim, Y. I., and C. Y. Sung, 2009. Strength and Durability Properties Recycled Polymer Concrete Using Unsaturated Polyester Resin and Recycled Aggregates. Journal of the Korea Society of Agricultural Engineers 51(6): 97-103 (in Korean). https://doi.org/10.5389/KSAE.2009.51.6.097
  4. Koo, H. S., 2006. An Experimental Study on the Strength and Properties of Concrete Containing Shells. Environmental Research Institute of Kyungnam University 29: 21-33 (in Korean).
  5. Kim. N. K., 2004. Flexural Behaviors of Steel and GFRP Reinforced Polymer Concrete T-Beam. Thesis for Doctor Degree, Kangwon National University (in Korean).
  6. Lee. M. H., J. C. Yi, S. W. Lee, J. L. Soh, and S. H. Park, 2004. Development of Traffic Safety Facilities Using Polymer Concrete Composites. Journal of Advanced Mineral Aggregate Composites 9: 119-124 (in Korean).
  7. Lee, I. G., 2000. A Study on the Environment of Waste Shell and Its Recycling Method. Journal of the Korean Association of Crystal Growth 10(2): 159-165 (in Korean).
  8. Ministry for Food. Agriculture, Forestry and Fisheries, 2009 (in Korean).
  9. Ohama, Y. and K. Demura, 1979. Effect of Coarse Aggregate on Compressive Strength of Polyester Resin Concrete. The International Journal of Cement Composites 1(3): 111-119.
  10. Shin, C. H., 2006. Manufacture of Sterilizing Media with Shell Powder and It's Application to the Filter of Water Clarifier. Journal of the Environmental Sciences 15(11): 1,027-1,034 (in Korean). https://doi.org/10.5322/JES.2006.15.11.1027
  11. Sakai, K., N. Banthia and O. E. Gjorv. 1995. Concrete under Severe Conditions (environment and loading), E & FN Spon: 1,675-1,683.
  12. Sandberg, P., 1995. Resistance of Non-Air-Entrained RHA Concrete to Freezing and Thawing in Saline Environment, Fifth CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete, Milwaukee, WI.
  13. Son, J. K., and G. M. Park, 1995. A Scanning Electron Microscopic Study of the Shells of Unionidae (Bivalvia). Korean Journal of Malacol 11(1): 70-77 (in Korean).
  14. Yeon, K. S., J. M. Beck, X. Q. Jin, and C. W. Lee, 2005. Effect of Filler and SShrinkage Reducing Agent Influencing on Setting Shrinkage and Strength Properties of MMA-Modified Polymer Paste. Journal of the Koran Concrete Institute 18(20): 227-232. https://doi.org/10.4334/JKCI.2006.18.2.227
  15. Yeon, K. S., K. H. Kim, P. H. Lee, D. S. Kim, and Y. J. Park, 1994. Mechanical Properties of High Strength Polymer Concrete Using Unsaturated Polymer Resin, Journal of the Koran Concrete Institute 6(3): 131-140.