References
- Ahn, H. T., Jang, G. H., Chang, J. H., Jeong, S. W. and Kang, D. H., 2008, “Reduction of the Torque ripple and Magnetic Force of a Rotatory two-phase Transverse Flux Machine Using Herringbone Teeth,” IEEE Trans. Magn., Vol. 44, No.11, pp. 4066-4069 https://doi.org/10.1109/TMAG.2008.2001586
- Kang, D. H. and Jeong, Y. H., 2001, “A Study on the Design of Transverse Flux Linear Motor with High Power Density,” IEEE International Symposium on Industrial Electronics(ISIE), Vol. 2, pp. 707-711 https://doi.org/10.1109/ISIE.2001.931552
- Jang, G. H., Park, N. K., Lee, C. I., Chang, J. H., Jeong, S. W. and Kang, D. H., 2008, “Reduction of the Unbalanced Magnetic Force of a Transverse Flux Machine by Using Symmetric Multi-pair Cores,” Journal of Applied Physics, Vol. 103, pp. 07F104-1-07F104-3 https://doi.org/10.1063/1.2830636
- Erich Schmit, 2005, “3D Finite Element Analysis of the Cogging Torque of a Transverse Flux Machine,” IEEE Trans. Magn., Vol. 41, No. 5, pp. 1836-1839 https://doi.org/10.1109/TMAG.2005.846465
- Maddison, C. P., Mecrow, B. C. and Jack, A. G, 1998, “Claw Pole Geometries for High Performance Transverse Flux Machines,” Proceedings of International Conference on Electrical Machines, Vol. 1, pp. 340-345
- Masmoudi, A., Njeh, A. and Elantably, A., 2005, “On the Analysis and Reduction of the Cogging Torque of a Claw Pole Transverse Flux Permanent Magnet Machine,” European Transactions on Electrical Power, Vol. 15, pp. 513-526 https://doi.org/10.1002/etep.100
- Lee, J. H., Lee, S. W. and Park, K. W., 2005, “Global Shape Optimization of Airfoil Using Multi-objective Genetic Algorithm,” Trans. of the KSME (B), Vol. 29, No.10, pp.1163-1171 https://doi.org/10.3795/KSME-B.2005.29.10.1163