International Journal of Contents

The Korea Contents Association (한국콘텐츠학회)
권호 표지
DOI QR코드

DOI QR Code

Utilizing 3D Laser Scanning Technology for Remodeling Work of Building Inside

  • Lee, Jin-Duk (School of Civil and Environmental Engineering Kumoh National Institute of Technology) ;
  • Han, Seung-Hee (Department of Civil Engineering Kongju National University) ;
  • Lee, Jae-Bin (Dongsan Survey ENC)
  • Published : 2009.09.28
Download PDF
⟨ Previous Next ⟩

Abstract

Laser scanning technology is a maturing measurement technology which is capable of obtaining 3D measurement data of objects with high-accuracy, high-resolution and in a short time. Laser scanners are used more and more as surveying instruments for various applications. This paper describes the procedure of 3D data acquirement using terrestrial LiDAR and section drawing extraction through a series of processing for remodeling the interior of a department building. Accurate drawings are needed for improvement construction of building interior. However if the design drawings of that time of construction work were lost or damaged or actual dimensions of drawings differ from those of design drawings, the interior should be resurveyed. In this study, the extraction process of interior plane figures were suggested through using laser scanning and related reverse engineering software

Keywords

References

  1. S.H. Lee, Y.C. Hwang, S.H. Kim, S.R. Sim, and T.Y. Jeong, "A Study on Precision Measurement of Rock Joint Using 3D Laser Scanner", Explosives & Blasting, Korean Society of Explosives & Blasting Engineering, Vol.22, No.3, 2004, pp. 103-111.
  2. I.S. Lee, D.K. Tcha, and S.J. Kim, "Cadastral Reconnaissance Surveying in Land Consolidation Area Using Terrestrial Laser Scanner", The Journal of KSCE(D), Korean Society of Civil Engineers, Vol.27, No.2, 2007, pp. 233-239.
  3. H.S. Han, H.G. Sohn, and J.S. Kim, and S.K. Woo, "Examination of Construction Site Using 3D Laser Scanner", Joint Conference of Korean GIS Societies, June, 2008, pp. 525-528.
  4. J.D. Lee, C.H. Do, and S.H. Han, "3 Dimensional Modelling of a Old Architecture Using a Terrestrial Laser Scanner", 2007 Fall Conference of Korea Contents Association, The Korea Contents AssociationVol.5, No.2(1), 2007, pp. 30-34
  5. J.C. Lee, Y.H. Lee, D.Y. Moon and D.J..Seo, "Extraction of Coastal Topography Using Terrestrial Laser Scanning Technique", Proceeding of Korean Society of Surveying, Geodesy, Photogrammetry, and Cartograph, Jeju, Korea, 2007, pp. 435-438
  6. A. Brzank, P. Lohmann, C. Hejpke "Automated Extraction of Pair Wise Structure Lines Using Airborne Laser Scanner Data in Coastal Areas,", Congress of ISPRS, WG III/3, III/4, Netherlands, September, 2005.
  7. Frohlich, C.; Mettenleiter, M., "Terrestrial Laser Scanning - New Perspectives in 3D Surveying", International Archives of Photogrammetry, Remote Sensing, Spatial Information Science, Vol.XXXVI-8/W2.
  8. http://www.slope.co.kr/image/scanner3dsd.pdf.
  9. http://www.rapidform.com/index.htm.