References
- The Korean Welding and Joining Society, 1998, Welding.Joining Handbook, Republic of Korea, pp. 706-716.
- Kim, J. O., Jung, S. W., and Park, D. H., 1992, "A Study on the Gas Cutting and Cutting Quality," Technical Hyundai, Hyundai Heavy Industries Co., Vol. 12, No. 3, pp. 65-74.
- The Society of Naval Architects of Korea, 1998, "Shipbuilding Engineering," dong myeong sa, pp. 140-149.
- Lho, T. J. and Na, S. J., 1987, "Arc Efficiency and Kerf Width in Plasma Arc Cutting Process," Journal of the Korean Welding Society, Vol. 5, No. 1, pp. 23-33.
- Um, K. W. and Kim, D. J., 1991, "A Study on the Plasma Arc Cutting Phenomena of Plate Materials," Journal of the Korean Welding Society, Vol. 9, No. 4, pp. 69-74.
- TRUMPF, 1999, "Technical information Laser processing," pp. 2-4-2-5.
- Ahn, D. G., Byun, K. W., and Yoo, Y. T., 2007, "Investigation into the Formation of the Cut Section for the Case of Cutting of Inconel 718 Sheet using CW Nd:YAG laser," Proceedings of the KSMTE spring conference 2007, pp. 113-118.
- Ahn, D. G. and Byun, K. W., 2008, "Investigation of Cutting Characteristics in the Sharp Corner for the Case of Cutting of Inconel 718 Super-alloy Sheet using High-power CW Nd:YAG Laser," Journal of KWJS, Vol. 26, No. 5, October, pp. 90-96.
- Lee, K. H. and Kim, K. C., 1996, "Process Optimization for the Laser Cutting of Cold Rolled STS Sheet," Journal of KWS, Vol. 14, No. 5, October, pp. 59-68.
- Kim, H. K., Yang, K. T., and Kim, H. J., 2007, "Fatigue Crack Propagation Behavior of Fine Grained Al-5083 Alloy Produced by Severe Plastic Deformation," Journal of the KOSOS, Vol. 22, No. 2, pp. 15-21.
- Han, M. S., Ko, S. C., Kim, S. H. Jang, S. K., and Kim, S. J., 2008, "Optimization of Corrosion Protection Potential for Stress Corrosion Cracking and Hydrogen Embrittlement of 5083-H112 Alloy in Seawater," METALS AND METERIALS International, Vol. 14, No. 2, pp. 203-211.
- Kim, S. I., 2003, "A Study on the Cutting Surface Characteristics in CNC Gas Cutting of plate steel," Transactions of the Korean Society of Machine Tool Engineers, Vol. 12, No. 1, pp. 24-31.
- Kim, I. C. and Kim, S. I., 2003, "A Study on the Cutting Surfaces in CNC Plasma Cutting of high tensile steel plate," Proceedings of the KSMTE spring conference, pp. 149-154.