References
- Budinski, K. G., 1988, Surface Engineering for Wear Resistance, Prentice Hall, U. S. A., pp. 242-287.
- American Society for Metals, 1983, Metals Handbook, ASM, U. S. A., pp. 771-803.
- Henderson, J. L., Bulloch, J. H., 1991, "Alloy Classification of Hardfacing Materials," Int. J. Press Ves. And Piping, Vol. 44, pp. 127-158.
- Baek, E. R., 1998, "Effect of Volume Fraction of Cr Carbide Phase on the Abrasive Wear Behavior of the High Cr White Iron Hardfacing Weld Deposite," Journal of KWS, Vol. 16, No. 1, pp. 74-82.
- Kim, D. R., 1994, The cutting theory and example, Gijeon, Republic of Korea.
- Jeon, J. Y., Ko T. J., Kim, H. S., 1999, "Research on the Intermittent Hard Turning(1): Machinability and Characteristic of CBN Tools," Journal of the Korean Society of Precision Engineering, Vol. 16, No. 7, pp. 58-65.
- Tonshoff, H. K., 1995, "Hard turning influences on the workpiece properties," Transactions of NAMRI/SME, Vol. 23, pp. 215-220.
- Meodows, D. H., 1997, "Boring of lazer hardened bushings," 2nd International Machining & Grinding conference, pp. 511-520.
- Fukaya, T., 1997, "High efficiency machining with new CBN cutting tools," 2nd International Machining & Grinding conference, pp. 361-371.
- Mun, S. D. and Kim, T. Y., 2001, "Influence of CBN Tool Geometry on Cutting Characteristics of High Hardened Steel," Transactions of the Korean Society of Machine Tool Engineers, Vol. 10, No. 5, pp. 84-91.
- Kim, M. H., 2009, "A Study on Vision Measurement System and Dynamic Signal Analysis for Improving Hole Accuracy in Drilling," A Thesis for a Doctorate, Chonbuk National University, Republic of Korea.