참고문헌
- R. J. Arsenault, N. Shi, 1986, Dislocation Generation due to Differences between the Coefficients of Thermal Expansion, Mater. Sci. Eng. A, Vol. 81, pp. 175-187 https://doi.org/10.1016/0025-5416(86)90261-2
- D. J. Lloyd, 1994, Particle Reinforced Aluminum and Magnesium Matrix Composites, Int. Mater. Rev., Vol. 39, No.1, pp. 1-23 https://doi.org/10.1179/imr.1994.39.1.1
- M. Vogelsang, R. J. Arsenault, R. M. Fisher, 1986, An In Situ HVEM Study of Dislocation Generation at AI/SiC Interfaces in Metal Matrix Composites, Metall. Trans. A, Vol. 17, No. 3, pp. 379-389 https://doi.org/10.1007/BF02643944
- M. F. Ashby, 1970, The Deformation of Plastically Non-homogeneous Materials, Philos. Mag., Vol. 21, No. 170, pp. 399-424 https://doi.org/10.1080/14786437008238426
- N. A. Fleck, J. W. Hutchinson, 1993, A Phenomenological Theory for Strain Gradient Effects in Plasticity, J. Mech. Phys. Solids, Vol. 41, No. 12, pp. 1825-1857 https://doi.org/10.1016/0022-5096(93)90072-N
- N. A. Fleck, G. M. Muller, M. F. Ashby, J. W. Hutchinson, 1994, Strain Gradient Plasticity Theory and Experiment, Acta Metall. Mater., Vol. 42, No.2, pp. 475-487 https://doi.org/10.1016/0956-7151(94)90502-9
- S. H. Kim, H. Huh, H. T. Hahn, 2005, The Size Effect in Particulate Composite Materials-SizeDependent Plasticity, Proc. Kor. Soc. Tech. Plast. Conf., Jinju, Korea, p. 167
- Y. S. Suh, S. P. Joshi, K. T. Ramesh, 2009, Continuum Microstructural Modeling of the Length-Scale Dependent Strengthening and Failure in Particle Reinforced Composites, Acta Metall. Mater., doi: 10.1016/j.actamat.2009.08.010
- S. Shibata, M. Taya, T. Mori, T. Mura, 1992, Dislocation Punching from Spherical Inclusions in a Metal Matrix Composite, Acta Metall. Mater., Vol. 40, No. 11, pp. 3141-3148 https://doi.org/10.1016/0956-7151(92)90477-V
- DSSC, 1998, ABAQUS User's manual, Hibbit, Karlsson & Sorensen, inc., New York, USA
- M. Taya, K. E. Lulay, D. J. Lloyd, 1991, Strengthening of a Particulate Metal Matrix Composite by Quenching, Acta Metall. Mater., Vol. 39, No.1, pp. 73-87 https://doi.org/10.1016/0956-7151(91)90329-Y
- K. Tanaka, K. Narita, T. Mori, 1972, Work Hardening of Materials with Strong Inclusions after Prismatic Punching, Acta Metall., Vol. 20, No. 3, pp. 297-304 https://doi.org/10.1016/0001-6160(72)90021-1
- J. D. Eshelby, 1959, The Elastic Field Outside an Ellipsoidal Inclusion, Proc. R. Soc. London, Ser. A, Vol. A252, pp. 561-569
- N. Hansen, 1977, The Effect of Grain Size and Strain on the Tensile Stress of Aluminium at Room Temperature, Acta Metall., Vol. 25, No.8, 1977, pp. 863-869 https://doi.org/10.1016/0001-6160(77)90171-7
- R. J. Arsenault, L. Wang, C. R. Feng, 1991, Strengthening of Composites due to Microstructural Changes in the Matrix, Acta Metall. Mater., Vol. 39, No.1, pp. 47-57 https://doi.org/10.1016/0956-7151(91)90327-W
- S. Qu, T. Siegmund, Y. Huang, P. D. Wu, F. Zhang, K. C. Hwang, 2005, A Study of Particle Size Effect and Interface Fracture in Aluminum Alloy Composite via an Extended Conventional Theory of Mechanism-based Strain-Gradient Plasticity, Compos. Sci. Technol., Vol. 65, No. 7-8, pp. 1244-1253 https://doi.org/10.1016/j.compscitech.2004.12.029
- D. L. McDanels, 1985, Analysis of Stress-Strain, Fracture, and Ductility Behavior of Aluminum Matrix Composites Containing Discontinuous Silicon Carbide Reinforcement, Metall. Mater. Trans. A, Vol. 16, No.6, pp, 1105-1115 https://doi.org/10.1007/BF02811679
피인용 문헌
- Hierarchical Finite-Element Modeling of SiCp/Al2124-T4 Composites with Dislocation Plasticity and Size-Dependent Failure vol.36, pp.2, 2012, https://doi.org/10.3795/KSME-A.2012.36.2.187
- Numerical Assessment of Dislocation-Punching Theories for Continuum Structural Analysis of Particle-Reinforced Metal Matrix Composites vol.35, pp.3, 2011, https://doi.org/10.3795/KSME-A.2011.35.3.273
- Modeling of Size-Dependent Strengthening in Particle-Reinforced Aluminum Composites with Strain Gradient Plasticity vol.35, pp.7, 2011, https://doi.org/10.3795/KSME-A.2011.35.7.745