참고문헌
-
Jackson, B. W. and Troupe, R. A., 1966, 'Plate Heat Exchanger Design by
$\epsilon$ -NTU Method', Chemical Engineering Progress Symposium Series, No. 64, Vol. 623, pp. 185-190 - Smith, V. C. and Troupe, R. A., 1965, "Pressure Drop Studies in a Plate Heat Exchanger", A.I.Ch.E. Journal, Vol. 11, No. 3, pp. 487-491 https://doi.org/10.1002/aic.690110323
- Marriott, J., 1971, 'Where and How to Use Plate Heat Exchangers', Chemical Engineering, Vol. 78, No. 8, pp. 127-134
- Edwards, M. F., 1974, 'Heat Transfer and Pressure Drop Characteristics of a Plate Heat Exchanger Using Newtonian and Non-Newtonian Liquids', The Chemical Engineer, Vol. 259, No. 1, pp. 286-288
- Cooper, A., 1974, 'Recover More Heat With Plate Heat Exchangers', The Chemical Engineer, Vol, 259, No. 1, pp. 280-285
- Raju, K. S. N. and Bansal, J. C., 1982, 'Design of Plate Heat Exchanger', pp. 913-914
- Edwards, M. F., 1982, 'Heat Transfer in Plate Heat Exchangers at Low Reynolds Numbers', pp. 933-947
- Focke, W. W., Zachariades, J. and Oliver, I., 1985, 'The Effect of the Corrugation Inclination Angle on the Thermohydraulic Performance of Plate Heat Exchangers', Int. J. Heat Mass Transfer, Vol. 28, No. 8, pp. 1469-1479 https://doi.org/10.1016/0017-9310(85)90249-2
- Focke, W. W., 1986, 'Selecting Optimum Plate Heat Exchanger Surface Patterns', Journal of Heat Transfer February 1986, Vol. 108, pp. 153-160 https://doi.org/10.1115/1.3246880
피인용 문헌
- Study on Design Factor and Design-code Development for Plate Type Heat Exchangers vol.36, pp.8, 2012, https://doi.org/10.5916/jkosme.2012.36.8.1003
- Measurement of pressure distribution inside a cross-corrugated heat exchanger using microchannel pressure tappings vol.24, pp.3, 2013, https://doi.org/10.1088/0957-0233/24/3/035306
- 유압벌지실험을 이용한 순 티탄늄 판재의 소성유동곡선 평가(제2보) vol.17, pp.4, 2009, https://doi.org/10.5762/kais.2016.17.4.718