Progress in Superconductivity and Cryogenics (한국초전도ㆍ저온공학회논문지)

The Korean Society of Superconductivity and Cryogenics (한국초전도저온학회)
권호 표지
DOI QR코드

DOI QR Code

Quench/recovery test results of the YBCO coated conductors(CCs) having various stabilizer thicknesses

YBCO coated conductors(CCs)의 안정화재 두께 변화에 따른 quench/recovery 특성 분석에 관한 연구

  • 권나영 (고려대학교 신소재공학과) ;
  • 김현성 (고려대학교 신소재공학과) ;
  • 김광록 (고려대학교 신소재공학과) ;
  • 김경준 (고려대학교 신소재공학과) ;
  • 임성우 (한전전력연구원 송배전연구소) ;
  • 김혜림 (한전전력연구원 송배전연구소) ;
  • 현옥배 (한전전력연구원 송배전연구소) ;
  • 이해근 (고려대학교 신소재공학과)
  • Published : 2009.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Since a stabilizer of YBCO coated conductor (CC) plays a very important role of bypassing over-current and transferring heat generated in the moment of fault, it is one of big issues to determine the material of the stabilizer and its dimension for the high performance of the HTS power application system. Especially, in the case of a superconducting fault current limiter (SFCL), which requires it to react immediately to the occurrence of fault, characteristics of stabilizer are decisive in limiting fault current and recovering superconducting properties during and after quenching. In this paper, the quench / recovery characteristics of YBCO CCs with various thickness of stabilizer were analyzed. The quench/recovery test carried out at 20 $V_{rms}$, 5 cycles (60 Hz) and results showed that as the thickness of the stabilizer decreased, both the final approach temperature and the recovery time decreased.

Keywords

References

  1. O. B. Hyun, H. R. Kim, Y. S. Yim, J. Sim, K. B. Park and I. S. Oh, "Domestic Effects for SFCL Application and Hybrid SFCL", 한국초전도학회, Vol. 10 No. 1, pp. 60-67, 2008
  2. 안민철, 석복렬, 고태국, "초전도한류기에 적용하는 YBCO 박막형 선재의 반복적 과전류 특성", 한국초전도.저온공학회논문지, 9권 3호, pp. 26-31, 2007
  3. D. K. Park, M. C. Ahn, S. E. Yang, Y. S. Yoon, B. Y. Seok, C. Lee, H. M. Chang and T. K. Ko, "Development of 220 V/300A class non-inductive winding type fault current limiter using 20G HTS wire," IEEE Transactions on Applied Superconductivity, Vol. 17, No. 2, pp. 1855-1858, 2007 https://doi.org/10.1109/TASC.2007.897756
  4. M. C, Ahn, D. K. Bae, S. E. Yang, D. K, Park, T. K. Ko, C. Lee, B. Y. Seok and H. M. Chang "Manufacture and test of small-scale superconducting fault current limiter by using the bifilar winding of coated conductor ," IEEE Transactions on Applied Superconductivity, Vol. 16, No. 2, pp. 646-649, 2006 https://doi.org/10.1109/TASC.2006.870522
  5. 나진배, 안민철, 김민재, 김영재, 양성은, 박동근, 김호민, 석복렬, 고태국 "스테인리스 스틸 안정화재를 가진 coated conductor의 적층 유무에 따른 효과적인 사고전류 제한을 위한 연구", 한국초전도.저온공학회논문지, 9권 1호, pp. 9-13, 2007
  6. 김혜림, 이승엽, 차상도, 최효상, 현옥배 "션트박막두께에 따른 박막형 초전도 한류소자의 퀜치특성", 한국초전도.저온공학회논문지, pp. 51-54, 2003
  7. 심정욱, 현옥배, 박권배, 임성우, 김혜림, 이방욱, 오일성 "전력용 반도체 소자를 적용한 하이브리드 초전도 한류기 동작 신뢰도 향상", 한국초전도.저온공학회논문지, 9권 3호, pp. 57-61, 2007
  8. H. S. Kim, N. Y. Kwon, K. S. Chang, T. K. Ko, H. M. Kim, W. S. Kim, C. Park and H. G. Lee "Joint Characteristics of the YBCO Coated Conductor (CC) by Chemical Etching ," IEEE Transactions on Applied Superconductivity, Vol. 19, No. 3, pp. 2835-2838, 2009 https://doi.org/10.1109/TASC.2009.2018854
  9. N. Y. Kwon, H. S. Kim, K. L. Kim, S. W. Yim, H. R. Kim, O. B. Hyun, H. M. Kim and H. G. Lee "Influence of stabilizer thickness on over-current test of YBCO-coated conductors," Superconductor Science and Technology, 22, pp. 045003, 2009 https://doi.org/10.1088/0953-2048/22/4/045003
  10. 김혜림, 최효상, 임해용, 김인선, 현옥배 "Au/YBCO 박막 meander line의 퀜치회복에 대한 분석", 한국초전도.저온공학회 학술대회 논문집, pp. 92-94, 2001