Composites Research

  • 제22권4호
  • /
  • Pages.41-49
  • /
  • 2009
  • /
  • 2288-2103(pISSN)
  • /
  • 2288-2111(eISSN)
한국복합재료학회 (The Korean Society for Composite Materials)
권호 표지
DOI QR코드

DOI QR Code

천연섬유보강 복합재료의 최근 연구 개발

Recent Developments in Natural Fiber Reinforced Composites

  • Mirza, Foisal Ahmed (Dept. of Mechanical Engineering, Changwon National University) ;
  • Afsar, Ali Md. (Dept. of Mechanical Engineering, Changwon National University) ;
  • Kim, Byung-Sun (Composite Materials Lab, Korea Institute of Materials Science (KIMS)) ;
  • Song, Jong-Il (Dept. of Mechanical Engineering, Changwon National University)
  • 발행 : 2009.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

천연섬유복합재료는 저비용, 경량, 재생성, 친환경적인 재료로 최근 제조되고 있다. 또한 이들 재료는 생체분해성과 비연마 특성을 갖고 있다. 천연섬유의 친환경적이고 생체분해성으로 인해 천연섬유복합재료는 기존의 섬유를 대체할 잠재적인 대체재로 관심을 받고 있다. 천연섬유의 화학적, 기계적, 물리적 특성은 다양한 섬유의 셀룰로스양에 따라 명확한 특정이 구분되며, 이러한 복합재료의 기계적인 물성치는 기지재와 섬유간의 접착에 의해 주로 영향을 받고 있다. 천연섬유표면의 여러 화학적인 물리적인 개질방법은 섬유와 기지의 접착력 향상에 영향을 주어 결국 복합재료의 기계적인 물성치를 향상시킬 수 있다. 본 논문은 최근 개발되고 있는 천연섬유복합재료의 섬유종류, 고분자기지, 제조기술, 섬유의 처리, 섬유 기지간 계면등에 관한 최근의 연구결과들을 정리하여 소개한 것이다.

Natural fiber reinforced composites are emerging as low-cost, lightweight, recyclable, and eco-friendly materials. These are biodegradable and non-abrasive. Due to eco-friendly and biodegradable characteristics of natural fibers, they are being considered as potential candidates to replace the conventional fibers. The chemical, mechanical, and physical properties of natural fibers have distinct features depending upon the cellulose content of the fibers which varies from fiber to fiber. The mechanical properties of composites are influenced mainly by the adhesion between matrix and fibers. Several chemical and physical modification methods of fiber surface were incorporated to improve the tiber-matrix adhesion resulting in the enhancement of mechanical properties of the composites. This paper outlines the works reported on natural tiber reinforced composites with special reference to the type of fibers, polymer matrix, processing techniques, treatment of fibers, and fiber-matrix interface.

키워드

참고문헌

  1. Khondker O. A., lshiaku U. S., Nakai A., and Hamada H., "A Novel Processing Technique for Thermoplastic Manufacturing of Unidirectional Composites Reinforced with Jute Yarns," Composites: Part A, Vol. 37, No. 12, 2006, pp. 2274-2284 https://doi.org/10.1016/j.compositesa.2005.12.030
  2. Ana E., FranciscoV., and Karlsson S., "Comparison of Water Absorption in Natural Cellulosic Fibres from Wood and One-year Crops in Polypropylene Composites and Its lnfluence on Their Mechanical Properties," Composites: Part A, Vol. 35, 2004, pp. 1267-1276 https://doi.org/10.1016/j.compositesa.2004.04.004
  3. Goda K., and Cao. Y., "Research and Development of Fully Green Composites Reinforced with Natural Finers," Journal of Solid Mechanics and Materials Engineering Vol.1, No. 9, 2007, pp. 1073-1084 https://doi.org/10.1299/jmmp.1.1073
  4. Lee S. H., Wang S., George M. P., and Xu H., "Evaluation of lnter phase Properties in a Cellulose Fiber-reinforced Polypropylene Composite by Nanoindentation and Finite Element Analysis," Composites: Part A, Vol. 38, No. 6, 2007, pp. 1517-1524 https://doi.org/10.1016/j.compositesa.2007.01.007
  5. Ganster J., Fink H. P., and Pinnow M., "High-tenacity Man-made Cellulose Fibre Reinforced Thermoplastics Injection Moulding Compounds with Polypropylene and Alternative Matrices," Composites: Part A, Vol. 37, 2006, pp. 1796-1804 https://doi.org/10.1016/j.compositesa.2005.09.005
  6. Yang H. S., Michael P. W., Kim H. S., KimS., and Kim H. J., "Properties of Lignocellulosic Material FiIIed Polyprootkebe Biocomposites Made with Different Manufacturing Processes," Polymer Testing, 25, 2006, pp. 668-676 https://doi.org/10.1016/j.polymertesting.2006.03.013
  7. Abdelmouleh M., Boufi S., Belgacem M. N., and Dufresne A., "Short Natural-fibre Reinforced Polyethylene and Natural Rubber Composites: Effect of Silane Coupling Agents and Fibres Loading," Composites Science and Technology, Vol. 67, 2007, pp. 1627-1639 https://doi.org/10.1016/j.compscitech.2006.07.003
  8. Wulin Q., Takashi E., and Takahiro H., "S tructure and Properties of Composites of Highly Crystalline Cellulose with Polypropylene: Effects of Polypropylene Molecular Weight," European Polymer Journal, Vol. 42, 2006, pp 1059-1068 https://doi.org/10.1016/j.eurpolymj.2005.11.012
  9. Bledzki A. K., and Faruk O., "lnjection Moulded Microcellular Wood Fibre-Polypropylene Composites," Composites: Part A, Vol. 37, 2006, pp. 1358- 1367 https://doi.org/10.1016/j.compositesa.2005.08.010
  10. PracellaM., Chionna D., Anguillesi I., Kulinski Z., and Piorkowska E., "Functionalization, Compatibilization and Properties of Polypropylene Composites with Hemp Fibres," Composites Science and Technology, Vol. 66, 2006, pp 2218-2230 https://doi.org/10.1016/j.compscitech.2005.12.006
  11. Pickering K. L., Beckermann G. W., AIam S. N., and Foreman N. J., "Optimising lndustrial Hemp Fibre for Composites," Composites: Part A, Vol. 38, 2007, pp. 461-468 https://doi.org/10.1016/j.compositesa.2006.02.020
  12. Takumi M., and Goichi B., "Development of Pultrusion Method for Fabricating Kenaf Fiber Bundles with PLA or PBS Resin," Proceedings of the Fifth International Workshop on Green Composites, IWGC-5, 2008, pp17-22
  13. Doan T. T. L., Gao S. L., and Mader E., "Jute/Polypropylene Composites, I. Effect of Matrix Modification," Composites Science and Technology, Vol. 66, 2006, pp. 952-963 https://doi.org/10.1016/j.compscitech.2005.08.009
  14. Girones J., Mendez J. A., Boufi S., Vilaseca F., and Mutje P., "Effect of Silane Coupling Agents on the Properies of Pine Fibres/Polypropylene Composites," Journal of Applied Polymer Science， Vol. 103, 2007, pp. 3706-3717 https://doi.org/10.1002/app.25104
  15. Yang H. S., Kim H. J., Park H. J, Lee B. J., and Hwang T. S., "Effect of Compatibilizing Agents on Rice-husk FIour Reinforced Polypropylene Compositcs," Composite Structures, Vol. 77, 2007, pp. 45-55 https://doi.org/10.1016/j.compstruct.2005.06.005
  16. Kim H. S., Kím S., Kim H. J., and Yang H. S., "Thermal Properties of Bio-flourfilled PolyoJefin Composites with Different Compatibilizing Agent Type and Content," Thermochimica Acta, Vol. 451 , 2006, pp. 181-188 https://doi.org/10.1016/j.tca.2006.09.013
  17. Panthapulakkal S., Zereshkian A. and Sain M., "Preparation and Characterization of Wheat Straw Fibres for Reinforcing Applícation in lnjection Molded Thermoplastic Composites," Bioresource Technology， Vol. 97, 2006, pp. 265-272 https://doi.org/10.1016/j.biortech.2005.02.043
  18. Joseph P. V., Joseph K., Thonas S., Pillai C. K. S., Prasad V. S., Groeninckx G., and Sarkissova M., "The Thermal and Crystallisation Studies of Short Sisal Fibre Reinforced Polypropylene Composites," Composites: Part A, Vol 34, 2003, pp. 253-266 https://doi.org/10.1016/S1359-835X(02)00185-9
  19. Kazuto T., Yuki M., and Tsutao K., "Mechanical Properles of Jute Fabric Reinforced PLA Nonwoven Sheet Composite," Proceedings of the Fifth lntemational Workshop on Green Composites, lWGC-5, 2008, pp. 37-41
  20. Yoldas S., "Innovative multifunctional siloxane treatment of jute fiber surface and its effect on the mechanical properties of jutelthenlloset composiltes," Materials Science and Engineering A, Vol. 508, 2009, pp. 247-252 https://doi.org/10.1016/j.msea.2009.01.043
  21. Athijayamani A., Thiruchitrambalam M., Natarajan U., And Pazhanivel B., "Effect of moisture absorption on the mechanical properties of madomly oriented naural fibers/polyesters hybrid composite," Materials Science and Engineering， 2009, in press
  22. Liu L., Yu J., Cheng L., and Qu W., "Mechanical propoerties of poly (butylcne succinateA) (PBS) bioeomposites rcinforced wìth surface modified jute fibre," Composites: Part A, Vol 40, 2009, pp. 669-674 https://doi.org/10.1016/j.compositesa.2009.03.002
  23. Wang W. and Huang G., "Characterisation and utilization of natura1 eoconut fíbres composiles," Materials and Design, Vol. 30, 2009, pp. 2741-2744 https://doi.org/10.1016/j.matdes.2008.11.002
  24. Kasama J., and Nitinat S., "Effects of glass fiber hybridization on properties of sisal fiber-polypropylene composítes," Composites: Part B, 2009, Article in press https://doi.org/10.1016/j.compositesb.2009.04.007
  25. Mubarak A. K., Johannes G., and Fink H. P., "Hybrid composites of jute and man-made cellulose fibers with polypropylene by injection moulding," Composites: PartA, 2009, in press https://doi.org/10.1016/j.compositesa.2009.04.015