DOI QR코드

DOI QR Code

INTEGRAL EFFECT TESTS IN THE PKL FACILITY WITH INTERNATIONAL PARTICIPATION

  • Published : 2009.08.31

Abstract

For over 30 years, investigations of the thermohydraulic behavior of pressurized-water reactors under accident conditions have been carried out in the PKL test facility at AREVA NP in Erlangen, Germany. The PKL facility models the entire primary side and significant parts of the secondary side of a of pressurized water reactor at a height scale of 1:1. Volumes, power ratings and mass flows are scaled with a ratio of 1:145. The experimental facility consists of four primary loops with circulation pumps and steam generators (SGs) arranged symmetrically around the reactor pressure vessel (RPV). The investigations carried out encompass a very broad spectrum from accident scenario simulations with large, medium, and small breaks, over the investigation of shutdown procedures after a wide variety of accidents, to the systematic investigation of complex thermohydraulic phenomena. The PKL tests began in the mid 1970s with the support of the German Research Ministry. Since the mid 1980s, the project has also been significantly supported by the German PWR operators. Since 2001, 25 partner organizations from 15 countries have taken part in the PKL investigations with the support and mediation of the OECD/ NEA (Nuclear Energy Agency). After an overview of PKL history and a short description of the facility, this paper focuses on the investigations carried out since the beginning of the international cooperation, and shows, by means of some examples, what insights can be derived from the tests.

Keywords

References

  1. R.Mandl, B.Brand, H.Watzinger: PKL Reflood Tests including End-of-Blowdown, $13^{th}$ Water Reactor Safety Research Information Meeting, Oct. 22-25, 1985, Gaithersburg, Maryland, USA
  2. R.Mandl, P.A.Weiss: PKL Tests on Energy Transfer Mechanisms During Small-Break LOCAs, Nuclear Safety 23 (1982) 2, March-April, 1982, pp. 146-154
  3. K.Umminger, W.Kastner, R.Mandl, P.Weber: Thermal Hydraulics Behavior of a PWR under Beyond-Design- Basis Accident, Conditions - Conclusions form a Experimental Program in a 4-Loop Test Facility (PKL), $2^{nd}$ Int. Conf. on Nucl. Engineering (ICONE-2), March 21-24, 1993, San Francisco, CA, USA; Proc. Vol. 1, pp.409-416
  4. K. Umminger, T. Mull, B. Schoen Experiments on Boron Dilution in the Integral Test Facility PKL Nureth 10, Seoul, Korea, October 5-9, 2003
  5. K. Umminger, B. Schoen, T. Mull: KL Experiments on Loss of Residual Heat Removal under Shutdown Conditions in PWRs, 2006 International Congress on Advances in Nuclear Power Plants (ICAPP '06), Reno, USA, June 04- 08, 2006
  6. R. Hertlein, K. Umminger, S. Kliem, H.-M. Prasser, T. H\ddot{o}hne, F.-P. Wei$\beta$ Experimental and Numerical Investigation of Boron Dilution Transients in Pressurized Water Reactors, 2003 Nuclear Technology 141 (1), 88-107 https://doi.org/10.13182/NT03-A3353
  7. J. Liebert, B. Brand, W. Schwarz, G. Sgarz, K. Umminger: Results of UPTF and PKL Research Projects for PWR Plant Operation, VGB PowerTech 8 (1999), pp. 20-27
  8. Y. Anoda, J. Katayama, Y. Kukita, R. Mandl: Secondary Bleed and Passive Feed during PWR Station Blackout (TMLB) Transient - Experimental Simulation at Full Pressure and Temperature, 113^{th} ASME Annual Winter Meeting, Nov. 8-13, 1993, Anaheim, CA, USA
  9. J. Hyv\ddot{a}rinen: The inherent boron dilution mechanism in pressurized water reactors Nuclear Engineering and Design 145 (1993), S. 227-240 https://doi.org/10.1016/0029-5493(93)90069-L
  10. A. Bucalossi, “Validation of Thermal-Hydraulic Codes for Boron Dilution Transients in the Context of the OECD/SETH Project”, Seminar 2, EUROSAFE, Brussels, 2005