Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Estimation of Dynamic Load of the Utility in Building by TPA Method

TPA 기법을 이용한 건물 내 설비 동하중 산정

  • Published : 2009.08.20
Download PDF
⟨ Previous Next ⟩

Abstract

The facility equipments generate dynamic force on building floor and the force can be measured with force transducer. However, this method depends on the measuring capacity or range of sensor, or mounts installation condition of equipments. Because of this restricting condition on force measuring system, this paper suggests a indirect method, the TPA(transfer path analysis) method, that produces a closely approximate dynamic force of equipments. This method calculates the dynamic force by using transfer response function. Firstly, the calculated dynamic force of impact load and continuous load was respectively compared with the sensor-measured value to examine the accuracy of TPA method. After that, the dynamic force and response induced by large facility equipments - a cooling tower, AHU and a large ventilator - were calculated by TPA method and the validity of these value were examined.

Keywords

References

  1. LMS TestLab, Cada-X User's Manual
  2. Ewins, D. J., 2000, Modal Testing : Theory, Practice and Application Research Studies Press LTD
  3. Bendat, J. S. and Piersol, A. G., 2000, Random Data : Analysis & Measurement Procedures, Wiley
  4. Liu, J.-J., Ma, C.-K., Kung, I.-C. and lin, D.-C., 2000, "Input Force Estimation of a Cantilever Plate by Using a System Identification Technique," Computer Methods in Applied Mechanics and Engineering Vol. 190, Issue 11-12, pp. 1309-1322 https://doi.org/10.1016/S0045-7825(99)00465-X
  5. Allen, M. S. and Carne, T. G., 2008, "Delayed, Multi-step Inverse Structural Filter for Robust Force Udentification," Mechanical Systems and Signal Processing, Vol. 22, Issue 5, pp. 1036-1054 https://doi.org/10.1016/j.ymssp.2007.11.022
  6. Lee, H.-J., 1994, "Prediction of Dynamic Behavior in Concrete Slab by Transfer Function Method," Master Thesis, Yonsei University
  7. Kim, S.-H., Kim, J.-H. and Lee, H.-K., 1992, "Prediction of the Exciting Force of Machine and the Vibration Response of Floor Using Transfer Function Method," Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 2 No. 4, pp. 273-280

Cited by

  1. Contribution Analysis to Identify the Source of Ship Hull Vibration vol.26, pp.5, 2016, https://doi.org/10.5050/KSNVE.2016.26.5.528