Tribology and Lubricants

  • 제25권4호
  • /
  • Pages.261-264
  • /
  • 2009
  • /
  • 2713-8011(pISSN)
  • /
  • 2713-802X(eISSN)
한국트라이볼로지학회 (Korean Tribology Society)
권호 표지
DOI QR코드

DOI QR Code

자동차 섀시 시스템에 유입되는 먼지입자에 의한 고무-씨일 부품의 마멸특성 -PART II: 먼지유입에 따른 고무-씨일의 마멸특성-

Wear Characteristics of Rubber-Seal for Inflow of Dust Particles in Automobile Chassis System -PART II: The Influence of Dust Particle Inflow on Wear Characteristics of Rubber-Seal-

  • Lee, Young-Ze (Dept. of Mechanical Engineering, SungKyunKwan University) ;
  • Chung, Soon-Oh (Dept. of Mechanical Engineering, SungKyunKwan University) ;
  • Won, Tae-Yeong (Dept. of Mechanical Engineering, SungKyunKwan University) ;
  • Kim, Gi-Hoon (Korea Automotive Technology Institute(KATECH)) ;
  • Kim, Dae-Sung (Korea Automotive Technology Institute(KATECH))
  • 발행 : 2009.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Environmental factors affect parts of the automobile. When dust particles are embedded, specially, friction and wear of the rubber-seal in automobile chassis system are increased. Increase in friction and wear leads to weakness of component and reduction of mechanical life. In this study, the wear characteristics of rubber-seal for inflow of dust particles are investigated. Silica($SiO_2$) and alumina($Al_2O_3$) particles are used as a dust particle because these particles are main elements of dust particles. The sliding wear tester are used for investigate the wear characteristics of rubber-seal. If the single dust particle($SiO_2$) is embedded in the rubber-seal component, the influence of dust particle size is more than that of inflow rate on the wear characteristics of rubber-seal. If the mixed dust particles are embedded in the rubber-seal component, the wear rate is increased as the rate of alumina that has a bigger hardness is increased. If the mixed dust particles that have different hardness are embedded in the rubber-seal component, the influence of particle size is more than that of particle hardness.

키워드

참고문헌

  1. 김경규, 이종규, 장천수, '자동차 부품 피로, 내구해석', 자동차부품연구원, 2003
  2. W.W. Sefert and V.C. Westcott, 'A Method of the Study of Wear Particles in Lubricating, Oil', Wear, 21, pp. 27-42, 1972 https://doi.org/10.1016/0043-1648(72)90247-5
  3. A.D.H. Thomas, T. Gravies and A.R Luxmoore, 'Computer Image Analysis for Identification of Wear Particles', Wear, Vol. 142, pp. 213-226, 1991 https://doi.org/10.1016/0043-1648(91)90165-Q
  4. W.Uedelhoven, M. Franzl and J. Guttenberger 'The use of Automated Image Analysis for the Study of Wear Particles in Oil Lubricated Tribological Systems', Wear, Vol. 142, pp. 107-113, 1991 https://doi.org/10.1016/0043-1648(91)90155-N