References
- Pettigrew,M.J., Taylor,C.E., Fisher,N.J., Yetisir,M., and Smith,B.A.W., 'Flow-induced Vibration: Recent Findings and Open Questions', Nuc/ear Eng. and Design, Vol. 185, pp. 249-276, 1998 https://doi.org/10.1016/S0029-5493(98)00238-6
- Khushnood,S., Khan,Z.M., Malik,M.A., Koreshi, Z.,u., and Khan,M.A., 'A Review of Heat Exchanger Tube Bundle Vibrations in Two-phase Cross-flow', Nuc/ear Eng. and Design, Vol. 230, pp. 233-251, 2004 https://doi.org/10.1016/j.nucengdes.2003.11.024
- Cho,K.H. and Kim,S.S., 'Comparison of Fretting Wear Characteristics of Zircaloy-4 Tube in Light Water and in Air', J. of the KSTLE, Vol. 15, pp. 83-89, 1999
- Fisher, N.J, Weckwerth, M.K. and Grandison, D.A.E., 'Fretting-Wear of Zirconium Alloys', Nuclear Eng. and Design, Vol. 213, pp. 79-90, 2002 https://doi.org/10.1016/S0029-5493(02)00035-3
- Park,Y.C., Jeong,S.H., Kim,J.S., Kim,Y.H. and Lee, Y.Z., 'Influence of Temperature on the Fretting Wear of Advanced Nuclear Fuel Cladding Tube against Supporting Grid', J. of the KSTLE, Vol 22, pp. 144-148, 2006
- Kim,J. S., Park,S.M., Kim,Y.H., Lee,S.J. and Lee, Y.Z., 'Fretting Wear Characteristics of the Corroded Fuel Cladding Tubes for Nuclear Fuel Rod against Supporting Girds', J. of the KSTLE, Vol. 23, pp. 130-133, 2007
- Niu,Y. and Gesmundo,F., 'Phase Stability, Kinetic Diagrams and Diffusion Path in High Temperature Oxidation of Binary Solid-Solution Alloys', J. Mater. Sci. Technol., Vol. 19, pp. 545-552, 2003
- Urbanic,Y.F., 'Zirconium in the Nuclear Industry', ASTM STP, 633, p.168, 1977
- Yau,T.L., Sutherlin,R.C. and Chang,A.W., 'Corrosion of Zirconium and Zirconium Alloys', ASM Handbook, Vol. 13B, pp. 300-324, 2005
- Chung,I., Lee,M. and Chai,Y., 'Fretting Wear Characteristics of Inconel 690 Tubes in Room Temp-erature', Trans. of the KSME, Vol. 33, pp. 329-336, 2009
- Han,J.G, Lee,J.S., Kim,W., Sun,D.S. and Chung,K. H., 'Zirconium Oxide Formation and Surface Hardening Behavior by Nitrogen Implantation under Oxygen Atrnosphere in Zircaloy-4', Surface and Coatings Technology, Vol. 97, pp. 492-498, 1997 https://doi.org/10.1016/S0257-8972(97)00162-X