Abstract
The research performed a test concerning the fluidity and strength of concrete manufactured by combining lime stone power, fly ash, and blast furnace slag into two and three component systems, aiming at evaluating rheological and dynamic properties of concrete by manufacturing High Flowing Self-Compacting according to the strength changes of three levels. As a result of the research, for High Flowing Self-Compacting of 30 MPa, the combination of lime stone power 20% and fly ash 30% for securing quality and strength and adjusting viscosity satisfied the required performance. For High Flowing Self-Compacting of 50 MPa, the combination of blast furnace slag 10% and fly ash 20% satisfied the fluidity and strength of the requirement performance. Also, for 70 MPa that has many power contents, the combination of blast furnace slag 20% and fly ash 10% for the increase of fluidity and the reduction of viscosity satisfied the required performance. It is judged that fly ash in all combinations can be used to secure viscosity and reduce concrete amount. In addition, it is judged that for High Flowing Self-Compacting according to the levels of compressive strength the combination of three component system including fly ash is more appropriate than the combination of two component system.
본 연구에서는 3수준의 강도 변화에 따른 고유동 자기충전 콘크리트를 제조하여 콘크리트의 유변학적 특성 및 역학적 특성 평가하기 위하여 석회석 미분말, 플라이애시 및 고로슬래그를 2성분계 및 3성분계 배합으로 제조된 콘크리트의 유동 및 강도 실험을 실시하였다. 실험 결과 30 MPa급의 고유동 자기충전 콘크리트는 품질확보, 강도 및 점성 조절용으로 석회석 미분말 20% 및 플라이애시 30% 배합이 요구성능을 만족하였으며, 50 MPa급의 고유동 자기충전 콘크리트는 고로슬래그 미분말 10% 및 플라이애시 20%를 사용한 배합이 소요의 유동 및 강도 특성을 만족하였다. 또한 분체량이 많은 70 MPa급의 경우 유동성 향상 및 점성 감소용으로 고로슬래그 20% 및 플라이애시 10% 배합이 요구성능을 만족하였으며, 모든 배합에서 플라이애시의 사용이 점성확보 및 시멘트 절감효과를 위하여 사용 될 수 있을 것으로 판단된다. 이상의 실험 결과를 통하여 압축 강도수준별 고유동 자기충전 콘크리트는 2성분계 배합의 경우 보다 플라이애시를 포합한 3성분계 배합이 적합한 것으로 판단된다.