Abstract
u-T (ubiquitous transportation) environment can be envisioned as an advanced version of ITS environment and be expected to provide more advanced transportation service in a ubiquitous manner. As a basic necessity to measure traffic flow in both environments, a flow estimation method was proposed. Flows have been measured in existing ITS and in a new u-T environments and some differences were investigated using simulation technique. In the interrupted traffic situation, the flow rate of u-T is 3.58% higher than that in ITS environment. Both MARE and MAE, which were used as measure of effectiveness, in u-T were better since the results are 31.4% and 31.1% lower than in ITS, respectively. Besides the equality coefficient in u-T was 1.9% higher than that in ITS. Such being the case, the flow rate measured in u-T using U-TSN is more reliable and can be expected to be successfully used for transportation system design or traffic operation areas.
u-Transportation (u-T) 환경은 차세대의 ITS로 간주되는 미래형 교통서비스로서 어디에서나 적절한 교통서비스를 제공하는 신 교통공간을 의미한다. 그러한 환경의 기초연구로서 본 연구는 기존 ITS에서 교통량 산출 방법을 검토하고, u-T 자료 수집환경(u-TSN)의 자료수집형태를 시뮬레이션으로 구현하여 ITS의 교통량 산정 결과와의 차이점을 연구하였다. 그 결과, u-T에서 단속류의 교통류율이 ITS보다 3.58% 높게 나타났으며, 평가지표 MARE와 MAE 값이 각각 31.4%, 31.1% 낮게 나타나고, 평가지표 균등계수는 1.9% 높게 나타나 상대적으로 u-TSN의 교통자료 집계가 더 우수함을 알 수 있었다. 이는 상류부 링크의 특정지점 교통량을 고려하지 못한 기존 방법론에 비해, u-T에서의 링크 특성이 잘 반영된 링크의 대표치라는데 의의 또한 있는바, 설계시간계수 등의 설계분야, 운영 분야 등에 보다 적절한 교통류율의 제공이 가능할 것으로 판단된다.