초록
본 논문에서는 앵커로 연결된 콘크리트-강재 구조물이 극한 반복주기하중을 받는 경우를 수치 시뮬레이션하기 위하여 필요한 콘크리트-앵커 부착모형에 대하여 논하였다. 제안되는 앵커의 부착-미끄러짐 수치모형은 비선형 일축 연결요소의 조합으로 이루어지며 인발실험 결과를 이용하여 부착-미끄러짐 모형의 인자를 결정할 수 있다. 제안된 앵커 부착-미끄러짐 모형을 Abaqus 요소의 조합으로 구성하고, 이를 사용한 해석 결과와 앵커의 완전부착모형을 사용한 해석 결과를 실험 결과와 비교하였다. 이로부터 극한 반복하중을 받는 콘크리트-강재 구조물 수치해석에는 합리적인 앵커 부착-미끄러짐 모형이 반드시 사용되어야 한다는 것을 알 수 있었으며 본 연구에서 제안한 합성 연결모형을 이용하면 사실적으로 앵커의 부착-미끄러짐 현상을 모사할 수 있다는 것을 확인하였다.
In this paper, a numerical anchor bond-slip model is proposed to improve the numerical simulation of concrete-steel structures connected with steel anchor bolts and subjected to extreme cyclic loading. The suggested bond-slip model is composed of a group of nonlinear uniaxial connector elements and its parameters can be determined by calibrating the model with pull-out test data. Numerical analysis results from simulating a concrete foundation-steel column structure using the proposed bond-slip anchor model, which is implemented based on Abaqus elements, and the perfect-bond anchor model are compared with the experimental results. It is concluded that a reasonable anchor bond-slip model is required to realistically simulate concrete-steel structures subjected to extreme cyclic loading, and the proposed anchor bond-slip model shows acceptable performance in the present numerical analysis.