참고문헌
- B S Nau, “Mechanical Seal Face Materials,” Proc. Instn. Mech. Engrs., 211 Part J 165-83 (1997) https://doi.org/10.1243/0954405971516158
- M. Poppp, R. Sternagel -CEROBEAR GmbH, and Herzogenrath, “Hybrid- and Ceramic Rolling Bearings with modified Surface and Low Friction Rolling Contact,” Vol. 4, pp. 1-6, EUROMAT 99, Microstructural Investigation and Analysis, Wiley Europe, 1999 https://doi.org/10.1002/3527607293.ch71
- P. A. Conner and M. T. Thew, “Trends at Three Process Plants in the Oil Industry,” Industrial Lubrication and Tribology, 47 [2] 4-11 (1995) https://doi.org/10.1108/00368799510781187
-
C. S. Abrue, M. S. Amaral, F. J. Oliveira, A. Tallaire, and F. Benedic, “Tribological Testing of Self-mated Nanocrystalline Diamond Coatings on
$Si_3N_4$ Ceramics,” Surface & Coatings Technology, 200 6235-39 (2006) https://doi.org/10.1016/j.surfcoat.2005.11.071 - A. Erdemir, “Friction and Wear of Diamond and Diamondlike Carbon Films,” Proc. Instn. Mech. Engrs., Part J: J. Engineering Tribology, 216 387-99 (2002) https://doi.org/10.1243/135065002762355316
- J. Fontaine, “Towards the use of Diamond-like Carbon Solid Lubricant Coatings in Vacuum and Space Environments,” Proc. IMechE Part J: J. Engineering Tribology, 222 1015-29 (2008) https://doi.org/10.1243/13506501JET323
- G. A. jones, “On the Tribological Behaviour of Mechanical Seal Face Materials in Dry Line Contact: Part II. Bulk Ceramics, Diamond and Diamond-like Carbon Films,” Wear, 256 433-55 (2004) https://doi.org/10.1016/S0043-1648(03)00540-4
- H.-J. Choi, H.-T. Bae, B. C. Na, J.-K. Lee, and D.-S. Lim, “Tribological Properties of Carbon Layers Produced by High Temperature Chlorination Comparison with DLC Coating,” J. Kor. Ceram. Soc., 44 [7] 375-80 (2007) https://doi.org/10.4191/KCERS.2007.44.7.375
- H.-J. Choi, H.-T. Bae, J.-K. Lee, B.-C. Na. M. J. McNallan, and D.-S. Lim, “Sliding Wear of Silicon Carbide Modified by Etching with Chlorine at Various Temperatures,” Wear, 266 214-19 (2009) https://doi.org/10.1016/j.wear.2008.06.021
- Y. G. Gogotsi, I.-D. Jeon, and M. J. McNallan, “Carbon Coatings on Silicon Carbide by Reaction with Chlorine-containing Gases,” J. Mater. Chem., 7 [9] 1841-48 (1997) https://doi.org/10.1039/a701126a
- Yury Gogotsi, Sascha Welz, Daniel A, Ersoy, and Michael J. McNallan, “Conversion of Silicon Carbide to Crystalline Diamond-structured Carbon at Ambient Pressure,” Nature, 411 283-87 (2001) https://doi.org/10.1038/35077031
- A. Erdemir, A. Kovalchenko, M. J. McNallan, S. Welz, A. Lee, Y. Gogotsi, and B. Carroll, “Effect of High-temperature Hydrogenation Treatment on Sliding Friction and Wear Behavior of Carbide-derived Carbon Films,” Surface and Coatings Technology, 188-189 588-93 (2004) https://doi.org/10.1016/j.surfcoat.2004.07.052
-
H.-T. Bae, J.-H. Jeong, D.-S. Lim, and B.-C. Na, “Dependence of
$Cl_2$ Gas Reaction Time on Tribological Properties of TiC Derived carbon Layer,” J. KSTLE, 25 [1] 20-24 (2009) - M. Kormann, H. Gerhard, and N. Popovska, “Comparative Study of Carbide-derived Carbons Obtained from Biomorphic TiC and SiC Structures,” Carbon, 47 242-50 (2009) https://doi.org/10.1016/j.carbon.2008.10.002
- S. Reich and C. Thomsen, “Raman Spectroscopy of Graphite,” Phil. Trans. R. Soc. Lond. A, 362 2271-88 (2004) https://doi.org/10.1098/rsta.2004.1454
- G. Yushin, R. Dash, J. Jagiello, J. E. Fischer, and Y. gogotsi, “Carbide-Derived Carbons: Effect of Pore Size on Hydrogen Uptake and Heat of Adsorption,” Adv. Funct. Mater., 16 2288-93 (2006) https://doi.org/10.1002/adfm.200500830
- G. Yushin, E. N. Hoffman, M. W. Barsoum, and Y. Gogotsi, “Mesoporous Carbide-derived Carbon with Porosity Tuned for Efficient Adsorption of Cytokines,” Biomaterials, 27 5755-62 (2006) https://doi.org/10.1016/j.biomaterials.2006.07.019
- J. Kovacik, S. Emmer, J. Bielek, and L. Kelesi, “Effect of Composition on Frictio Coefficient of Cu-graphite Composites,” Wear, 265 417-21 (2008) https://doi.org/10.1016/j.wear.2007.11.012