참고문헌
- N. Fukai, S. Kimura, S. Kamiyama, A. Shinoda, H. Kanai, K. Ueda, 2009, Development of application technology of pre-coated metal for fuel tank of versatile engine, Trans. Mater. Process., Vol. 18, No. 2, pp. 99-106 https://doi.org/10.5228/KSPP.2009.18.2.099
- C. J. Lee, S. K. Lee, D. C. Ko, B. M. Kim, 2008, The evaluation of surface and adhesive bonding properties for cold rolled steel sheet for automotive treated by Ar/O2 atmosheric pressure plasma, Trans. KSME(A), Vol. 32, No. 4, pp. 345-361
- A. Higgins, 2000, Adhesive bonding of aircraft structers, Inter. J. Adhesion & Adhsives, Vol. 20, pp. 367-376 https://doi.org/10.1016/S0143-7496(00)00006-3
- G. Fessel, J. G. Broughton, N .A. Fellows, J. F. Durodola, A. R. Hutchinso, 2007, Evaluation of different lap-shear joint geometries for automotive applications, Inter. J. Adhesion & Adhesives, Vol. 27, pp. 574-583 https://doi.org/10.1016/j.ijadhadh.2006.09.016
- B. R. K. Blackman, A. J. Kinloch, M. Paraschi, 2003, The use of a cohesive zone model to study the fracture of fibre composites and adhesively-bonded joint, Inter. J. Fracture Vol. 119, pp. 25-46 https://doi.org/10.1023/A:1023998013255
- J. G. Williams, H. Hadavinia, 2002, Analytical solutions of cohesive zone models, J. Mech. Phys., Vol. 50, pp. 809-825 https://doi.org/10.1016/S0022-5096(01)00095-3
- B. R. K. Blackman, A. J. Kinloch, M. Paraschi, 2003, The calculation of adhesive fracture energies in mode I: revisiting the tapered double cantilever beam (TDCB) test, Engng. Fracture Mech., Vol. 70, pp. 233-248 https://doi.org/10.1016/S0013-7944(02)00031-0
- ABAQUS Ver. 6.4, 2004, User’s manual, Hibbit, Karlsson & Sorensen Inc
- ASTM D1876, 2002, Standard test method for peel resistance of adhesives(T-peel test), ASTM
- ASTM D3433, 2002, Standard test method for fracture strength in cleavage of adhesives in bonded metal joints, ASTM
- ASTM D2095, 2002, Standard test method for tensile strength of adhesives by means of bar and rod specimens, ASTM