Performance Evaluation of Stirrers for Preventing Dendrite Growth on Liquid Cathode

액체음극에서의 금속 수지상 성장 억제를 위한 교반기 성능평가

  • Published : 2009.06.30

Abstract

An electrolytic system (zinc anode-gallium cathode) was setup to evaluate the performance of several stirrers prepared for this study, where stirrers have been used to prevent uranium from forming dendrite on the cathode in pyrochemical process. In the case of no-stirring condition, zinc dendrites began to grow on the gallium surface in 1 hour and some dendrite grew out of the cathode crucible around 6 hours. When a rectangular stirrer or a tilt stirrer was rotated, at 40${\sim}$150 rpm, to mix the liquid gallium cathode, dendritic growth of zinc metal was prevented irrespective of revolution speed, but some of the deposits overflowed out of the cathode crucible owing to the large centrifugal forces at 150 rpm. The harrow stirrer did not nearly retard the dendrite growth at 40 rpm, but the dendrite growth was retarded at higher than 100 rpm and the zinc deposits also did not overflow at 150 rpm. Pounder could also prevent the dendrite growth to some extent but it had some difficulties in operation compared with other types of stirrers.

건식공정에서 우라늄 수지상의 성장을 억제하는데 사용할 교반기를 개발하기 위하여, 수용액계로 된 모의시험 장치(아연 양극 - 갈륨 음극)에서 자체 제작한 여러 가지 교반기의 성능을 평가하였다. 교반기를 사용하지 않았을 경우에는 전착 후 1 시간 내에 액체음극 표면에서 아연이 수지상으로 성장되기 시작하여 6 시간 정도면 수지상 중의 일부가 도가니 바깥으로 자라게 되었다. 사각형 또는 경사형 교반기로 액체음극을 40${\sim}$150 rpm으로 교반하면 8 시간까지 아연이 수지상으로 성장되는 것을 억제할 수 있었으나, 회전수가 150 rpm으로 증가하면 전착물 중의 일부가 음극 도가니 바깥으로 흘러넘치게 되었다. 해로우형 교반기는 40 rpm에서는 수지상 성장을 억제하지 못하였으나, 100 rpm 이상에서는 수지상으로 전착되는 것을 억제할 수 있었고, 또한 아연 전착물이 150 rpm에서도 도가니 바깥으로 흘러넘치지 않았다. 파운더 교반기는 수지상의 성장을 어느 정도 억제할 수 있었으나 전위가 불규칙하게 변화되고 운전 장치가 복잡한 것이 단점으로 나타났다.

Keywords

References

  1. J. J. Laidler, “Advanced Spent Fuel Processing Technologies for the United States GNEP Programme”, 9th Information and Exchange Meeting on Actinide and Fission Products Partitioning and Transmutation, pp. 151-159, Nimes, France (2006).
  2. O.H. Zabunoglu and L. Ozdemir, “Purex Coprocessing of Spent LWR Fuels: Flow Sheet”, Annals of Nuclear Energy, vol. 32, pp. 151-162 (2005). https://doi.org/10.1016/j.anucene.2004.07.015
  3. H. Funasaka, T. Namba, Y. Nagaoki, T. Tsukada, K. Shiba and Y. Sagayama, “Prospects and Progress Status of the Advanced Fuel Cycle System in Japan”, Atalante 2004 International Conference, O11-03, Nimes, France (2004).
  4. S. Vavilov, T. Kobayashi and M. Myochin, “Principle and Test Experience of the RIAR's Oxide Pyroprocess”, J. Nucl. Sci. and Tech., 41(10), pp. 1018-1025 (2004). https://doi.org/10.3327/jnst.41.1018
  5. C.T. Walker, W. Goll and T. Matsumura, "Further Observation on OCOM MOX Fuel : Microstructure in the Vicinity of the Pellet Rim and Fuel-Cladding Interaction", J. Nucl. Mater., 245, pp.169-178 (1997). https://doi.org/10.1016/S0022-3115(97)00009-3
  6. H. Roepenack, F.U. Schlemmer and G. J. Schlosser, "Development of Thermal Plutonium Recycling", Nucl. Tech., 77(2), pp. 175-186 (1987). https://doi.org/10.13182/NT87-A33982
  7. 유재형, 이병직, 이한수, 김응호, "고온전해분리 기술의 개요 및 기존 핵연료주기 대체 기술로서의 적합성 검토", 방사성폐기물학회지, 5(4), pp. 283-295 (2007).
  8. 박성빈, 서중석, 강대승, 권성길, 박성원, "LiCl-$Li_{2}O$ 용융염에서 일체형 음극전극을 사용한 우라늄 산화물의 전해환원에 대한 연구", 방사성폐기물학회지, 3(2), pp. 105-112 (2005).
  9. T. Kato, T. Inoue, T. Iwai and Y. Arai, "Separation Behaviors of Actinides from Rare Earths in Molten Salt Electrorefining Using Saturated Liquid Cadmium Cathode", J. Nucl. Mater., 357, pp. 105-114 (2006). https://doi.org/10.1016/j.jnucmat.2006.06.003
  10. K. Kinoshita, T. Inoue, S.P. Fusselman, D.L. Grimmett, J.J. Roy, R.L. Gay, C.L. Krueger, C.R. Nabelek and T.S. Storvick, "Separation of U and TRU Elements from Rare Earth Elements by Means of Multistage Extraction in LiCl-KCl/Bi System", J. Nucl. Sci. Tech., 36(2), pp. 189-197 (1999). https://doi.org/10.3327/jnst.36.189
  11. T. Koyama, M. Iijuka, Y. Shoji, R. Fujita, H. Tanaka, T. Kobayashi and M. Tokiwai, "An Experimental Study of Molten Salt Electrorefining of Uranium Using Solid Iron Cathode and Liquid Cadmium Cathode for Development of Pyrometallurgical Reprocessing", J. Nucl. Sci. Tech., 34(4), pp. 384-393 (1997). https://doi.org/10.3327/jnst.34.384
  12. J.E. Battles, K.M. Myles, J.J. Laidler and D.W. Green, “Integral Fast Reactor Pyrochemical Process", Argonne National Laboratory Technical Report 1993, ANL-94/15 (1994).
  13. N. Kondo, T. Koyama, M. Iizuka and H. Tanaka, "액상 카드뮴 음극에서의 수지상 우라늄 발생 억제 조건에 대한 연구검토", CRIEPI Report, T95029 (1996).