초록
방사선량 측정을 위하여 섬광체와 광섬유를 이용한 원격 측정용 센서를 개발하였다. 유리 광섬유와 상용화된 플라스틱섬광체로 원거리 측정 가능성을 시험하였고, 에폭시 수지로 자체 개발한 섬광검출소재로 방사선 측정센서로써의 성능을 평가하였다. 에폭시 수지와 유기섬광물질의 배합별 물질 특성을 측정하여 최적의 조건을 도출하였다. 광섬유와 섬광체를 연결할 때, 불완전한 접속으로 인한 광 손실을 줄이기 위하여 섬광검출소재 제조 과정 중 소재내로 광섬유를 삽입하여 일체형으로 센서를 제조하였다. 일체형 센서는 유리광섬유의 단점을 보완하여 플라스틱 광섬유를 적용하였으며, 방사선 반응 체적별 검출효율을 평가하기 위하여 검출소재 밑단으로부터 일정 거리의 광섬유를 배치하여 측정하였다. 개발한 방사선 검출용 센서는 오염도 원거리 측정뿐만 아니라 측정센서로써의 적용도 가능할 것으로 예상된다.
Remote detecting system for a radiation contamination using a plastic scintillator and an optical fiber was developed. Using a commercially available silica optical fiber and a plastic scintillator, we tested then for a real possibility as a remote monitoring detector. Also, a plastic scintillator was developed by itself, and evaluated as a radiation sensor. The plastic scintillator was made of epoxy resin, a hardener and an organic scintillation material. The mixture rate of the epoxy resin, hardener and organic scintillator was fixed by using their emission spectrum, transmittance, intensity etc. In this study, in order to decrease the light loss of an incomplete connection between an optical fiber and a scintillator, the optical fiber was inserted into the scintillator during the fabrication process. The senor used a plastic optical fiber and was estimated for its detection efficiency by an optic fiber's geometric factor.